Questions tagged [nomenclature]
{nomenclature} is for questions related to a cross-referenced list of mathematical symbols and abbreviations.
0
votes
1answer
17 views
Nomenclature in Texshop
I have been trying to add Nomenclature to my thesis. I have found that I have to create a Nomenclature.engine and run it so that it would show up in the final file. This file, as per many answers on ...
2
votes
1answer
31 views
help with nomenclature groups and ifthenelse
I am grouping my nomenclature symbols. I'm using the answer from this post:
How to make section in Nomenclature?
The syntax I've used is this:
\renewcommand{\nomgroup}[1]{%
\ifthenelse{\equal{#1}...
0
votes
0answers
20 views
Increase space between groups with package nomencl & etoolbox
I am writing a document and I need to have a table of notations. I wanted to reduce its size while keeping a good space between the different groups. I understood that:
I can use \setlength{\...
0
votes
0answers
23 views
Printing only one group with nomencl
I need to print only one group of my nomeclature list per page in my document. My code is:
\documentclass{book}
\usepackage{nomencl}
\makenomenclature
\renewcommand{\nomname}{Nomeclature Title}
\...
1
vote
1answer
50 views
changing name of “nomenclature” not working in lyx
why could it be that the suggested command won't work in Lyx? I am using the "Book (standard) class". Thank you, everyone!
\renewcommand\nomname{New Name for Nomenclature}
edit:
I have to enter the ...
0
votes
1answer
60 views
Order of appearance in nomenclature [duplicate]
In fact I want to have a two columns nomenclature in order, but when I write them in order in the result they are not in the order, I have already read the nomencl package : sort by order of ...
0
votes
0answers
17 views
Nomenclature sorting problem: it starts sorting again in a new page
I have the nomenclature sorted in an alphabetical order, but it starts over on the next page. See attached picture.
Does anyone know how I can make so it doesn't start over when after a page shift?
...
0
votes
0answers
22 views
Making nomenclature span over two columns [duplicate]
I have a long list of variable dimensions which I want to stack in two columns over the page, how can I do this? This is my code:
\newpage
\mbox{}
\nomenclature{$\rho$}{$ML^-3$}
\nomenclature{$u$}{$...
0
votes
2answers
40 views
Aligning definitions for acronyms/abbreviations
I am currently doing a "Nomenclature" type list in my thesis (attached image).
I am using a template provided by the university for this particular section:
\usepackage{usnomencl}
:
\chapter{...
4
votes
2answers
84 views
Norm Symbol in Nomenclature not showing
When I have symbols like $\|\|$ in a nomenclature entry, then the entry doesn't show. Using this minimal example:
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\...
2
votes
1answer
46 views
Starting a nomenclatur group on a new page using nomencl
I have two nomenclature groups. Is it possible to force one to start on a new page? I've also reduced the line spacing, but it'd be nice if I could keep the spaceing between the group name and the ...
0
votes
1answer
57 views
Change “List of symbols” to “List of Symbols”
I'd just like to change "List of symbols" to "List of Symbols" in my thesis. How to do this?
I'm using these lines of code:
\input{inc/nomenclature}
\markboth{\nomname}{\nomname}
\renewcommand{...
1
vote
1answer
38 views
How to make only a list of abbreviations?
I am using How to create both list of abbreviations and list of nomenclature using nomencl package? to create a list of abbreviations. The code is below:
\usepackage{nomencl}
\usepackage{etoolbox}
\...
0
votes
1answer
40 views
nomenclature and \verb|text|
I tried different solutions but without result
I have configured arara on texstudio to be able to use the nomenclature package.
\usepackage[refpage,intoc,italian]{nomencl}
\makenomenclature
\...
0
votes
0answers
23 views
How could I create content page in share latex
I want to write down a latex document using share latex.
Document looks like that
Content
List of Figure pageNo
List of Table pageNo
List of Algorithms ...
0
votes
1answer
149 views
Nomenclature and Index does not show up in a standard thesis template
Well, hello folks,
I am writing a thesis in a specific latex template that my department created.
I simply imported the zip file of the template into an overleaf project, and compiled. However the ...
