Skip to main content

Questions tagged [numbering]

{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

Filter by
Sorted by
Tagged with
610 votes
5 answers

How can I make an enumerate list start at something other than 1?

Sometimes, I want to have enumerate lists in LaTeX start at other than the first value (1, a, i, etc.) How can I make an enumerate list start at an arbitrary value?
vanden's user avatar
  • 31k
426 votes
10 answers

How do I change the `enumerate` list format to use letters instead of the default Arabic numerals?

I've seen documentation whereby an \alph command is put around the \begin{enumerate} somewhere, but I'm not entirely sure how that operates...
Billy ONeal's user avatar
  • 10.4k
351 votes
10 answers

What's the quickest way to write "2nd" "3rd" etc in LaTeX?

If I want to use abbreviations for second, third and so on in my LaTeX documents, I am currently doing this: 2$^{nd}$ which seems unsatisfactory. Is there a macro I'm missing? I'm sure I could define ...
Seamus's user avatar
  • 73.3k
249 votes
6 answers

Symbols instead of numbers as footnote markers

How can I make LaTeX use symbols (*, †, ‡, and so on) instead of numbers to mark footnotes? (The numbers are confusing because I use superscripted numbers for citations.)
Vebjorn Ljosa's user avatar
246 votes
4 answers

Continuous v. per-chapter/section numbering of figures, tables, and other document elements

Some document elements (e.g., figures in the book class) are numbered per chapter (figure 1.1, 1.2, 2.1, ...). How can I achieve continuous numbering (figure 1, 2, 3, ...)? And vice versa: Some ...
lockstep's user avatar
  • 251k
193 votes
4 answers

How to get only one vertically centered equation number in align environment with two equations

What I have are two equations with align and I want one single equation number to refer to this system of equations. To illustrate, I have \begin{align} dr_t &= \kappa ( \theta - r_t ) dt + \...
Paul Koer's user avatar
  • 3,495
185 votes
7 answers

How do I turn off equation auto numbering

I have an equation like this: \begin{align} P(A \cup B) = \sum_{\omega \in A \cup B} P(\omega) = \sum_{\omega \in A} P(\omega) + \sum_{\omega \in B} P(\omega) = P(A) + P(B) \end{...
user1046's user avatar
  • 1,953
184 votes
1 answer

enumerate tag using the alphabet instead of numbers [duplicate]

The default behaviour for the \begin{enumerate}tag is to sequentially list the items given by \item over the numbers {1, 2, 3, 4, ...}. Is it possible to change this to the alphabet {a, b, c, d, ...}...
CodeKingPlusPlus's user avatar
175 votes
6 answers

align* but show one equation number at the end

I am using align*, but I still need an equation number. I know one solution is to use align and add \nonumber to all lines but the last. Is there a 'lazy' way to do it? I searched a little and found ...
digit plumber's user avatar
169 votes
3 answers

Creating unnumbered parts/chapters/sections (plus adding them to the ToC and/or header)

I'm using the report document class for a thesis, and I need to add things like "Acknowledgements" and an "Introduction". I noticed that there is an \abstract command which would have been wonderful ...
Ayman Elmasry's user avatar
154 votes
2 answers

How to change the numbering of \part, \chapter, \section, ... to alphabetical, Roman numbers, etc

I'm fairly new to LaTeX and I want to know how to change the way sections are numbered by default. I use LyX, and there it is relatively simple to change the way an enumeration is numbered, i.e. 1 ...
David Berger's user avatar
  • 1,643
143 votes
2 answers

Why does an environment's label have to appear after the caption?

\documentclass{article} \usepackage{algorithm} \begin{document} \setcounter{section}{54} \section{A section with no label} \begin{algorithm} \label{myalg} \caption{An algorithm with the label `myalg'....
einpoklum's user avatar
  • 12.3k
141 votes
5 answers

Adding unnumbered sections to TOC

I have many unnumbered sections in my report (more than 100), all created with: \section*{section name} I want to find a way to easily add them all to the TOC (specifically to a minitoc). Since I ...
Weslei's user avatar
  • 4,025
129 votes
7 answers

Change figure numbering for appendix

I want to "reset" the figure counting in my document when the appendix starts, and follow a different pattern than 1, 2, 3... Specifically, I want figures in the appendix to start with A.1, A.2 onward,...
Maarten's user avatar
  • 1,653
120 votes
3 answers

Theorem without numbering

Is it possible to have single theorems without numbering? I would like to be able to switch them off individually with asterisk-* or have a nono-theorem environment. \newtheorem{theorem}{Theorem} \...
Sebastian's user avatar
  • 1,917
119 votes
10 answers

Defining commands/abbreviations that contain numbers

I tend to use \newcommand to define macros for symbols I use often, e.g. \newcommand{\hankel}{H^{(1)}_0}. One inconvenience of this approach is the fact that command names cannot include numbers. ...
Leo Alekseyev's user avatar
113 votes
1 answer

How to show subsubsections and paragraphs in TOC?

