Questions tagged [revtex]

REVTeX (latest version 4.2) is a document class and a set of packages designed for the preparations of manuscripts to the journals of the American Physical Society (APS) and American Institute of Physics (AIP).

Filter by
Sorted by
Tagged with
0
votes
0answers
6 views

captionof spanning page in twocolumn formatting in revtex

I am writing an article for AIP using \documentclass[aip...]{revtex4-1}. I need to arrange a few JPEG files into one figure and the most convenient way is to use longtable* environment. However, I ...
8
votes
1answer
119 views

arXiv is not word-wrapping long bibliography entries the way Overleaf and my local installation do, for precisely the same Minimum Working Example

After extensive discussion with Barbara Beeton in the chat room, and later with David Carlisle in the same place, I was recommended by both to write my question here; it has just taken some hours to ...
0
votes
1answer
34 views

How can the traditional \epsilon be written in revtex?

RevTeX has chosen to use the \varepsilon symbol for both the \epsilon and the \varepsilon: http://www.physics.udel.edu/~bnikolic/teaching/phys660/PDF/revtex4.pdf (p. 25). Is there a way to re-...
0
votes
1answer
31 views

Why is a new “[filename]Notes.bib” file being created?

After fiddling with my tex installation for other reasons, now my bibliography is not working. The file "bibnotesMWE.tex", has the following code: \documentclass[12pt,showpacs,onecolumn,pra,...
0
votes
1answer
21 views

Line numbering problem with the AIP template

I am writing a paper based on the AIP template, and I want to add the line number. I tried with lineno, but it has some problems: as a standard (you can see that by opening the template in Overleaf), ...
1
vote
1answer
26 views

Affiliations appear in unspaced italics, possible math mode triggered by breqn package

I recently found out about the breqn package and have been using it profusely. However, I notice that my article's title section is thrown off by this package. Specifically, the affiliation part of my ...
0
votes
0answers
21 views

How do you italicize article titles in BibTex using RevTex4.2?

RevTex 4.2 by default displays journal article titles in the references, but it does not show them in italics. I could go through and italicize each title individually, but is there a way to set them ...
0
votes
0answers
47 views

Using the \cite command in RevTex 4.2 to list multiple papers in a single reference in the bibliography output

I am using Overleaf to write a paper for publication in an American Physical Society (APS) journal. I wish to use the \cite command in RevTex 4.2 to list multiple papers in a single reference in the ...
0
votes
0answers
15 views

Multiple bibliography with Revtex 4.2

Using Revtex 4.2, how can we write a main.tex such that the bibliography does not duplicate, when we include a paper and we include a supplementary information section? My current code is as follows: ...
0
votes
1answer
19 views

Showing a references section header using BibTeX and revtex4-1

I am using the revtex-4 document class. The bibliography command forms a references section, but there is no section title. Here is what it looks like: How can I add a "References" header underneath ...
0
votes
0answers
31 views

revtex4-1 Package babel error

The file used to run perfectly until few weeks ago. I don't remember editing the file. When I revisited the file today. I'm getting Package babel Error: You haven't defined the language en yet. I ...
0
votes
0answers
17 views

Todonotes appear directly over text in double column document (revtex 4.2)

Here's my MWE \documentclass[% reprint, amsmath,amssymb, aps, ]{revtex4-2} \setlength{\marginparwidth}{2cm} \usepackage{todonotes} \usepackage{blindtext} \begin{document} \title{Example Title} \...
1
vote
1answer
45 views

How to debug todonotes issues (expandafter {\@captype)

In a LaTeX document (using revtex-4.2 and todonotes) I run into issues with todo note related errors – which seem erratic and which I somehow cannot debug. The issue seems to be related to a certain ...
0
votes
1answer
54 views

How to capitalize appendix in ReVTeX?

I am using ReVTeX 4.2 for APS. \documentclass[% reprint, superscriptaddress, amsmath,amssymb, aps, ]{revtex4-2} When I use \appendix I get this \appendix \section{ blah } ...
4
votes
0answers
597 views

Class revtex4-2 Warning: Failed to recognize

When compiling a document with revtex4-2 class (and also with revtex4-1), I get the following warning: pdflatex> Class revtex4-2 Warning: Failed to recognize \@vspace, \@vspacer, \@no@pgbk, \@...
0
votes
1answer
31 views