1
vote
1answer
35 views
Nomenclature groups in different pages
I wish I could have the groups inside nomenclature in different pages each and their titles centered. So far I tried the following MWE:
\documentclass[10pt,a4paper]{article}
\usepackage[utf8]{...
1
vote
1answer
104 views
Nomenclature Having Two or More descriptions and Units for a symbol
I am using the following nomenclature setup
With the following code
\usepackage{siunitx}
\sisetup{%
inter-unit-product=\ensuremath{{}\cdot{}},
per-mode=symbol
}
\usepackage{nomencl}
\...
0
votes
0answers
34 views
1
vote
0answers
101 views
Need help with using glossaries-extra package (Texpad, MacOS)
I am trying to work on a thesis following a template from my university, and I am having trouble making a 'Nomenclature' and 'Symbols' list. I am able to successfully make a 'Glossary' and '...
0
votes
0answers
29 views
LyX: How to make lowered letters for nomenclature?
I want to have a lowered letters for my nomenclature.
This is my LyX-Passage:
But it looks like this when I print the Pdf:
How can do this?
5
votes
1answer
461 views
Ordered symbols list with units
I would like to create a symbols list using \makeglossaries, but, it has to be ordered and the symbols must have their respective units too.
On the quest for a solution to my issue I came across two ...
1
vote
1answer
62 views
Special characters you should be careful when using in nomenclature [duplicate]
I'm struggling to write |.| in nomenclature in LaTeX.
It works for the first item in the nomenclature, but not working for the second item in the following:
\documentclass[10pt,journal]{IEEEtran}
\...
0
votes
1answer
137 views
How to add and change nomenclature entries with subheading like: symbol, description and unit?
I adapted the nomenclature from this post here: How to achieve nomenclature entries like: symbol, Description, Dimension and unit, etc?
but I had diffulties to adapt it for my own purpose.
This is ...
0
votes
1answer
274 views
Nomenclature list not getting updated
I am using \usepackage{nomencl} to define a list of symbols...
For example
\nomenclature[B]{$\varepsilon$}{Permittivity \nomunit{$Farads/cm$}}
\nomenclature[B]{$a$}{Lattice constant\nomunit{$\AA$}}
...
2
votes
1answer
129 views
Using \! for spacing in nomenclature
I have a symbol in my nomenclature that needs a negative thinspace command \! in the subscript. But whenever I try to do that in the nomenclature, it fails to compile. The error I get is:
Missing $ ...
0
votes
0answers
43 views
How to add nomenclature automatically as like list of figures and table of contents?
I am using the below given document class. help would be appreciated :)
\documentclass[\classfontsize,\papersize,twoside,showtrims,extrafontsizes]{memoir}
0
votes
0answers
34 views
nomenclature: only some shown in the text
I am using TexStudio. I use the following command to compile the code:
pdflatex main.tex && makeglossaries main.glo && pdflatex main.tex && bibtex main && pdflatex ...
5
votes
1answer
214 views
Problem having a Nomenclature with multicolumn categories and label alignments
I'm trying to make a list with nomenclature using the nomencl package. I have been looking for solutions about what I want, but I've not been lucky so far (and I'm not an expert in these matters).
I ...
0
votes
0answers
154 views
nomenclature for thesis
Hello everybody I am using these packages in my preamle to print list of abbreviations:
\usepackage{nomencl}
\makenomenclature
and
\printnomenclature where to print it.
and inside the document I ...
1
vote
0answers
86 views
No output while using Nomenclature
When I tried to write a sample 'nomenclature' page , I get no output text and I get just a blank page with a page number.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{nomencl}
\...
2
votes
1answer
242 views
Automatic parameter definitions under equations
For my bachelor thesis, I am using a lot of equations in my document. I would like to use a list of symbols, including units and also add a parameter description under equations.
I want to be ...
1
vote
0answers
121 views
Using Sharelatex for nomeclature is not working
Trying to get a list of nomenclature together for my bachelor but it's not working. I have a main file and everything in seperate files(not sure how good of an explanation this is, not very good at ...
0
votes
1answer
240 views
How change order of groups in nomenclature?
This example will print the groups: Physics Constants, Number Sets, Other Symbols.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{amssymb}
\usepackage{nomencl}
\makenomenclature
%%...
