Questions tagged [resume]
{resume} is about an outdated documentclass `resume.cls` or `res.cls` in several versions out in the internet. Use {CV} to tag questions about Curriculum Vitae instead not using class `resume.cls` or `res.cls`.
170
questions
2
votes
0answers
48 views
+50
hyperref and bibentry problems in res class
Similar to this question: this, and this, but it did not help me.
I cannot compile references, the problem seems to be with bibentry, hyperref, and the bibliography files. The code results either in ...
4
votes
2answers
110 views
Resume - Anchor node to top left and other node below it
I am trying to build a resume using latex. I am trying to replicate some stuff done in MS word to latex.
Below is the image of what I am trying to replicate
So far I've used the following code
\...
1
vote
1answer
32 views
Improved automatic pre-section page break determination
I would like a particular section macro to automatically deploy a page-break directly above it, if and only if it would be placed too close to the bottom of a page. "Too close", here, means without ...
0
votes
0answers
151 views
How to decrease the font size of document class resume?
I need my resume to fit in one page, a small para is overflowing to the next page. The minimum font size I could achieve is 9pt. But I have seen people with more dense resumes with smaller fonts that ...
1
vote
1answer
31 views
Creating a buller point alignment with moderncv
I want to create a programming section that looks like something like this:
What I have so far is this:
\documentclass[11pt,a4paper,sans]{moderncv} % Font sizes: 10, 11, or 12; paper sizes: a4paper, ...
0
votes
1answer
136 views
`resume.cls` class template. How to move the headline (name, address, phone, mail)?
Please consider this resume template: https://da.overleaf.com/articles/rishi-shahs-resume/vgxvkmxktyxn. I want to keep this template but simply make two changes:
Move the headline (name, address, ...
1
vote
1answer
40 views
Control section horizontal spacing without squeezing
I'm writing a resume under the res.cls resume template. I have the following section to describe my experiences:
\documentclass[margin]{res}
% Default font is the helvetica postscript font
\...
1
vote
1answer
76 views
Decreasing vertical space before start of itemize in Resume.cls
I am using the resume.cls from this template: https://www.overleaf.com/articles/sharanya-anands-cv/fyvvdpdxthyc
I want to decrease the vertical spacing before the start of each list, but have ...
2
votes
1answer
64 views
Putting the links and email in left/right corners
How can I place the link in the left and the email in the right corner of the resume
LinkedIn : https://www.linkedin.com/in/abc-934894159/ email: XXX@gmail.com
I did this
\documentclass[margin]{...
0
votes
1answer
47 views
Preventing pagebreak within \newenvironment
I downloaded a latex template for a CV here https://www.latextemplates.com/template/medium-length-professional-cv
in the cls file it defines a newenvironment rSection that is then used for each ...
2
votes
1answer
44 views
How to add header in all pages except first on in `resume.cls` class
Please consider this resume template: https://da.overleaf.com/articles/rishi-shahs-resume/vgxvkmxktyxn.
My resume is more or less built this way but I have two pages. I want to add header to the ...
2
votes
0answers
163 views
Fitting resume content on one page [closed]
So I am new to latex and am pretty lost. Hoping one of you guys could help me out.
So I wrote my resume on latex and its almost 2 pages long. I am really tryna fit it all on one page.
So I tried ...
1
vote
1answer
110 views
Changing section font in a res document
I'm using res.cls to write a CV. I'd like to unbold the section title and use the italic font (as the picture below).
\documentclass[margin]{res}
\setlength{\textwidth}{5.1in} % set width of text ...
2
votes
1answer
95 views
I'm trying to add a headline below name in this template but can't figure out how to add it
How do I add the headline "Business Analyst, Data Analyst, Project Management, Information Systems" below the name?
\ProvidesClass{resume}[2010/07/10 v0.9 Resume class]
\LoadClass[11pt,letterpaper]{...
2
votes
1answer
74 views
Line on the same height on CV with multicols
I am trying to wrap up my CV but the problem I am facing is with two lines not being on the same level.
My code is below:
\begin{multicols}{2}{}
\begin{rSection}{|Computer Skills|}
\begin{itemize}
...