Incomplete references in Revtex

I am using revtex4-2, with no particular bibliography style. But, I see that some of the references get listed with incomplete details. For instance, a bibtex entry @article{lorenz2007repeated, ...
3
votes
1answer
93 views

revtex4-2: cref reference format for label type `' undefined

I'm having issues getting cleveref to recognize references when using revtex4-2. When compiling, all references give a warning "LaTeX Warning: cref reference format for label type `' undefined on ...
0
votes
1answer
60 views

Issue with using \onecolumn with ReVTeX

I'm new to LaTeX and I'm trying to switch from double column to single column in a report I am working on. The single column is for the appendices. I've been trying to use the \onecolumn command, but ...
0
votes
0answers
35 views

revtex4-1 onecolumn: Remove the extra long blanks before/after eqnarray

In revtex4-1 onecolumn, I find the extra-long blanks (sentence breaks) before/after eqnarray, like this question: How to remove the extra long blanks before/after eqnarray? \documentclass[11pt, ...
0
votes
0answers
26 views

Revtex 4-2 and graphicx conflict: Margins change when graphicx is called

I was trying to set up a very minimal example to use revtex4-2. When importing the graphicx package, I have noticed a change in the page setup (you can notice a change in margins) and characters. It ...
1
vote
0answers
26 views

Change bibliography name to Supplementary References

I would like to call the references section Supplementary References. Currently, there is a line above the references with no section name. If I use the \def\bibsection{\section*{Supplementary ...
0
votes
1answer
26 views

REVTeX citations not superscripting with prb class option

In lieu of a MWE, my WE is this REVTeX template and sample. I would like to use the prb class option to get superscript citations. According to the template, When the prb class option is used, the ...
0
votes
0answers
43 views

Rotating a Long Table with RevTeX

I'm looking to rotate a rather large table in my document. The table is now large enough that it will span multiple pages. Previously, I was using sidewaystable to rotate it, as it was the only ...
0
votes
0answers
35 views

partial TOC using titletoc with revtex 4.2

I would like to make a TOC for the supplemental material that comes after the main body of a paper. I'm trying to use the titletoc package, but I am getting weird results that I don't understand. Here ...
2
votes
1answer
32 views

How to set even page numbers to left footer, and odd right in REVTeX?

I learned that fancyhdr package seems to do the job, so I tried \documentclass[aps,pra,twocolumn,superscriptaddress,notitlepage]{revtex4-1} ...... \usepackage{fancyhdr} \pagestyle{fancy} \fancyhf{} \...
-1
votes
3answers
113 views

Table looks ugly

I am trying to create a table, which has four columns, but somewhat what the table has ugly looking. \documentclass[% preprint, doublecolumn %superscriptaddress, %groupedaddress, %unsortedaddress, ...
0
votes
0answers
45 views

Vertical line not centered between columns using ruledtabular

How do I get the vertical line in the middle of the columns while using ruledtabular, not like this? \documentclass{revtex4-2} \begin{document} \begin{ruledtabular} \begin{tabular}{c|c} a &...
0
votes
2answers
146 views

Placement of figure in two columns text

I need to place a 1 column-width figure at the bottom of the first column, but if I use [b] like in the following code, the figure is placed at the bottom of the second column... \documentclass[% ...
1
vote
1answer
59 views

Unwanted equation numbering by section after appendix

There's probably a simple fix for this, but I need the equation numbering to not reset at each section after I call an appendix in revtex4-1. How can I do this? Here's a minimal (not?) working ...
1
vote
0answers
560 views

Can't compile aapmsamp.tex in revtex4-2

I am writing a manuscript to be submitted in Medical Physics Journal which uses revtex4-2 package. I already have a package med_phys_latex_template_NEW which is enough for preprint preparation but I ...
0
votes
0answers
19 views

Latex: references in the abstract

For Revtex: How to add a journal reference in the abstract of a paper without adding it in the bibliography.
2
votes
0answers
108 views

Title of article item does not show up with apsrev4-1 bibliography style

I am using a custom class for my document where I implemented the solution given here to show the title of article items within the apsrev4-1 bibliography style. However I am not succeeding with it. ...
2
votes
1answer
439 views

Revtex 4.2 caption error

\documentclass[amssymb,aps,twocolumn,pra,nobibnotes,secnumarabic,prc]{revtex4-2} \usepackage{tabularx} \usepackage[labelformat=simple,caption=false]{subcaption} \renewcommand\thesubfigure{(\alph{...
1
vote
0answers
74 views

REVTex 4.2 bibliography missing space after first author name

I've got a document in REVTex (based off the apssample.tex template) that is exhibiting some odd behavior in the bibliography: For papers with two authors, the space between the first author's last ...
0
votes
0answers
282 views

RevTex 4-2: Package babel Error: You haven't defined the language en yet

I am RevTex version 4-2 in combination with a Zotero-generated bib file. The bib file contains a lot of "random" entries in the "Language" field, such as "en", "eng", etc. These entries were ...
1
vote
1answer
452 views

Revtex multiple authors with no affiliations - how to put equal contribution as footnote?

