Questions tagged [revtex]

REVTeX (latest version 4.2) is a document class and a set of packages designed for the preparations of manuscripts to the journals of the American Physical Society (APS) and American Institute of Physics (AIP).

Filter by
Sorted by
Tagged with
0
votes
0answers
12 views

Miktex begin document error

I update the MikTeX distribution from 2.9 to 21.6. A simple file that was previously compiled without any problem: \documentclass[aps,preprint,nofootinbib,floatfix]{revtex4} \usepackage{epsfig} \...
0
votes
0answers
23 views

File `revtex4-2.cls' not found

I am having this problem while compiling the latex file that says: File `revtex4-2.cls' not found. ^^M where i'm using the command : \documentclass[aps, prl, twocolumn, amsmath, superscriptaddress,...
1
vote
0answers
22 views

Incompatibility between RevTeX, \include{}, and \label{}?

I have a large project that uses the RevTeX documentclass. Sections are incorporated using \include{}. The problem is that labels are not correctly resolved (Reference `xxx' on page 1 undefined). A ...
1
vote
0answers
29 views

MikTeX does not detect a package after both online and manual installation (revtex) [closed]

I am running MikTeX 2.9.7338 on Windows 10 and trying to compile a document using revtex4-2 in TeXworks 0.6.3. I followed these instructions and copied the revtex4-2 files in the appropriate TDS ...
0
votes
0answers
13 views

alternative to subcaption's phantomcaption compatible with revtex4-2

I have to work with revtex4-2. Unfortunately, it is not compatible with the subcaption package of which I would like to use the phantomcaption command. The phantomcaption allows me to reference ...
1
vote
1answer
17 views

Setting the bibliography RevteX along the text while keeping the number in sections

I have this code for my Latex, using revtex 4 : \documentclass[twocolumn]{revtex4} \usepackage[T1]{fontenc} \usepackage{blindtext} \begin{document} \section{Introduction} \blindtext \cite{REF} \...
0
votes
1answer
51 views

Single column footnote under \onecolumngrid in revtex4-1

I am using revtex4-1 with the argument twocolumn. In some part of the text I want to work under \onecolumngrid. However the footnote still appears in two-column format. How can I get a one-column ...
0
votes
0answers
29 views

Why is the section stopping mid-page and continuing on the next column?

I'm running into a problem where the text will abruptly stop on the first column mid-page and move over onto the second column. I am using the TeXWorks editor and the TeXlive distribution with REVTeX ...
0
votes
0answers
14 views

Trouble with making citations in revtex4-1

I'm writing my first scientific publication using the revtex4-1 package, but I'm having some trouble with figuring out how to correctly cite sources and set up the bibliography/references page. I get ...
0
votes
0answers
19 views

Using citation types that are defined in IEEEtran with a different citation style

Is it possible to manually add the additional BibTeX types (esp. "Electronic" citation type) that are defined in the IEEEtran bst file, without actually using that citation style? For ...
1
vote
2answers
25 views

RevTeX, problem with comma in the addresses

I'm using revtex 4.2 (with overleaf) and I'd like to writes commas in the adresses. For instance in : \documentclass[sor,jor,amsmath,amssymb,reprint,]{revtex4-2} \usepackage{graphicx} \usepackage{...
0
votes
0answers
39 views

Bibliography style natbib with revtex

How can I know which bibliography styles \bibliographystyle{} are available for natbib and a .bib file where I'm using RevTeX 4.2 (in overleaf) ? I'd like a bibliography style with numbers and ordered ...
0
votes
0answers
25 views

revtex4-1 changes the way authors are written with respect to revtex4

I was using revtex4 and the authors were written in the most natural way, that is you first write all the authors' names and then you list the affiliations with the proper numbering. Then, when I ...
4
votes
0answers
38 views

Footnotes written on the same line?

I have a long text with a lot of very short footnotes in it. There is an unfortunate amount of white space at the bottom of a lot of pages. How can I get the footnotes to write to the same line and ...
1
vote
1answer
16 views

How to change fontsize within a longtable using revtex4-2?

