Questions tagged [resize]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0 votes
1 answer
24 views

How to make \rightarrowtail and \twoheadrightarrow longer?

I am typing out short exact sequences and want to use \rightarrowtail and \twoheadrightarrow, but they have symbols above them so they need to be a lot longer, like \longrightarrow. Yet there does not ...
user avatar
0 votes
1 answer
103 views

How to fit a table to textheight by automatically adjusting arraystretch

I am preparing the academic calendar for my institution. It typically looks like the following: As you can see, I need to create 24 tables like this. I will create tabular to fit the data. Each table ...
user avatar
0 votes
1 answer
30 views

Can't reposition picture in template to top edge of page

I'm using this template to create a CV and I can't move the picture that's on the right to be as I want. I want to move the picture to be closer to the top edge of the page. I tried all possible ...
user avatar
0 votes
0 answers
30 views

Shrink font size of cell in longtable when text is bigger than cell width

I have a longtable with a fixed cell width and i need that when the text is bigger than the size of the cell it shrinks and not break line. \begin{longtable}{|p{0.15\textwidth}|p{0.15\textwidth}|p{0.4\...
user avatar
2 votes
3 answers
52 views

Fit minted environment to textwidth

I can't get minted environments to fit into linewidth: \documentclass{article} \usepackage[utf8]{inputenc} \usepackage{minted} \begin{document} \begin{listing} \begin{minted}{python} from foo import ...
user avatar
  • 123
0 votes
1 answer
65 views

How to place tables side-by-side by using "\minipage"?

I hope my final table to be like: | SUBTBL1 | SUBTBL2 | | SUBTBL3 | SUBTBL4 | and it is, but part of the table overlaps with the text, what should i do? Here is my preamble : \documentclass[...
user avatar
3 votes
3 answers
183 views

How can I resize a table and put them side by side?

I want to put 3 tables side by side but they are to big for me to use \quad, and I don't know how to resize it so it cant fit. Tried \quad, and trying to make the font smaller with \small before \...
user avatar
3 votes
2 answers
121 views

Fit equation with \cases in page width using \resizebox

I'm trying to fit an equation with several cases into my page width. The pain is that one case is awfully long. I used the \resizebox{} approach (see solution here), which would work, if there would ...
user avatar
  • 33
1 vote
1 answer
30 views

Is it possible to resize a block component for CircuitTikz in Latex?

I'm struggling to change the width/height of a directional coupler component provided by CircuiTikz package. Its code is given by: node [coupler2, rotate =90, scale = 1](d.c){}; which produces the ...
user avatar
2 votes
1 answer
35 views

Automatically scale text up as large as possible to fit within certain page count

Using relsize's \relscale{<scaling factor>}, is there a way to automatically set the scale so that text is as large as possible but producing a document no more than a specified number of pages?
user avatar
  • 2,012
1 vote
1 answer
65 views

How resize a long table? (scalebox doesn't work)

I am writing to you because I would like to resize a long rotated table but \scalebox command does not work. Here is an example of my input: \documentclass[a4paper,12pt,openright,oneside]{book} \...
user avatar
1 vote
3 answers
141 views

Beamer: resize regression table to vertically fit the frame

I'm using the beamer class to make presentations and my regression tables aren't fitting vertically in the frame. I've tried using \tiny before the tabular environment. Even then a part of table isn't ...
user avatar
  • 67
0 votes
0 answers
38 views

standalone package resize as in original document

I am trying to use Latex images on my website. For this I use the standalone package. The problem is that it generates too large images. The text on these is much larger than the normal text on my ...
user avatar
2 votes
1 answer
71 views

how to scale math in tex4ht?

I need to scale some math using tex4ht. I assume this will only work when compiling latex to HTML when telling tex4ht to use svg for math equations and not mathjax. ps. (if math can scale using ...
user avatar
  • 18.3k
0 votes
1 answer
136 views

Change boxplot size

As you can see in the image, the height of the boxplot in y-direction is unreasonably huge. How can I adjust that? Settings: \documentclass[final, english, ngerman, a4paper, 12pt, numbers=noenddot, cd=...
user avatar
1 vote
2 answers
130 views

How to Prevent \Sidewaystable from Beginning on a New Page

This post is an extension of the question posed in Rotating a Tabular Chart and a Nontabular Title to Fit the Page Consider the code: \documentclass{book} \textheight 9.75in \textwidth 5.75in \...
user avatar
0 votes
0 answers
256 views

How to change the width and the height of a table by using \adjustbox?

