Questions tagged [roman]

Roman fonts are either those fonts that have serifs or any fonts that are not italic or oblique. This tag covers both uses.

0
votes
0answers
15 views

Section roman and section cross-reference arabic

Dears, I want to change just the section cross-reference from roman to Arabic numbers in a paper using the IEEE template. An MWE of my problem is \documentclass[journal]{IEEEtran} \begin{document} ...
3
votes
1answer
30 views

Alignment of Roman enumeration list

I am trying to create Roman enumerating list. I am using package: \usepackage{enumerate} Here is my code: \begin{enumerate}[label=\Roman*] \item \textbf{\textit{First}} \item \textbf{\textit{...
0
votes
0answers
58 views

mathtools + unicode-math + DeclareMathOperator + mathrm + glossaries-extra + xelatex +makeindex = “Undefined control sequence”

Running xelatex file && makeindex -s file.ist -t file.nlg -o file.not file.ntn && xelatex file on file.tex containing \documentclass{article} \usepackage{mathtools} \usepackage{...
1
vote
1answer
37 views

In frontmatter after toc suddenly pagenumbering gets arabic

I can't find why the page-numbering after a chapter (or even toc) in front-matter switches to arabic. I would appreciate any helps and hints to fix this. Here is my (edited) code: \documentclass[ ...
2
votes
2answers
105 views

Numbering Question Help Me!

I don't know if my explanation is correct, but I'd like to make the following documents This is about numbering. I'm trying it myself, but... I think this is too difficult for me. Can you tell me how ...
1
vote
0answers
38 views

Roman to Arabic Listing Caption Numbering [closed]

I'm working on my thesis that uses many code listing in it. In each listing, I want to put caption with the chapter number followed by the position of that listing on that chapter. The problem is my ...
6
votes
4answers
395 views

How to typeset chemical formulas in roman? [duplicate]

I'm new to LaTeX and have a desire to learn as I'm completing a PhD and have been told LaTeX is a great platform for writing scientific documents. So, I have written a short plain English piece in ...
0
votes
1answer
35 views

How to set roman font to make references to R? [duplicate]

I'm writing a thesis and I need to make references to R. I've read some other articles that cite "R" and they seem to use the roman font. I have no idea how to set this font :(
2
votes
1answer
83 views

Continue previous page numbering (Roman/Arabic) with two independent counters?

Assumed I want to write a document with abstract, acknowledgements, three chapters, two appendices and a statutory declaration. Hereby... Abstract and acknowledgement should be numbered in Roman ...
1
vote
1answer
127 views

roman page numbers problems OT2

I have a problem. I am writing a book in Cyrillic, but the numbers of pages are marked in roman letters also written in Cyrillic. How can they be written in Latin only? Instead of i, ii, iii,.. writes ...
2
votes
1answer
66 views

Problems with using \pagenumbering{roman} in combination with the microtype package and labeling of sections / chapters

I am using the scrreprt document class for writing a report for a study course at my university. While writing the appendix I recognized that there seems to be an error caused by the microtype package ...
0
votes
2answers
146 views

Sections, subsections numbering

I want to have the following sections numbering style: I. Section A. Subsection SubSubsection The following lines of code present different style: \renewcommand{\thesection}{\...
1
vote
1answer
346 views

Beamer - Total frame number in roman

I am trying to get roman numbers for beamer footline. I tried the following code: \documentclass[•]{beamer} \renewcommand{\insertframenumber}{\roman{framenumber}} \renewcommand{\...
0
votes
0answers
38 views

Need single command which enforces roman in text and math environments

I am currently using an \rm command as a user-specified base typeface in software that writes output to .tex files. However, I noticed that if \rm gets placed in an equation, you don't get math ...
0
votes
0answers
63 views

roman numerals with polyglossia

In the short example below I have an issue with incorrect writing the roman numerals (in frontmatter page numbering and in the plain text). Both issues come from using the polyglossia and setting the ...
2
votes
1answer
340 views

Roman numerals footnotes only in title page

I am trying to use roman numerals for the footnote only in the title page using \renewcommand{\thefootnote}{\Roman{footnote}}. I have also tried by using minipage, but it seems it simply does not work ...
2
votes
2answers
631 views