So we have something like: \documentclass{article} \setcounter{secnumdepth}{2} \setcounter{tocdepth}{2} \usepackage{amsmath} \begin{document} \tableofcontents \section{Brushless Motor Fundamentals}...
Kabumbus's user avatar
  • 1,805
109 votes
1 answer

Reference to a figure uses the section's number

One of my sections seems to be using the section number rather than the appropriate figure number for \ref's that point to figures. (Theorems and the like work fine.) As far as I can tell, there's ...
hoyland's user avatar
  • 1,796
102 votes
9 answers

How do I repeat a theorem number?

Often in my papers I want to mention theorems in the introduction that are introduced in more detail and proved in a later section. I'd like to include the statement of these theorems twice over, ...
Scott Morrison's user avatar
92 votes
4 answers

Beamer: \nonumber equivalent for slides?

Is there an equivalent command to \nonumber when one doesn't want to include certain slides in the numbering? I would like to leave outline and title slides out of my numbering, and instead just ...
Ezekiel375's user avatar
  • 1,021
91 votes
2 answers

Continuous footnote numbering

I would like footnote numbering to continue over pages and chapters. In my document it's reset every chapter. I'm using the report documentclass.
Robert Massa's user avatar
  • 1,135
91 votes
2 answers

How do I number equations only if they are referred to in the text?

I have a paper where all equations are numbered, but I want to number equations only if they are actually referred to in the .tex file using \ref{}. How can I make that happen? Alternatively, how can ...
klew's user avatar
  • 999
88 votes
2 answers

Beamer Presentation: Figure has no number?

I am giving a presentation and therefore I am using the beamer class. I have included some figures and it works, but there is no number after "Figure". My code: \documentclass{beamer} \usepackage{...
Jen Bohold's user avatar
  • 1,479
87 votes
6 answers

Something like \enumerate, but with custom numbers at each \item

I'm doing homework from a particular book, and each question is numbered after the page number and the question number. For example 52.2, 52.9, 53.13, etc. (Note that they are not sequential.) How do ...
iDontKnowBetter's user avatar
86 votes
1 answer

Getting section numbering to start at 0

\documentclass[11pt,a4paper]{article} \usepackage[T1]{fontenc} \usepackage{lipsum} \usepackage{tocloft} \begin{document} \tableofcontents \thispagestyle{empty} \...
TheRealFakeNews's user avatar
85 votes
2 answers

Theorem/Definition/Lemma problem --- Numbering

I am trying to work on the numbering of the theorems/definitions/lemmas etc., and I have some problems with the numbering. I would like the theorems, propositions, corollarys, definitions, ...
Gary's user avatar
  • 2,033
82 votes
1 answer

repeating an equation and getting the same equation number?

Let's say I have written an equation in my paper and numbered it: y = a + bx (1) Then, later in the paper, I want to remind the reader by showing the same equation with the same equation number. ...
phil's user avatar
  • 821
80 votes
3 answers

Section numbering without numbers

I want to add a section without a number, but \section* also excludes it from the numbering, so if there is this \section*{Section 1} \subsection{Subsection} \subsection{Subsection 2} \section*{...
Nuria's user avatar
  • 935
77 votes
4 answers

Numbering appendices by letter instead of number

I'm trying to get a hold of numbering the letter of the appendices. This is how it looks now: \documentclass[11pt, a4paper, twoside]{article} % PACKAGES \usepackage{geometry} \usepackage{lipsum} ...
Budde92's user avatar
  • 773
76 votes
1 answer

Change the type of equation numbering in document class article [duplicate]

Possible Duplicate: Continuous v. per-chapter/section numbering of figures, tables, and other document elements I have written my thesis in document class 'article' (don't ask me why). Now I want ...
Wolfgang's user avatar
  • 981
70 votes
4 answers

Custom theorem numbering

This one should be easy for the gurus… Suppose I want to define a theorem environment which has a custom numbering scheme. That is, instead of being numbered according to some counter, it is numbered ...
Skeptic's user avatar
  • 3,025
69 votes
1 answer

Nested enumeration numbering

I write homework assignments in LaTex and the assignments are always divided into subparts (i.e. Problem 1 is divided into 1.1, 1.2, 1.3, ...). Currently what I do is I have nested enumerations, but ...
nickhirakawa's user avatar
68 votes
3 answers

Turn on subsection numbering in memoir

It seems that the memoir class automatically avoids numbering subsection headings. Chapter and section titles are numbered, but subsection headings contain only the subsection name, and are not ...
user avatar
65 votes
7 answers

