Questions tagged [nomencl]

{nomencl} is for questions regarding the use of the `nomencl` package to create nomenclatures. Related packages: `glossaries`, `acronym`.

Filter by
Sorted by
Tagged with
1 vote
1 answer
31 views

How to pass options to nomencl package in LyX?

LyX automatically writes \usepackage{nomencl} to a .tex document if a nomenclature is inserted via Insert → List/ToC → Nomenclature. Fine. Now I'd like to add a corresponding entry to my table of ...
zip's user avatar
  • 13
0 votes
0 answers
22 views

Numbering issue in \printnomenclature in latex

Here is the link to the latex template that I am using: https://www.overleaf.com/latex/templates/iitmdissertation-the-official-latex-template-for-theses-synopses-and-project-reports-in-iit-madras/...
ABCD's user avatar
  • 1
1 vote
0 answers
38 views

Adjusting top margin for List of Symbols and List of Acronyms using nomencl and glossaries packages

I am using the nomencl package for the List of Symbols and the glossaries package for the List of Acronyms in my LaTeX document. However, I'm facing difficulty adjusting the top margin specifically ...
Sushil Khatri's user avatar
0 votes
1 answer
29 views

Mysterious error with output.nls file and nomencl package

I am using an Overleaf template to write my master thesis, which I have to hand in in 2 days. While finalizing the Symbol and Abbreviations List, I had an error while compiling the file. As I could ...
J Faller's user avatar
0 votes
0 answers
63 views

Nomenclature of elsevier template

How do I add (Table 1:) before Nomenclature? I should look like (Table 1: Nomenclature). I used the nomencl package.
Nyam Jargalsaikhan's user avatar
1 vote
1 answer
77 views

Two lists in nomencl package and order them by appearance

Nomencl package latex: create two lists and order them by order of appearance (list with more than 100 elements) I found this solution for ordering by appearance (nomencl package : sort by order of ...
rufia's user avatar
  • 13
2 votes
1 answer
129 views

Nomenclature not showing using vimtex / latexmk compilation set-up

I would like to include a list of symbols in my notes and am trying to do this using the nomencl package. Unfortunately, I can't get it to appear. I don't any error messages, but also no output. My ...
Mike's user avatar
  • 147
0 votes
1 answer
42 views

three column nomenclature coding for the below image

creating three column nomenclature is hard, help me out
JEEVA N's user avatar
  • 11
0 votes
0 answers
25 views

nomencl order and format of subgroups

How come the subgroups do not appear in the listed order but in the alphabetical order of the prefixes? Do I have to choose the prefix to get the desired order? Can I choose the format of the subgroup ...
Delei's user avatar
  • 1
0 votes
0 answers
31 views

Is there a command to insert symbols from the nomenclature into the main document similar to /gls for glossary entries?

I'm using the nomencl package for the first time after initially building my list of symbols using the glossaries package before realizing this was not appropriate. However, from the documentation it ...
Bill's user avatar
  • 213
0 votes
0 answers
51 views

Latex nomenclature bracket

\documentclass[12pt]{report} \usepackage[intoc]{nomencl} \renewcommand{\nomname}{List} \makenomenclature \begin{document} \tableofcontents \nomenclature{b}{bus} \nomenclature{(h)}{house} \...
mala97's user avatar
  • 312
1 vote
0 answers
110 views

Alphabetical order with nomenclature

Good evening everybody, I am having a problem with the \nomencl package (with TeXstudio, the code is reported below). I separated the nomenclature into "Acronyms", "Greek Letters", ...
Riccardo Rinaldi's user avatar
0 votes
1 answer
36 views

Nomenclature generation fails on custom template class

I use this template class for my master thesis. It is very helpful and neat. However... I am not able to generate a nomenclature on it. I contacted the template's author but is very busy at the moment....
Bruno Peixoto's user avatar
0 votes
1 answer
45 views

LaTeX not compiling with nomencl package and custom .sty file when inputting another file

I am using my university's custom .sty file (cuthesis.sty) to write my thesis. It's been working fine up until now, but when I recently tried to start using the "nomencl" package, it just ...
rpinto73's user avatar
0 votes
1 answer
34 views

Nomencl with nomentbl option and custom chapter in TOC

I'm trying to use the nomentbl option with the nomencl package and at the same time add a numbered chapter to the TOC, where I have a custom name for the nomenclature chapter title. I get the custom ...
grr473's user avatar
  • 67
2 votes
1 answer
242 views

Create nomenclature with 3 columns

I'd like to create a nomenclature which has three columns (Symbol, Beschreibung, SI-Einheit). So it should look like this: My code \documentclass[ pdftex,a4paper,11pt,oneside,fleqn, ...
Domi1908's user avatar
1 vote
0 answers
64 views

