Questions tagged [pdflscape]
The pdflscape tag has no usage guidance.
69
questions
1
vote
1
answer
49
views
How to resume the page number at the footer after `pdflscape` if the next content are equations in LaTeX?
I knew how to resume the page number after the pdflscape at the footer if the content is the text as in the case.
But if the following content after the pdflscape are equations, the next page number ...
- 663
3
votes
1
answer
68
views
How to center a table wider than `\textwidth` in `pdflscape` in LaTeX?
I made a table wider than \textwidth in pdflscape in LaTeX, so I put it in a new geometry with \newgeometry. After the table, I restored the geometry with restoregeometry. But there is a blank before ...
- 663
0
votes
1
answer
108
views
How to center table and move header and footer with `tabularray` and `pdflscape`?
I know centring table with \begin{adjustwidth}{-1cm}{-1cm} and how to delete header and footer with \thispagestyle{empty}. But in tabularray and pdflscape environments, it seems not centered and can't ...
- 663
0
votes
1
answer
35
views
landscape Header on the long side
Page 2 is to be displayed in landscape format. How to place the header on the top long side on this page?
\documentclass[12pt,addpoints]{exam}
\usepackage[a4paper,left=2cm, right=2cm, top=3cm,bottom=...
- 49
0
votes
1
answer
22
views
How to omit the blank between the text and and the pdflscape?
I have wide table so I need to put the table in pdflscape environment. But, I found there are too much blank between the text and the pdflcape environment.
Is there a way to omit this blank?
\...
- 663
0
votes
1
answer
37
views
What is the most efficient way to alternate between portrait and landscape documents with small background images
I am designing worksheets for my math class and I want to have a school logo and class logo at the top corners of each document. My worksheets have lots of elements and I found that if I made the ...
- 43
0
votes
1
answer
61
views
How to rotate a long table in a two column article?
I'm trying to achieve something like the table of the following article:
https://www.sciencedirect.com/science/article/pii/S0168169917308803
It's a two columns Elsevier review with a few long tables ...
- 3
0
votes
0
answers
25
views
After one landscape page, I do not get a proper portrait (fullpage)
In my document (exam) I want one page in landscape - which works perfectly. Now, the following pages are reduced to a quadratic format (notice that page number is about 8cm too high). What can I do?
I ...
1
vote
1
answer
49
views
Start next landscape long table on the same page as where previous landscape long table midway ended
In the appendix of my thesis I have multiple consecutive landscape long tables. Quite a lot of them they end midway of the page. I would like to start the following table on the same page, instead of ...
- 13
0
votes
1
answer
65
views
Centering the page number in the rotated page
My issue is related to the common problem of rotating the page. I used the pdflscape package to rotate my page but the page number stayed the same. I used/found this block of code to create a new page ...
- 1
1
vote
1
answer
273
views
Full page figure in landscape alignment
I want to have more control over the placement of a figure in a landscape orientation. For some reason the usual options (t, b, etc.) have no effect in my document. Latex just places it at the bottom ...
- 27
1
vote
0
answers
39
views
Landscaping a page
I am trying to landscape a specific page of my document and used pdflscape package and landscape environment to do so. The page does turn into landscape mode, however, the texts are not (as shown in ...
- 25
0
votes
0
answers
31
views
Float positioning with pdflscape package [duplicate]
I'm using the pdflscape package to create a document with several sections that need to be in landscape. I am seeing strange behavior with figure floats.
I would like to use htp for figure positioning,...
- 125
0
votes
0
answers
101
views
Landscape page has different dimensions than portrait
My question is duplicate of this. How to produce landscape page the same size like a portrait one?
\documentclass[a4paper, 12pt]{article}
\usepackage{pdflscape}
\begin{document}
\begin{landscape}
...
- 71
0
votes
1
answer
57
views
Rotating Header and Caption of Imported PDF using pdfpages
I want the PDF to be landscape, but the caption and the header to be as they would be in portrait mode. Attached is an image of the current output that I have from the code. In addition, I have added ...
0
votes
0
answers
74
views
How to hold header and footer position in LaTeX when using pdflscape to convert to landscape format
I am using pdflscape to convert my document to landscape in LaTeX/RMarkdown. I have an issue whereby the content in my header and footer has rotated, and I would prefer to keep it in its original ...
- 111
1
vote
2
answers
97
views
portrait page with section title, and "landscaped longtable"
I have the following landscaped longtable under a section:
\documentclass{article}
\usepackage{longtable}
\usepackage{arydshln}
\usepackage{pdflscape}
\begin{document}
\section{Landscaped longtable ...