Beamer frame numbering in appendix

I have a beamer presentation in which I have some additional slides in an appendix. The additional slides are only there in case someone asks a specific question; I won't necessarily have to use any ...
ESultanik's user avatar
  • 4,420
65 votes
1 answer

Sections indexed with numbers, subsections with letters

Is it possible to set the environment in such a way that sections are indexed with numbers, and subsections with letters? I mean, I'd like to have the following result: 1 First section 1.a First ...
Abramodj's user avatar
  • 1,268
63 votes
3 answers

\nameref -- How to display section name AND its number

Is it possible to make \nameref display not only the title of the section but also its number? \section{First Section} \label{sec:some_sec} \subsection*{Unnumbered subsection} \label{sec:subsec} [.....
cpt. jazz's user avatar
  • 885
62 votes
6 answers

How to display numbers using comma as a thousands separator?

I want numbers like 5.5 million to be displayed using a comma as a thousands separator as "5,500,000". Is there a way to do this automatically, without having to manually put commas?
donatello's user avatar
  • 1,723
59 votes
4 answers

\footnotetext numbering for many \footnotemark - automatic solution

\documentclass{report} \begin{document} Text\footnote{text1} Text\footnote{text2} \vbox{% \begin{itemize} \item X\footnotemark{} \item Y\footnotemark{} \item Z\footnotemark{} \end{itemize} } \...
Grzegorz Wierzowiecki's user avatar
57 votes
3 answers

footnote counter, would like to restart from '1' each page

I would like the footnote counter to automatically restart from '1' for each page of my document.
Caroline Fontaine's user avatar
56 votes
9 answers

How to number slides with an increasing number of digits of pi?

How to number frames with an increasing number of digits of pi? Illustrative, I want the frame numbers to be like 3 (on the first slide) 3.1 (on the second slide) 3.14 (on the third slide) ... and ...'s user avatar
56 votes
3 answers

Table numbering mismatch in caption and in text

I have created 2 tables in my LaTeX document: \begin{table}[hb] \centering \begin{tabular}{|c|c|r|} \hline ... not important... \end{tabular} \label{tab:2} \caption{Določanje prioritet mojstrov ...
71GA's user avatar
  • 3,573
56 votes
4 answers

Automatic table row numbers

Is there any way to get automatic row numbers in table? For example, if I define table contents as \begin{tabular} % black magic column definition \rownumber & foo\\ \rownumber & bar\\ ...
miah's user avatar
  • 663
55 votes
5 answers

How to remove chapter numbering without removing it from table of contents

It seems I have spent two days trying to find out the solution to my problem. I have just finished typing my M.Sc thesis using Latex (MIKTEX 2.9). Unfortunately, all my chapters begin with the chapter ...
Hassan's user avatar
  • 757
55 votes
2 answers

One chapter without numeration

How can I make one chapter (Introduction) without number? I have: \documentclass[12pt,a4paper]{mwrep} \chapter{Introduction} \chapter{Chapter 1} \chapter{Chapter 2} In ToC I have: ...
Ichibann's user avatar
  • 8,381
54 votes
3 answers

Increment the section number with 1, not 0.1 [duplicate]

Possible Duplicate: Section numbering I'm happy with the logical layout of my document, but the section numbering is bugging me. I'd like the first section (the introduction) to be 1, not 1.1. ...
Emanuel Berg's user avatar
  • 1,837
53 votes
2 answers

Numbering tables A1, A2, etc in Latex

I have main tables and appendix tables in my paper. I would like to number the appendix tables "A1", "A2", "A3", etc OR, at the very least, re-start the table numbering at 1 in the appendix. Any ...
user2472081's user avatar
53 votes
1 answer

Reset equation numbering after each section

I would like to reset equation numbering after each section or subsection. Right now I use \setcounter{equation}{0} I saw in another page you could also reset it by adding the following line to the ...
Isuru Daulagala's user avatar
52 votes
1 answer

How to split a latex document using parts and chapters

I'm trying to make a PDF document, using the book class, divided like this: Part: 1 Chapter 1 Chapter 2 Etc. Part: 2 Chapter 1 Chapter 2 Etc. How do I do this without the break in page ...
Simon's user avatar
  • 523
50 votes
9 answers

Automatically assign a number to every paragraph

I would like to add a marginal number (don't know the right term; in german „Randnummer“) to every paragraph of text I write. I don't see any other solution, than to write every single number manually ...
Thorsten's user avatar
  • 12.9k
48 votes
1 answer

How to number and cross-reference \subsubsection-level headers

I'm trying to cross-reference 2 subsubsections from my document. My structure is like: \chapter{something} \section{1.1} \subsection{1.1.2} \subsubsection{Number 1} \label{sssec:num1} \subsubsection{...
mhorgan's user avatar
  • 583

2 3 4 5