I have a document with multiple authors. I normally add \affiliation{University Name} and \altaffiliation{These authors contributed equally to this work}. However, I now want to not display any ...
1
vote
2answers
403 views

multiple pages full-page-width table working with revtex

I am trying to figure out how to make a full page-width table, which continues over multiple pages in two column document. I got it working for the standard article, unfortunately the journal I want ...
0
votes
0answers
232 views

RevText and Overleaf - Could Not Recognise Document Class [duplicate]

I am using the RevTex 4.2 template from Overleaf, found here. https://www.overleaf.com/latex/templates/revtex-4-dot-2-template-and-sample/yydsrzvrqrzs When I try and do a Word Count, I get an error ...
1
vote
0answers
166 views

Multiple bibliographies in Revtex 4.1

I am trying to merge my paper with the supplementary information to be posted on Arxiv. Ideally, I would have two files, paper.tex and si.tex, each having its own bibliography. Then I would have a ...
2
votes
1answer
50 views

Why xetex failed to output hyperref bookmarks with revtex4-1 class?

With the following example using revtex4-1 class, XeLaTeX could not output PDF bookmarks featured by hyperref, but pdfLaTeX could. Removing the option reprint solves this problem, but the two-column ...
0
votes
0answers
60 views

biblatex-phys instead of revtex

I am writing a paper. Want to turn off ISSN in bibliography. Biblatex allows to turn off ISSN with one command if I am not wrong. Do journals like Physrev B actually accept papers with biblatex-phys ...
1
vote
1answer
373 views

Drawing centered QCircuit diagram in two-column Revtex 4-1 article

I'm having trouble centering a qcircuit diagram in latex. I'm using revtex4-1. I have tried the using \begin{figure*} ... \end{figure*} but instead of rendering the diagram in the center of the ...
1
vote
2answers
40 views

In revtex, how can I quote a integrated figure without sub-figure and make the generated hyperlink show as “Fig. 1(a)”?

How can I quote a integrated figure without sub-figure and make the generated hyperlink show as Fig. 1(a) in a RevTex documentclass, just like other published papers: My code is \documentclass[...
2
votes
1answer
116 views

Referencing to Subsection

I have document with sections and subsections. Problem is this one. When I use Sec. \ref{x} to reference subsection 1.1, of \label{x}, I get result Sec 1 1.1 Ho to get correct Sec 1.1 ? Coding ...
1
vote
1answer
84 views

How do I get the new REVTEX style for APS Journals?

The style for REVTEX 4-1 does not match the style of the journal, or it does not have a style for newer journals such as Physical Review X or Physical Review Applied. How do I get the right style?
0
votes
1answer
93 views

Revtex: how can I reproduce the author name(s) somewhere other than in the title block, such as the footer?

I am using revtex4-1 for formatting notes that may become part of background for a journal paper later. Although I like the format in general, I find that it's hard to re-use elements from the title ...
3
votes
1answer
1k views

Revtex 4.2 Bibliography not working

My tex file is running without any issue. But when I try to incorporate bibliography, the references are not getting generated. I've added the citation to bib file using JabRef and also defined the ...
1
vote
1answer
117 views

Shared affiliations for multiple authors with unique label in revtex

I would like to give a unique label to each author and affiliation in revtex, so to use them as I wish without repetitions. The article class offers the \affil command within the authblk package: \...
0
votes
1answer
393 views

Referencing an Appendix while using PRL style

I'm writing a file with two appendices but found that \ref{} isn't working; that is, Appendix~\ref{AppendixLabel} isn't outputting Appendix A - just Appendix. I soon figured out that this is because ...
0
votes
0answers
93 views

How do I remove a specific chapter from a table of contents? [duplicate]

My current layout looks like this: \documentclass[12pt, onecolumn]{revtex4} \tableofcontents \section*{Acknowledgements} \section{Chapter 1} \section{Chapter 2} \section{Chapter 3} \section{...

1
2 3 4 5
8