0
votes
1answer
59 views
Removing or changing table border spacing in `longtable`
I want to remove the border spacing of a table created by longtable package. I wish to preserve the column spacing as such and wish to only remove the right side border spacing so that a two column ...
0
votes
1answer
133 views
Editing res.cls to increase the left column width
I'm a beginner to Tex. I was using an Overleaf template to create a CV. [Link: https://www.overleaf.com/project/5cdbf1b52aab4345446ebf8c ]. I want to know how I can increase the left column width so ...
0
votes
0answers
61 views
Centering within a template
I am using DeCorte template for Resume https://ctan.org/pkg/res?lang=en.
I am trying to put some text in the center of the document by
\documentclass[margin, line]{res}
\begin{document}
\begin{...
1
vote
1answer
1k views
Having trouble using “rSection” or “rSubsection"
In a resume I wanted to write in LaTeX, I am getting a strange error when I use the rSection as below:
\documentclass{resume} % Use the custom resume.cls style
\usepackage[left=0.75in,top=0.6in,...
2
votes
2answers
701 views
Spacing before and after section at class resume.cls
I am using the resume template using class resume.cls and I want to change the spacing before and after sections. Right now the vertical distance between the heading and the section is too long. I ...
0
votes
1answer
287 views
How to add homepage to Latex resume
I am using this resume template.
There is no \homepage defined in the resume.cls file, does this mean I can't add a homepage address?
2
votes
1answer
74 views
Use customized color in \href
Problem
I am now updating my CV and I want to replace the ugly block outside the hyperlink with the customized color. I read and tried the solution provided in these answers and websites (anwser1, ...
1
vote
0answers
193 views
Error in output .cls and .tex files [closed]
Could not start the command
pdflatex -synctex=1 -interaction=nonstopmode %.tex
.cls file
2.! LaTeX Error: File `res.cls' not found.Type X to quit or to proceed,or enter new name. (...
0
votes
2answers
129 views
Help with formatting a predesigned resume template (changing the margins)
I have this resume template that I got from a friend who found it online on GitHub (I don't know where exactly): resume.cls and main.tex. I am very new to Latex so can someone help me align things so ...
1
vote
1answer
440 views
Adding single line below name in resume template
I am using the latex template found here: http://www.latextemplates.com/template/medium-length-professional-cv
Under the name, I would like to add a single line to convey address and other ...
2
votes
1answer
450 views
Etaremune with resume class
I am using the etaremune package with the resume class. They don't seem to cooperate in the sense that the numbering of the entries in etarumene is the same it is with enumerate.
Here the etaremune ...
2
votes
1answer
3k views
res document class cannot compile
Is the res document class for resume still working? I never had problems with res before. However, recently I was not able to compile my cv.
I have miktex on windows 10. Even for the below MWE, got "...
1
vote
1answer
368 views
`\moveleft` and `\centerline` in resume
I'm adjusting a resume template which is based on res.cls.
Here's the part that confuse me:
\moveleft.5\hoffset\centerline{\large\bf John Smith} % Your name at the top
\moveleft.5\hoffset\...
1
vote
1answer
3k views
In the resume document class, how to create a subsection without items?
I have a document in which I have subsections for which I might or not have items to enumerate:
\documentclass[10pt,a4paper]{resume} % Use the custom resume.cls style
\usepackage[left=0.4 in,top=0....
0
votes
0answers
346 views
How to make a bold line after section for Michael DeCorte res.cls
I am trying to update the following res.cls so that each section has a horizontal line after that:
% RESUME DOCUMENT STYLE -- Released 23 Nov 1989
% for LaTeX version 2.09
% Copyright (C) 1988,...
1
vote
0answers
505 views
Fancy header won't align left and isn't full width while using res.cls [closed]
I want to align my fancy header with my section headings, but can't currently. In pic1.png I'm trying to get Washington, DC to align to the left with the Experience section.
I am trying to same ...
1
vote
1answer
2k views
How to reduce space between name and address on a latex resume?
I'm writing a resume using Latex and I would like to reduce the space between the line \name and the line `address`. How to do so ?
Here is my code:
\documentclass{resume} % Use the custom resume.cls ...