I built a table by using \tabularx in a \landscape environment. I want to resize this table by adjustbox. I used \adjustbox, it can resize the height but the width is still the same. I used this \...
user avatar
  • 260
0 votes
2 answers
58 views

Pie charts do not align with minipage

My goal is to display the two pie charts side by side at the same scale and to align them. It doesn't seem to be working for me and I'm not sure what the problem might be. Is it maybe the \resizebox{}{...
user avatar
0 votes
0 answers
44 views

TeX in EPUB file is shrunk on e-reader

Here is what my EPUB file looks like in Calibre: and here is what I see on my newly purchased e-reader: As you can see, the LaTeX in math environments is shrunk to an unreadably small size. I would ...
user avatar
1 vote
1 answer
126 views

\resizebox - Error: \begin{aligned} allowed only in math mode

This code snippet produces the error "\begin{aligned} allowed only in math mode. Missing $ inserted." \resizebox{\columnwidth}{!}{% $$\begin{aligned} \sin ^{2} \theta+\cos ^{2} \theta=1 &...
user avatar
  • 175
0 votes
2 answers
143 views

Adjusting icon size /tikz

How can I make these icons have identical size? https://www.overleaf.com/latex/templates/twenty-seconds-curriculum-vitae/kfgsngtymkfj The code that adds the rounded backgrounds is below. Can I modify ...
user avatar
  • 3
0 votes
1 answer
37 views

Avoid upsizing of images globally

When I use common options of \includegraphics like width, height, scale, etc. I would like the resulting size of the image never exceeds its natural size. In case of width, replacing it with the max ...
user avatar
  • 1,630
1 vote
2 answers
47 views

Two beside independent figures in multicol

Starting from comments to this answer to a similar question, I'm trying to fine tune the case of two beside no-floats figures with independent captions in a multicol document, working on the following ...
user avatar
  • 1,630
1 vote
1 answer
77 views

3 pgfplots plots, all in the same beamer frame

I have a beamer frame inside which I want to include a figure composed of 3 independent plots, like this: Please note that each one of these has completely different axis domain and unit vector ratio*...
user avatar
  • 200
2 votes
2 answers
178 views

Need to resize table and text to fit beamer frame

I'm trying to get this table of density measurements to display properly on this beamer frame. This is the best I've been able to achieve so far, but I can't get the text size to shrink so all of the ...
user avatar
0 votes
1 answer
78 views

Multiply constant to \widthof

I'm trying to compress some text using \resizebox. When I use an absolute value, it works fine \resizebox{2em}{\height}{AAAAA} when I use a partial of e.g. \textwidth it also works fine \resizebox{0....
user avatar
  • 140
0 votes
2 answers
562 views

Reducing size of Subfigure

I have four sub figures put together (two by two) but I would like to make the top two subfigures smaller. How do I go up about doing this? This is what my current code looks like (see below) and my ...
user avatar
2 votes
2 answers
57 views

How do I add a Picture (png) in its full size as an entire horizontal page in my otherwise A4 document?

I am currently working with Texmaker trying to add a png that is 2000x1800 px in size as an entire page into my document, which has an A4 format set. I do not want to have a margin on any pageside for ...
user avatar
0 votes
0 answers
64 views

Image only being made smaller by \includegraphics [scale...]

Working in rmarkdown. This is my YAML: output: pdf_document: latex_engine: xelatex I have one image that I would like to increase the size of as the font inside is small: \begin{figure}[h] \...
user avatar
1 vote
1 answer
123 views

Make a tcolorbox table, using tabularx, fit the \linewidth

I have a pretty formatted table with tcolorbox, which uses tabularx under the hood. But, I don't know how I would configure it, as is possible with tabularx, to make the table fit the linewidth - ...
user avatar
  • 177
0 votes
0 answers
52 views

Resize table columns evenly

I have the following table which looks like this: When the entry "aaaaa...aa" is shorter, it will look like this: I want in this case to keep the proportionality between the two columns, ...
user avatar
0 votes
2 answers
425 views

resize table to fit landscape page

I was unable to fit the 2 data tables needed for my thesis in portrait mode and hence have put it in landscape mode but it is going beyond the page length. I have seen other posts on many latex pages ...
user avatar
  • 169
0 votes
0 answers
26 views

Adjust tablenotes to rescaled table [duplicate]

I have a wide table (more than in the MWE if I start putting numbers in there) and use resizebox to fit it. However, in the threeparttable environment it does not let me put the footnotes inside the ...
user avatar
  • 289
1 vote
1 answer
217 views

tex4ebook: .svg images are correctly resized with \includegraphics but not with \includesvg