I would like to change the font size within a longtable using the revtex document class. Could you please help me how to reach this goal? It is not a problem if the solution requires modifications in ...
1
vote
0answers
24 views

How to put list of figures/tables after table of contents in revtex4-1

I'm writing my thesis and have written most of it using revtex4-1. When reviewing my notes, I realized I have to have both a list of figures (lof) and list of tables (lot). I'm still rather new to ...
3
votes
0answers
15 views

Unable to add punctuation without entering math mode in affiliation revtex4-2 [duplicate]

I'm am stumped. I have an article that starts with \documentclass[twocolumn,aps,prd,amsmath,showpacs,floatfix,reprint,eprint]{revtex4-2} % chktex 8 \bibliographystyle{apsrev4-2} % chktex 8 \...
3
votes
1answer
35 views

Making BibTeX print a newline in the .bbl file appropriately

BibTeX automatically restricts the generated .bbl file to have at most 80 characters in each line. This can have unintended consequences. For instance, I am using the apsrev4-1 bibliography style for ...
0
votes
1answer
283 views

Please update your system to include revtex4-1.cls

I am writing an article, references of which are to be written in AAS style. Now, when I added {aastex631} in the document class, it downloaded some class files. However, on compilation it showed the ...
1
vote
0answers
26 views

How to put a comma instead of “and” between the name of the authors in LaTeX with revtex4 [duplicate]

I'm facing some problem in my LaTeX code: \documentclass[twocolumn,pra,aps,showpacs,reprint,nofootinbib]{revtex4-1} \usepackage{amsmath,mathrsfs,amsbsy,color,graphicx,bm,amsthm,amsfonts} \usepackage{...
0
votes
0answers
17 views

Highlighting filenames in inline text (for revtex or latex)

I'm wondering if there are any recommendations or suggestions on how to properly highlight filenames written in the text, for example when mentioning source code files (frontend.py in the example ...
2
votes
1answer
26 views

Subequation numbering within enumerate environment

I work for a physics professor using revtex4 (just 4, not 4-1 or 4-2). I am using the amsmath package. I have been using \renewcommand{\thesection}{\arabic{section}} \numberwithin{equation}{section} \...
1
vote
0answers
20 views

Cross-referencing appendices in RevTex4.2

I am seeing everywhere that appendices should be numbered (or rather "lettered") automatically, and one should be able to reference them using simple label{} and \ref{}, which does not work ...
2
votes
1answer
91 views

Parskip doesn't work

In the following code, the comment parksip doesn't increase the spacing between paragraph and I don't understand why. How can I make a bigger spacing between my paragraph than the default one ? \...
1
vote
2answers
74 views

Footnote overwriting bottom centered page number

I am using the etoolbox package to set the footnote spacing to single spaced inside my double spaced document. However, if I have a lot of footnotes on a page, they overwrite the page number. How ...
0
votes
1answer
53 views

Set footnote single-space in double-space document

The title says it all. How do I set the footnote spacing to single-spaced? At the bottom of the picture, you can see that the spacing between the footnotes is slightly less than the spacing between ...
2
votes
1answer
120 views

Too much white space between figure and text

I am using REVTeX's APS format, so a two column document, and have not steered away from it too much. At the end of my document I have some text which just barely spills over the next page, perhaps a ...
1
vote
0answers
296 views

bibtex error using revtex

I receive an error in MikTex, using revtex. The error occurs when bibtex activates. Any ideas on a solution? Output is below: This is BibTeX, Version 0.99d (MiKTeX 2.9.6930 64-bit) The top-level ...
0
votes
1answer
58 views

How to use \affiliation in RevTex revtex4-2 Template in order to have the authors in the same line?

2 template (with two columns) and I would like to have the author of the paper in the same row and the affiliations all together below the authors. I'm using the following code: \documentclass[reprint,...
1
vote
1answer
63 views

Generate new .bib file from multiple .bib files (or .tex file?)

I am writing an article using RevTex4-2, where I reference from 10 individual .bib files (separated by topic). This works beautifully. However, I would like to extract only the references I need from ...
0
votes
0answers
61 views

How to number sections in the supplemental material (PRL style)

I'm preparing a paper to be submitted to the journal Physical Review Letters (required to use revtex4.1), which includes a main text and a supplemental material. Because I want to reference equations ...
0
votes
0answers
52 views

Conflict revtex and lineno with subfig

There seems to be conflict between the revtex class and the subfig package in the presence of lineno. Compilation is successful without the linenumbers call. It also works if the subfloats are ...
3
votes
1answer
557 views

revtex4-2.cls error with an older TeX distribution

I am using the revtex4-2 class file for the first time to compile my .tex file. However, I am getting the following compilation error: ! Undefined control sequence. <argument> \AddToHook ...
0
votes
0answers
60 views

How to get rid of hideous spacing before the year in the pub list of my CV?