1
vote
2answers
222 views
Unable to move element to right
I have the following file testCV.tex:
%testCV.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Medium Length Professional CV - RESUME CLASS FILE
%
% This template has been downloaded from:
% http://...
0
votes
1answer
577 views
resume template and small caps
UPDATE
My MWE is,
\documentclass{resume} % Use the custom resume.cls style
\usepackage[left=0.75in,top=0.6in,right=0.75in,bottom=0.6in]{geometry}
\usepackage{hyperref}
\usepackage[usenames,...
2
votes
0answers
470 views
Set custom margin for the res class
I am trying to make my resume using the res class.
the problem that I am facing is with the page borders. How I do I set in acc
Here is what My .tex file looks like
%-------------------------------...
18
votes
2answers
38k views
How to use BibTeX for putting a nice publication list in resume with document class (res.cls)
I am trying to put a publication list using BibTex into resume. But I do not know why it does not compile?. Here is my effort.
Following is the code that I want to use BibTex for its publication ...
1
vote
0answers
123 views
Compile - Problematics - Latex with TexShop [closed]
I don't know why I can't compile my Curriculum Vitae from LaTex. I would get something that looks like this website. Does anyone could help me at this level? You can even modify it to make it more ...
0
votes
1answer
69 views
Compile - Problematics - Latex
I don't know why I can't compile my Curriculum Vitae from LaTex. I would get something that looks like this website. Does anyone could help me at this level? You can even modify it to make it more ...
3
votes
1answer
567 views
Aligning address on the same line, in 3-column style
I have been using example res9a on this page. As you can see, the address is divided into three lines. I am new to LaTeX, so not sure if this is possible, but can those three lines be put in one line, ...
2
votes
1answer
707 views
CV Address with Photo alignment
I have a problem regarding to my resume alignment.
I want to show my address at top left of the CV and at top right show my photo. Here is a code snippet:
\begin{document}
\thispagestyle{empty} % ...
0
votes
1answer
645 views
Put image in title of CV
I am using the following template for my CV. I have filled this in as such:
\documentclass{resume} % Use the custom resume.cls style
\usepackage[left=0.75in,top=0.6in,right=0.75in,bottom=0.6in]{...
1
vote
2answers
1k views
Align address blocks in a resume
I'm trying to align three address blocks so that there is one on the left alignment, one on the right alignment and one in the center. This is what I have so far for two addresses (I used a lot of ...
1
vote
1answer
211 views
Space Issue in Resume
I have the address, portfolio website fields to the side of my name in the resume. Although I used the flushleft command for the table with contact information etc, they do not seem to appear beyond ...
3
votes
1answer
526 views
How to center image above name in LaTeX resume
I'm trying to center an image right above my name in my resume (i.e. the red line in the screenshot should go down the middle of the image), but it seems like the image is centered between the left ...
1
vote
1answer
553 views
Thicker hrulefill in res class
How do I make a thicker horizontal line using hrulefill in res class? I have the following in my preamble. Is it possible to modify it in some way to reflect the change?
\newcommand{\fullhrulefill}
{
...
1
vote
1answer
894 views
Footer cannot appear on CV using res.cls
I'm trying to add a footer into a CV using res.cls. I use some commands to define the footer but it still doesn't work. Anyone can help me? Thanks.
% LaTeX resume using res.cls
\documentclass[line, ...
1
vote
1answer
318 views
Misalignment between sections using res.cls class
I am making my Resume using the res.cls document class as found here. I have set the option margin in my \documentclass definition for the \section heads of my Resume to be to the left of the content. ...
0
votes
1answer
2k views
Reduce page margins using the res document class
In order to make my resume more dense and get more content on a page, I wanted to reduce page margins.
I had been struggling with this issue for a long time and couldn't find any good complete ...
1
vote
1answer
1k views
Change font size of the name parameter for res
I'm currently creating a resume using the res class. Is there a way for me to change the font size of the name parameter (which appears at the top of the page for me)? It's not quite like a section ...
0
votes
1answer
506 views
trying to get french accents in my resume
I wrote my resume in English, but now I need to translate it in French. I can't get the French accent to print properly. Here is a minimal example. It says:
"J'aime cet été" (I love this summer). You'...