Nomenclature not showing

I'm composing a Master's Thesis on TexMaker. There is a Thesis.tex file which calls for every other file (Chapters, Thesis_Abstract, Thesis_Acknowledgements, Thesis_Dedication, Thesis_FrontCover, ...
Nuno L. Nunes's user avatar
1 vote
1 answer
349 views

`nomencl`: error "Undefined control sequence. <argument> \list@fname"

I am writing a large document with a nomenclature using nomencl. Some \nomenclature{foo}{bar} entries cause the following error: Undefined control sequence. <argument> \list@fname I am trying ...
Benedikt Ahrens's user avatar
0 votes
1 answer
170 views

Add further grouping to nomenclature using {nomencl} + {etoolbox}

To add a nomenclature to my master thesis I follow overleaf's recommendation and use below code. Grouping is quite important for me. Unfortunately, I cannot figure out how to create subgroups by using ...
Pax's user avatar
  • 103
1 vote
1 answer
78 views

How do I display list of symbols without using documentclass?

I am using a template provided by the school to write my thesis. On the main.tex I am using \documentclass[11pt]{thesis}. Now I am trying to add a list of symbols page, I am using this code \...
Starrrrck's user avatar
0 votes
0 answers
207 views

Nomenclature using \nomencl with units far right and reference

I've been struggling to make nomenclature using the \nomencl package that has units at the far right but also a reference to an equation and or a page. Here is an MWE with auto-inserted references to ...
sirdickens's user avatar
0 votes
1 answer
189 views

How to put a box around a single page? [duplicate]

I used nomencl and created a page of nomenclatures in my paper, I want to put this page and this page only into a box, while everything else are to remain the same. I tried the following code I found ...
keroro's user avatar
  • 33
0 votes
0 answers
39 views

nomenclature references to wrong page

I am adding acronyms and using the nomenclature package, it is somehow however on click referencing to the list of tables page instead of the nomenclature page. What is the problem? I am also getting ...
QUTADAH's user avatar
0 votes
1 answer
226 views

How to increase the distance between two columns in nomencl?

I got trouble when i use the package of nomencl When the symbol in the first column is long, how can I increase the distance between two columns in my nomenclature by virtue of package nomencl? As ...
KS.J's user avatar
  • 3
0 votes
0 answers
56 views

Nomenclature gets shown twice, when the key is written twice: wanting only once

I'm formatting documents, which will then get compiled as a final document. The problem arises when I'm working with nomenclature, each separate document has a nomenclature with a single key with a ...
Arlindi Frakulla's user avatar
2 votes
2 answers
155 views

How to get the entries in a two-column nomenclature to align together?

I would like to create a nomenclature with two columns. One column does not seem to align very well with the other. It seems as though this is happening due to insertion of small empty space by \...
Al-Motasem Aldaoudeyeh's user avatar
1 vote
1 answer
60 views

List of symbols - last entry in the output has the unit column shifted right

The attached image shows the last two entries in the list of symbols in the pdf output. I used the code: \nomenclature{X, Y, Z}{Forces along X, Y and Z axes \nomunit{\si{\newton}}} \usepackage[intoc,...
Pooja's user avatar
  • 25
0 votes
1 answer
51 views

Exclude nomenclature and glossary from page count

I want both, the nomenclature and glossary, be excluded from the page count. They are not appearing in the toc yet they still increases my number of pages. How can I say from which page on my total ...
GaTe92's user avatar
  • 31
0 votes
1 answer
126 views

wrong entry in .nls file using nomencl

I'm writing a large report using MikTex and I'd like to add a nomenclature. I successfully created .nls and .nlo files. However, I forgot a $ in one of the entries and this generates the following ...
eve91's user avatar
  • 1
0 votes
1 answer
838 views

Two column nomenclature with title above the columns

I'd like to print a nomenclature in two columns while keeping the title outside (above) the columns, starting from this: I used multicols as suggested here, but it includes the title in the first ...
user242399's user avatar
0 votes
1 answer
308 views

Changing font type and size of nomenclature

I am preparing a manuscript using Elsevier cas-dc.cls class. In that I have added a nomenclature using package nomencl. While I would like the font type and size to be the same as the rest of the ...
Adnan Ali's user avatar
  • 229
1 vote
1 answer
39 views

Use the nomencl and listing packages to include a command summary

I am writing a document related to computer science and I want to include a short summary of the commands that appear through the text at the end. I am using the listing package to handle the code and ...
videbar's user avatar
  • 11
1 vote
1 answer
345 views

Unique \nomlabelwidth for each \nomgroup with nomencl package

in my thesis I use the nomencl package with different groups. Since a few entries in one group are fairly long, I'd like to specifically increase the \nomlabelwidth in this \nomgroup. Globally ...
J. Hund's user avatar
  • 37
3 votes
1 answer
104 views