Redefine ^ to produce roman superscripts and subscripts

I need to set subscripts and superscripts automatically in mathematical equations in roman font style for a book publication. I do not want to apply \mathrm{...} to each subscript or superscript ...
9
votes
2answers
218 views

Upright punctuation independent from font style

Is there any way to make all the punctuation (comma, period, colon, semicolon, etc.) in roman even if the current active style is italic? I am using mathtime package and fonts for my setup and the ...
2
votes
1answer
97 views

Unusual versions of 3 letters [closed]

I'm trying to type up notes on a lecture I attended in which three capital letters (F, M, V) were clearly some very specific implementation in which none of them contain curved edges. I can't find any ...
4
votes
2answers
286 views

Roman enumerate inside an align* environment

I'm new to latex and i'm writing my first document. I want to specify the conditions for a theorem to be true and i want to format it like this: Centered tuple at the top. List of items with roman ...
6
votes
1answer
1k views

What does \renewcommand*{\rmdefault}{fxlj} exactly do?

I'm writing a document with multiple hundred of pages and noticed some glitches with the selected font I use. I'm using a template provided by the institute I'm working at. The font I have chosen is ...
1
vote
1answer
207 views

Roman Numerals in ToC : Error in \settowidth

I have a document in which I was trying to replace the arabic numerals of the chapters by Roman Numerals in the TOC. i.e Instead of Chapter 1 First chapter Chapter 2 Second Chapter I wanted ...
0
votes
0answers
78 views

Screen Fonts -> Roman Font is Affecting math-mode's Font Suddenly!

everybody. I changed my LyX default Roman screen font to the David font. My text looks like this, with David as font for Roman: In terms of the font for regular (non-math-mode text), the text has ...
1
vote
3answers
456 views

add some more in table of contents

i want to add the contents eg Abstract in table of contents which should have a roman letter to it.. i have shown below
0
votes
0answers
135 views

Formatting chapter and table of contents

I would like the Chapter heading to be in Roman.I have done this , but this leads to table of contents also containing mix of roman and arabic. I want the table of contents to be in default format ....
4
votes
1answer
145 views

I need page-numbering odd-roman

I'm trying to number the pages with only odd number. how to change the count from (1,2,3,4,5) to (1,3,5,7,9) in latex?
1
vote
1answer
267 views

Awful ToC layout, while using roman number

I use the article class. I want a ToC and pages with roman number, so I use the following : \renewcommand{\thesection}{\Roman{section}} But the ToC layout is horrible (while page title are great) :...
1
vote
1answer
586 views

Roman numbering of pages on ToC, but arabic on document

this could seem a little awkward, but apparently I need to do it this way. I have a document (class book) that uses arabic page numbering starting from the introduction page. Before that I have the \...
3
votes
1answer
108 views

Problem with babel + Greek and endnote package

I am typesetting a document which includes both French text (the main language) and some Greek. It's a kind of scholarly work and I would like to have both footnotes and endnotes. I would like to use ...
5
votes
2answers
843 views

How to make all roman capital letters as mathroman inside math environments

I would like that all capital (uppercase) roman letters inside math envirorments become as mathroman. I mean for example to get $\mathrm{K}$when writing $K$.
9
votes
1answer
896 views

Different page labels/numbering in PDF viewer

I am using the report class and would like to have front matter with a different numbering than the main matter. So I use Roman numbering at first and then Arabic numbering later on, but what I would ...
2
votes
2answers
377 views

Forcing algorithm2e to typeset using Times New Roman

I am writing a book using a sans serif font, and I have a need for typesetting pseudocode. The pseudocode, however, is typeset with sans serif font as well, yet I need the Times New Roman for that ...
1
vote
1answer
615 views

CMR Font selection and fancy header formatting?