Each entry in the Publications sections looks fine until the separation between title and year, when I get this eyeball-gougingly ugly three-space separation between publication title and year; e.g., ...
0
votes
0answers
141 views

Using revtex4-2 with the biblatex package

I am struggling with LaTeX on Overleaf. I am trying to produce a bibliography and I can, however, only if I select the article class. If I switch to RevTex4-1, it still produces the output I want, but ...
1
vote
0answers
466 views

revtex4.2 on miktex breaks (Missing \begin{document})

TeX experts. Below is a MWE of an error I see during compilation, which I think is associated with revtex: \documentclass{revtex4-2} \pdfoutput=1 \begin{document} \title{the title} \author{the ...
1
vote
0answers
101 views

How does revtex4's \@author variable work?

I am having a tinker in the internals of REVTeX (and more specifically its component ltxfront package), with the goal of writing a package to handle author ORCID iDs, and I would like to understand ...
2
votes
1answer
3k views

revtex4-1.cls not found in miktex2.9 in Windows 7

I have installed Miktex latest version today in a newly formatted Windows 7. Then tried to run a .tex file in Texstudio. That file starts with: \documentclass[12pt,preprint,superscriptaddress,floatfix,...
1
vote
1answer
77 views

Warning in REVTeX 4.2 for references to an external document: “… has been referenced but does not exist, replaced by a fixed one”

First, I build the following external document, ExternalDoc.tex file, 3+ times. \documentclass[prl,aps,10pt]{revtex4-2} \usepackage{amsthm} \theoremstyle{definition} \newtheorem{thm}{Theorem} \...
0
votes
0answers
83 views

Bug Reporting: After updating MikTex from 20.6.29 to 20.11 Physical Review Letters template became broken

After updating to 20.11 pdflatex, called from TexStudio, exits with error ! Extra \endgroup. ! LaTeX Error: Missing \begin{document}. Version 20.6.29 works fine. Both version was tested on Win7 and ...
0
votes
0answers
22 views

Column not aligned on the bottom in a paper

I am writing my first paper in overleaf, however I have one problem with the layout. If in one page I have a section title on le left column and then only text (both in the left and right columns) I ...
0
votes
1answer
26 views

Remove left margin from a single {turnpage} page in RevTex class

I have a large plot that I put on a {turnpage} page in a mainly portrait document using RevTex4. As shown in the attached figure below, I was able to \hspace*{-2cm} after the rotating command to move ...
2
votes
1answer
43 views

Revtex 4.2 clash with fancyhdr package

Hello this is my first post so sorry if i am not clear enough somewhere. I have been trying to write my lab report using Revtex 4.2. I also used the fancyhdr package to generate a headline with some ...
0
votes
0answers
22 views

revtex title after bibliography

Using revtex with two columns, I would like to have an extra text after the bibliography, formatted as follows: start a new page after the bibliography insert a single column text (sort of title) ...
2
votes
1answer
41 views

Remove borders in hyperlink with revtex

I need to use the revtex4-1 class for my article, and it seems the hyperref package is not working properly with this class. Most of my citations contain a doi field, but no url field. I want to make ...
0
votes
0answers
2k views

Problems installing revtex - 'revtex4-2.cls not found'

I am using TeX Maker with texlife on Windows 10 and I want to install the revtex package (as I want to use the APS style in LaTeX). I followed the description here and downloaded the corresponding zip ...
0
votes
0answers
29 views

Preamble performing similar to revtex typesetting

I use python matplotlib package for creation of figures and I can indicate prefferable latex preamble for compilation of text (e.g. axes labels). Although I cannot use revtex class itself (\...
0
votes
0answers
22 views

One-column footnote within revtex package

I use revtex-4-1 package and have the following code: \documentclass[aps, twocolumn, nofootinbib, superscriptaddress, floatfix]{revtex4-1} \newcommand{\myparagraph}[1]{\par\bigskip\noindent\textbf{#1}}...
1
vote
0answers
19 views

APS reference style without revtex [duplicate]

I am wondering if there is a way to use the APS reference style in a latex article that does not use the revtex article class? Here is a compilable example: \documentclass[a4paper,11pt]{article} %...
1
vote
1answer
36 views

First page number is not appearing

The first page number is not appearing however the subsequent page numbers are. It is just the first page number that doesn't appear and I am not sure why. \documentclass[twocolumn,prb,amsmath,amssymb,...

1
2 3 4 5
9