Sort entries under abbreviations and symbols according to their section

How do I sort the entries corresponding to each section of my document under abbreviations and symbols? In other words, I want a structure like this: Abbreviations Section 1 Section 2 ... Last section ...
thisismetrying's user avatar
1 vote
0 answers
35 views

Nomenclature not working with automatic counter for entry sequence

I have a nomenclature for my file and I was trying to override the default sorting for the nomencl package using a custom counter, indnom but it's not working. I want them in the order: A, Z, G, B ...
Shihab Khan's user avatar
3 votes
1 answer
488 views

Nomencl not being printed no nls file [duplicate]

Written article, but nomenclature is not printed. Using Texmaker with MikTEX. I have configured the Makeindex file locations as in the examples. makeindex <filename>.nlo -s nomencl.ist -o <...
4gottenMyMaths's user avatar
1 vote
1 answer
138 views

Different Format for Nomenclature or List of Abbreviations

For several types of scientific papers, it might be handy to have a separate page devoted on the nomenclature. With using this setup, the nomencl-package can be used. For one type of paper, however, I ...
Dave C.'s user avatar
  • 11
1 vote
1 answer
132 views

How to shift nomenclature list toward right?

The list of nomenclatures is using the same margin as the document. How can I shift it toward slightly right? Currently, It looks like this: Using this code: \documentclass{article} \usepackage[utf8]{...
user1099's user avatar
1 vote
1 answer
97 views

xpatch bug in texlive 2019?

I am running the slightly modified example with pdflatex and then makeindex (makeindex -s nomencl.ist -o myfile.nls myfile.nlo) \documentclass[]{article} \usepackage{xpatch} \usepackage{nomencl} \...
pluton's user avatar
  • 16.4k
0 votes
0 answers
379 views

remove nomenclature header in elsarticle appendix

I have the following code: \documentclass[authoryear, review]{elsarticle} %preprint \usepackage{xpatch} \usepackage{nomencl} \xpatchcmd{\thenomenclature}{% \section*{\nomname}% Look for `\section*...
Euclides's user avatar
1 vote
1 answer
127 views

Add hyperlinks to glossary entries in lyx document

I want to have hyperlinks to my nomenclature, poining to the definition of those. For now I use the nomencl package with lyx, was a pain to set it up, should have used latex in the first place. This ...
AldegarRızvan's user avatar
0 votes
1 answer
682 views

I keep having an empty page in front of my nomenclature

I am doing a project work report and I keep getting the same problem. I have a nomenclature and just before it an empty page with the heading "Stichwortverzeichnis" which is german for index ...
splitterfanger's user avatar
0 votes
0 answers
24 views

problem with nomenclature while uploading to Scholarone manuscript?

I am uploading the manuscript to Scholrone manuscript. All things are running properly but not printing nomenclature part and not showing any error. I have run the same manuscript with Texmaker it is ...
MANISH KUMAR's user avatar
0 votes
2 answers
609 views

Nomenclature Package and Appendices

There are a lot of similar posts to this but I have yet to find one that correctly solves my issue. The tl;dr is: How do I make nomenclature produce only a list of variables without producing a new ...
Daniel M's user avatar
1 vote
1 answer
265 views

Indentation for Nomenclature in ToC in Book class

I am writing a dissertation and want to use nomenclature. I would like to align the nomenclature entry in ToC with (Dedication, preface, etc ). Here my MWE. Thanks. \documentclass[a4paper, 11pt, ...
Benzene's user avatar
  • 47
0 votes
2 answers
1k views

How can I decrease font size in LaTeX nomenclature using nomencl package?

I have used nomencl package to create my papers nomenclature. The problem, however, is that the font size is 12pt, which is very large and takes many pages for nomenclature. How can I decrease the ...
Saed Zeynali's user avatar
1 vote
1 answer
157 views

Nomencl + KOMA style + flush right units = misalignment

I am formatting my nomenclature list at the moment. I matched the style of the rest of the document via this answer and then attempted to flush the units right via this answer. Details are below, ...
headingofgroupc's user avatar
2 votes
1 answer
959 views

LaTeX Error: Command \ifnumber already defined with the use of nomenclature

I am having issues getting my nomenclature package to show when I compile. After some searching I believe that there might be some package-interference. I have tried looking in the output.log file, ...
Tor's user avatar
  • 23
1 vote
1 answer
774 views

How to add page numbering in nomenclature to link to an arbitrary page with a "label"?

I like to create a nomenclature that shows a page number (with \pageref or \hyperlink, etc) pointing to a page elsewhere that I assigned a label. Possibly, this label should be an argument to the ...
Sia's user avatar
  • 209
10 votes
1 answer
464 views

Can't use bars | | in nomenclature package

Here's a weird error that I'm running into using the nomenclature package nomencl The following code : \documentclass{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{...
Perturbative's user avatar