0
votes
0answers
37 views
Vertical alignment in nomenclature (with inserted images) + change indent for part of the list
I have a problem with nomenclature. I use both inserted images and text in the list of nomenclature, so the resulting list look awful. (See below)
I want at least to align VERTICALLY the nomenclature ...
2
votes
1answer
695 views
How to add List of Abbreviations to Table of contents with a specific group outline
How can I add my List of Abbreviations and nomenclature to the table of contents with the following code? I tried \addcontentsline{toc}{?}{?} but do not know what I should write in last two brackets. ...
0
votes
0answers
129 views
How can I create different Nomenclature lists for each chapter?
I am writing my PhD Thesis, which has several chapters. I want to create different nomenclatures for each chapter like this:
Chapter 3
Nomenclature of Chapter 3
Chapter 4
Nomenclature of Chapter 4
......
1
vote
1answer
548 views
List of abbreviations when abbreviations are in a separate folder
I have looked a several sources to answer this question, including textblog, latex.org and sharelatex. I have copied the code and although I do not get any errors I do not get a list of abbreviations ...
1
vote
1answer
78 views
List of symbols and units under an equation
I have many equations in my report and want to add a list (like the one shown below) below all of my equations (not a separate nomenclature list at the end). Kind of like a mini-nomenclature. Also ...
1
vote
0answers
275 views
Nomenclature with different groups for IEEE Transactions
I want to create a Nomenclature for IEEE Transactions on Sustainable Energy with different groups, such as: Indices, Parameters, Sets and Variables. I have seen that there is a line break between each ...
0
votes
0answers
600 views
Nomenclature not working
Trying to print my nomenclature in my document.
I am not sure where to put the \makenomenclature and \printnomenclature command. Tried several things, but they are not working. The question is: where ...
1
vote
2answers
566 views
problem with elsarticle and nomenclature
hello please i try the nomenclature with elsarticle but it doesn't work. Could help please. Thank you
\documentclass{elsarticle}
\usepackage{framed} % Framing content
\usepackage{multicol} % Multiple ...
1
vote
1answer
90 views
Make nomenclature in {longtable} comply with {geometry}?
During the writing of my thesis, I found that the long lines within the Nomenclature, created by longtable, always exceed the length limit of geometry in the preamble. Could you suggest me how to ...
2
votes
1answer
185 views
Make nomenclature as a subsection of a chapter
I am writing my Phd Thesis. For a chapter, I want as a first section the introduction and as a second the Nomenclature.
When I use the \printnomenclature, there are two clear pages skipped before ...
2
votes
1answer
768 views
List of symbols and abbreviations separately
I needed to get list of symbols and abbreviations for my thesis, by following the MWE which I have got from How to create both list of abbreviations and list of nomenclature using nomencl package?
I ...
1
vote
2answers
277 views
Remove Space Above Nomenclature Title in Article Class
I am using article document class and I am making all my section titles appearing centred at top of page. I am making a separate page for the nomenclature using \usepackage{nomencl} and everything is ...
1
vote
1answer
212 views
Nomenclature indentation
I am writing an article and I need to use a predefined class. The nomenclature is coded as an environment like this:
\documentclass[12pt]{article}
\newbox\tempbox
\newenvironment{nomenclature}{%
\...
1
vote
0answers
261 views
How to split Nomenclature into symbols, greek, and subscript groups, but retain alphabetical groups of Abbreviations and Glossary
I have a document with Abbreviations, Nomenclature, and Glossary sections. Some nomenclature entries also add glossary terms.
I'd like to split my Nomenclature groupings into something like Symbols, ...
0
votes
0answers
89 views
Nomenclature problem displaying blank lines
I want to use nomenclature but once I type the nomenclatures it doesn't appears in the document I got only a blank square where normally should be my nomenclatures
\documentclass[review]{elsarticle}
...
1
vote
1answer
1k views
Misplaced alignment tab character &
Get that error when i use \listofnomenclature{ll}
it is defined as so in the Thesis.cls file
}
\newcommand\listnomenclature{Symbols}
\usepackage{longtable}
\newcommand\listofnomenclature[2]{
\...