- 87
0
votes
0
answers
55
views
Floats/graphics’ margins in pdflscape with afterpage
I am currently working on a lengthy scrbook document that includes many graphics (images, music scores, etc.). At one particular side, I have a left (even) page full of text, then using \afterpageas a ...
- 169
1
vote
1
answer
225
views
Landscape on a Single Page by Rotating Counterclockwise
I'm looking for a solution to rotate pages in my PDF output in the opposite direction to what seems to be the standard for most packages. I have a header and footer on my page and for aesthetic ...
- 111
2
votes
2
answers
328
views
exam document class and pdflscape causing unwanted margin changes
I'm having problems with the margins when using the exam document class and the package pdflscape. When I insert a landscape page in the middle of my exam document, it drastically widens the bottom ...
- 23
0
votes
1
answer
219
views
Tikz complex flowchart with custom shapes
I'm trying to recreate the "flowchart" below using Tikz. I was able to create the various shapes., but I've run into several problems:
The page should be displayed in landscape, but the package ...
- 508
1
vote
1
answer
107
views
tufte-book: I can't display a figure in lanscape properly
I need to display a figure in landscape mode in a tufte-book latex document.
Yet, I cannot display it properly. It seems the margin is placed below. For e.g., try
\documentclass{tufte-book}
\...
- 311
2
votes
2
answers
802
views
\toprule is not spanning the width of the table
I am trying to create a landscape table that spans the vertical length of a page. The following is what I get:
The table almost looks good, except for the following:
The \toprule, \midrule and \...
- 331
0
votes
0
answers
40
views
Landscape oriented long tables with small margins
I want a long table to be landscape oriented with small margins (all margins). I need the page number to be at the bottom of the page.
\sidewaystable works fine for a short table and does what I ...
- 587
2
votes
1
answer
193
views
table caption and footnote not sideways when applying adjustbox
I have the following table, I want to make it a sideways table, however when I do so the table caption does not go sideways, also the table footnotes do not go "sideways".
That is, I am trying to get ...
- 459
0
votes
0
answers
580
views
how to keep page header/footer position under pdflscape
I want one page in the middle of my article(the No.2 page in this example) is in landscape style, and other pages in portrait. So the pagckage pdflscape is introduced. It's all right for the page and ...
- 2,355
1
vote
0
answers
269
views
Hyperref problem when using pdflscape
As shown in the .gif animation below, a click on the link below the table will move the visual focus to the position just above the linked cell in the table.
However, after the table is changed to ...
- 207
1
vote
1
answer
263
views
margins with landscape and page header
I use the scrreprt class with a page header. I also use margin notes. It looks good in portrait mode.
However, some pages may be rotate. In that case, this looks ugly.
Here is a MWE:
\...
- 2,689
0
votes
0
answers
359
views
There is an alternative for \afterpage?
I'm experiencing problems with my floats. Reading about it I found that \afterpage could be the responsible for that situation (answer that I read). I use \afterpage for long horizontal tables spread ...
- 2,693
2
votes
1
answer
347
views
How do I set the Rotate attribute for a landscape page of a pdf produced by xelatex?
I've adopted this answer to rotate a table and its caption. I do not want to rotate the header, the footer, the section title not the paragraph on the same page.
Now I want to change the Rotate ...
- 437
1
vote
1
answer
964
views
pgfgantt and pdflscape - gantt chart drops a month
I'm trying to produce a Gantt chart on a landscape page as part of a larger document. However, I when I compile the MWE below the last month unit (2020-06) seems to drop off the chart (image included ...
- 13
3
votes
1
answer
524
views
LaTeX: Landscape pdf numbers in the wrong place
I am trying to insert some pdf pages into my LaTeX document and have them numbered.
So far, I have the following tex file:
\documentclass[10pt]{article}
\usepackage[margin=1in]{geometry}
\...
- 31
2
votes
0
answers
186
views
Table margin, white space problem and position problem
Table margin problem, extra space is appear in the margin of table (see landscape table 3), also table position is wrongly appearing(I have place the second table in last but it appears as second also ...
- 299
2
votes
2
answers
429
views
Presumed incompatibility between pgfplots-TikZ and pdflscape: externalization fails on all images [duplicate]
I'm trying to figure out why the externalization of tikzpictures does not work any more (used to).