I am trying to accomplish the following: Chapters like "Chapter1" in CMCSC10 font between two thin lines After that Chapter name like "Introduction" in CMR17 font The paragraph body in CMR12 font I ...
2
votes
2answers
350 views

Make a summary with a mix of roman and arabic numbers

I'd like to make a table of contents that uses roman numbers for the few pages before said table, and traditional arabic numbers for any pages that follow. Kinda like shown in here: I already have ...
3
votes
1answer
771 views

Change number after chapter in table of contents

From Chapter Roman in tableofcontents , it has an effect on Theorem, Definition etc. I would like to change number of chapter into Roman number in tableofcontents like CHAPTER I in picture. \...
8
votes
3answers
2k views

Sans-serif partial derivative symbol?

How can I typeset a partial derivative symbol (∂) in an upright, sans-serif font? I am using pdfLaTeX. I know this problem could be solved easily by switching to another engine — and feel free to ...
3
votes
2answers
844 views

Chapter Roman in tableofcontents

I try to change number of chapter to CHAPTER I,II,III in contents and it is done. \documentclass{report} \usepackage{tocloft} \addtocontents{toc}{~\hfill{\small Page}\par} \AtBeginDocument{% \...
5
votes
1answer
746 views

Choosing sans-serif font, without changing anything else

How do I make Arev the font for the sans-serif family, but nothing else? I tried using \usepackage{arev} \usepackage[T1]{fontenc} as instructed on this page, but that made everything sans-serif. I ...
16
votes
2answers
3k views

Consistent macro for bold upright vectors in both latin and greek

I’m using pdfLaTeX, and I want all vectors I typeset to be in bold, upright font. Unfortunately, based on whether the symbol is latin, lowercase greek, or uppercase greek, there are different commands ...
4
votes
3answers
1k views

Bold Roman expressions in Math Mode, with proper spacing

I have some math formulas where I need bold roman style for some math expressions. Since they appear quite often, I need a macro for them. The obvious way is to write \newcommand{\foo}[1]{\mathbf{#1}...
1
vote
1answer
3k views

What is the difference between normal text and Roman/upright?

What is the LaTeX command to have Roman/upright characters?
22
votes
2answers
19k views

Equivalent of \mathup for upright text in math mode?

To insert text in mathmode, there are a couple of commands: \mathrm for Roman script, \mathbf for bold weight, \mathit for italic shape, \mathsf for the sans serif variant, and so on. Now, sometimes ...
3
votes
3answers
3k views

Bold Times New Roman

I'm using Times New Roman in my thesis. But bold mode doesn't work. Here is code: \documentclass[a4paper,14pt]{extarticle}[2013/05/05] \renewcommand{\rmdefault}{ftm} \begin{document} \textbf{SOME ...
12
votes
1answer
3k views

How to make page numbering with ligature roman style?

I use roman page number for front matter, I was just wondering, is it possible to make these roman numbers as ligature? See. Roman: and roman:
5
votes
1answer
2k views

MikTex 2.9 64-bit not loading sans serif font for moderncv

I just got a new computer and installed MikTex 2.9 for Windows7 64-bit. When I compiled my resume for the first time (moderncv, theme casual), it compiled in roman vs. sans serif fonts. I did not ...
65
votes
3answers
19k views

Difference between various methods for producing text in math mode

What is the difference between \text, \textrm, \textnormal, and \mbox (and possibly other commands commonly used to produce text in math mode)? Various (La)TeX tutorials teach different methods, and ...
29
votes
1answer
19k views

How do I set the default beamer font to Computer Modern serif?

The default beamer font seems to be Computer Modern sans serif. How do I change this to serif? Note: \setbeamerfont{<element>}{family=\rm} seems to work for specific elements such as title, but ...
22
votes
2answers
17k views

Force upright Greek letters with isomath

The isomath package makes it possible to typeset upright Greek letters via \mathrm and \mathbf. Is it it possible to force all Greek letters to be typeset upright unless specified otherwise, e.g. to ...
9
votes
6answers
8k views

Use \mathrm by default

How can I get roman font by default in math mode?
19
votes
8answers
23k views

When to use serif and when to use sans serif font family

This is not a technical question. However as the FAQs say this place is about people who love to create well-structured and beautifully typeset documents I take my shot. I am often confused when ...