I'm generating an .epub with tex4ebook. Most of the graphics I want to include are svg. If I include them with \includesvg, and specify the graphics path with \svgpath, I can compile the document with ...
user avatar
  • 123
0 votes
3 answers
199 views

Automatic resize table

I have this output: Problem Instead of hardcoding the resize parameter '0.8' in \resizebox{0.8\columnwidth}{!}{[...]} - I would like to make some sort of automatic resize function. I have these two ...
user avatar
0 votes
0 answers
36 views

How to resize a large full page table to fit in the page?

I am working on a table to show the question-answer examples, The code looks like this: \documentclass[twocolumn]{article} \usepackage{booktabs} \usepackage{makecell} \usepackage{xcolor} \definecolor{...
user avatar
0 votes
1 answer
300 views

ResizeBox Tabular gives undefined control sequence

I am using a resizebox to fit a table into the page width, however it gives me a strange Error: Undefined control sequence. } at the end of the resizebox. I found that it may be related to the & ...
user avatar
  • 301
8 votes
4 answers
1k views

Inline chess symbols

I want to put chess symbols inline in my document. I know that, using skak, I can produce nice looking inline symbols with commands like \symking, etc. However, these are only white, and I need white ...
user avatar
  • 191
1 vote
1 answer
58 views

Setting tabular's width according to a certain number of characters

I have several pages with, for each one, one box inside containing some text. What's happening is that I resized each box according to his \linewitdh (but I think it\ should be a bit better actually ...
user avatar
  • 149
1 vote
0 answers
59 views

Rescale table height and center in beamer frame [closed]

So, I have been trying different options that were suggested in other posts to rescale the height of a way too long table to fit a frame. The scalebox option works for me, but afterwards the table is ...
user avatar
  • 289
1 vote
1 answer
69 views

Fit a table into margins

I have a table that I would like to make it fit automatically into the margins of my document. Currently I am doing this with the \resizebox command, but it changes the font size too. So, the question ...
user avatar
2 votes
3 answers
185 views

Conflict of resizebox and verbatim mode

I need to use resizebox over verbatim mode. Is there a conflict between usage of verb mode inside a resizebox? If you look at the first column of the table, it always add | at the end of each text. I ...
user avatar
  • 160
1 vote
1 answer
105 views

"Lowercase" numbers (CM Bright)

For my section headings, I like the look of using shorter numbers (they detract less from the section title), and get by with using the \smaller command. However, they are a smaller font size so ...
user avatar
1 vote
0 answers
265 views

Inserted tikz picture is too small

Problem I have created a network diagram that shows the behavior of hubs using tikz. When inserting the picture into the side margin of the kaobook class, the picture is way to small. I have tried ...
user avatar
0 votes
0 answers
73 views

Resizebox of Figure A kills Figure B with tikzexternalize in list and make mode

I get a very peculiar error when using tikzexternalize in the list and make mode. When I encapsulate a certain tikz-picture (Figure A) with resizebox another tikz Figure B picture fails to build with ...
user avatar
0 votes
1 answer
580 views

How to insert figure inside tcolorbox environment before the \begin{document}

In order to insert a logo picture in my sheet, I want to use the tcolorbox, but I don't know how to create a new environment to include it inside a node before the \begin{document}. Here's my code ...
user avatar
  • 397
3 votes
1 answer
155 views

Resize single character from certain font

I use Kerkis Sans greek font as a secondary font in my documents, for titles, paragraphs etc. As I've been testing the font I noticed that the capital greek F (Φ) is much smaller that the rest of the ...
user avatar
  • 1,379
1 vote
1 answer
123 views

Reduce size of a stargaze table in latex

I have a huge table, done with stargazer package in R, and I can not reduce its size, in order to fit my latex document. Everything has to be in a single page and I need all the information that is in ...
user avatar
2 votes
0 answers
41 views

Altering the size of math mode while using (incompatible) xymtex package

I have to use variable sized math mode and also use some chemical figures. For chemical figures, I usually use chemfig package. However in some case using xymtexpdf is easier. The problem is, resized ...
user avatar
  • 867
0 votes
0 answers
76 views

Problem resizing vector image: Font is also resized

I have created my graph as vector format (.eps) with 12pt title size with Python. However, when I import it in Latex and resize the image (such as [width = \textwidth]), as expected, everything gets ...
user avatar
  • 1