I have the following in the preamble:
\usepgfplotslibrary{external}
% \tikzexternalize[prefix=fig/...
- 6,593
4
votes
3
answers
556
views
Is pdflscape compatible with pdfx?
The following code triggers an error when using pdflscape.
\documentclass{letter}
\usepackage[a-1b]{pdfx}
%\usepackage{pdflscape} % breaks things
\begin{document}
Hello World
\begin{landscape}Hello ...
- 91
1
vote
0
answers
265
views
landscape rotating wrong page in
Consider the following MWE. I would like a large figure in my text to have a landscape orientation in the pdfviewer so I am using pdflscape. I found that I have to use the revtex4 option instead of ...
- 139
0
votes
2
answers
306
views
Appearing order in a landscape figure and normal figure
I'm working in a text with a lot of figures and some of them are landscape oriented. In the text I created a landscape figure, followed by some paragraphs and then a regular figure. I expected that ...
- 2,693
0
votes
0
answers
1k
views
landscape environment and margins on the same side
I have a long table (it is just text in the MWE) in a landscape environment with the pdflscape package. I want to set the top margin for all the pages in landscape mode.
So I import the geometry ...
- 525
3
votes
1
answer
1k
views
How to rotate the pdf page with a sidewaystable/figure without using pdflscape? [duplicate]
I have a sidewaysfigure, however I'd like to rotate the pdf page containing this table, avoiding the use of pdflscape package. How can I do this?
\documentclass[12pt,a4paper]{article}
\usepackage{...
- 2,693
1
vote
1
answer
192
views
Undesireable withe space between paragraphs after a landscape page
writing a document I founded that after a landscape page, LaTeX was leaving a big withe space between paragraphs after a subsection heading, especially when the paragraph had less than 3 lines. When ...
- 2,693
0
votes
1
answer
1k
views
Orient headers and footers depending on portrait or landscape pages in document
when I use landscape in my document for some pages, the headers and footers do not change with the orientation of the page.
I would like to know if it possible to get the headers and footers to ...
- 8,674
3
votes
1
answer
216
views
Undesirable vertical stretching of tikz figure inside animateinline on landscape page
Using the following MWE code:
\documentclass{article}
\usepackage{pdflscape,animate,tikz}
\usetikzlibrary{shapes.misc}
\begin{document}
\begin{landscape}
\begin{tikzpicture}
\node (rect) at (0,...
- 1,051
1
vote
0
answers
412
views
Temporarily switch to landscape layout
I've got two perfectly working stand-alone documents portrait.tex and landscape.tex. I would like to include landscape.tex somewhere in portrait.tex, ideally with minimal changes to landscape.tex. ...
- 108
1
vote
1
answer
592
views
Landscape figures in Classicthesis [closed]
On Ubuntu 16.04, the pdflscape and lscape package no longer rotate a page correctly when using a vanilla classicthesis package, but instead gives the error Output loop---100 consecutive cycles for ...
2
votes
1
answer
860
views
How to get rotated landscape page in LaTeX without flushing other floats?
I would like the landscape tables to appear rotated in the pdf using pdflscape package. However I would still like the text AND figures to float around the table.
As you can see in the portrait view ...
- 23
0
votes
0
answers
249
views
Last page not rotated when using longtable and (pdf)lscape
I have a very long table (multiple pages) in a paper that I'm writing, which contains +20 tables. The problem occurs when I use both landscape and longtable together - namely, the last page of the ...
- 131
4
votes
1
answer
546
views
LaTeX changebars with pdflscape
I have a very long document with a large number of tables in the appendices. These tables were a tad wide, so I change the page layout to landscape using the landscape command. To make it readable by ...
- 205
1
vote
1
answer
2k
views
What causes rotation of landscape page while lscape in use?
Pdf viewer rotates landscape while lscape in use in this far-from-minimal example.
Example bellow illustrates how PDF viewer rotates page that is rotated landscape page originally.
As was pointed ...
- 1,411
2
votes
1
answer
294
views
Viewer rotates landscape page using lscape
I am using lscape with pdflatex to set several pages to landscape mode for printed output. My viewer (evince) rotates the landscape page. It is convenient for reading, but is such a document still ...
- 1,411
1
vote
1
answer
437
views
Scrlayer-scrpage package + landscape environment creates overfull \hbox
Using the scrlayer-scrpage package with a landscape environment from the pdflscape package creates a pair of overfull \hbox badboxes.
Some users have commented that they do not receive the badbox.
...
- 1,258