Questions tagged [rotating]
{rotating} is for general questions about rotating document elements as well as for questions about the `rotating` package and its `sidewaysfigure` and `sidewaystable` (floating) environments. For general {rotating} questions add other tags specifying what should be rotated.
725
questions
0
votes
1answer
18 views
Rotating the entire page at which a large table exists
I am trying to typeset a table with very long paragraphs. Due to the nature of the work, the table must not be divided into smaller ones. I want the following to be satisfied
The page on which the ...
2
votes
1answer
41 views
Mirror image of a diacritic mark
I want to have a mirror image of a diacritic mark. If I use reflectbox or scalebox the diacritic doesn't attach to the preceding character. I want it to be attached, but in inverse direction.
\...
1
vote
2answers
36 views
Adding text outside of actual table
I'm using this code and desperately trying to add text at the outside left saying "actual" and one at the bottom center saying "predicted".
\begin{table}[h]
\centering
\begin{tabular}{|p{.4\textwidth}...
0
votes
0answers
20 views
Figures are rotating in both direction with sidewaysfigure option
In my thesis, I want few figures to occupy the whole page in landscape. I am using sidewaysfigure option as follows.
\begin{sidewaysfigure}
\centering
\includegraphics[width=\textwidth, ...
1
vote
1answer
37 views
Rotating graph with tikz without rotating labels
I'm trying to rotate a drawing of K4 so that it forms a square instead of a diamond. I'm using the scope environment, but when I put transform shape as an option, I find the labels rotate as well. ...
0
votes
1answer
23 views
how to center rotatetext parbox?
the code below puts the text MNIST not at center. I want to center it align it with the text SSIM. I change parbox to different values of cm but nothing change. How ?
\begin{figure}[t]
\...
0
votes
1answer
29 views
Rotated table overlapping with page header
I have a problem similar to:
Problem between Sidewaystable and page header
I want to insert some blank space above the vbox such that the table isn't overlapping with the page header.
Due to GDPR I ...
4
votes
1answer
44 views
TikZ: rotating scope changes the shading, but not how you'd expect
It is my understanding that the shading in the following code is applied after the scope transformation.
\documentclass[varwidth,margin=0.5cm]{standalone}
\usepackage{tikz}
\begin{document}
\...
5
votes
2answers
62 views
TikZ: rotating scope changes shading
As a follow-up to this question, Saturn has a tilt of 26°. But when I tilt Saturn, the colors of the rings change.
\documentclass{article}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
\...
0
votes
0answers
27 views
wallpaper rotation with xelatex
I am using the wallpaper package in a tex template to generate pdfs with pandoc.
The tex template is:
\documentclass[12pt]{article}
\usepackage{lmodern}
\usepackage{amssymb,amsmath}
\usepackage{...
1
vote
1answer
35 views
How to vertically center the text contained in merged table cells?
I've been struggling with a table for a while now, where I have three columns with some merged cells and I'd like to be able to center the text vertically (in columns 3 to 5) and make better usagee of ...
2
votes
1answer
50 views
tcolorbox: Rotated text at the frame border
I am trying to put text at the left border of a box. Right now I have this:
\newtcolorbox{reminderbox}[1]{enhanced,
before skip=2mm,after skip=3mm,
boxrule=0.4pt,left=5mm,right=2mm,top=1mm,bottom=1mm,...
1
vote
1answer
34 views
rotate table and centralize it on page using abntex2
On my work, I have a table that I need it to be rotated. I already did it, however it stays in the end of the page. Is there a better way to rotate and centralize it; or just centralize it?
I used \...
1
vote
0answers
42 views
How to rotate list of figures in LaTeX? [closed]
As above, how can I rotate list of figures in LaTeX? I've tried to use rotating package, but it doesn't work for me.
\documentclass{article}
\usepackage{rotating}
\begin{document}
\begin{rotate}{...
0
votes
0answers
41 views
incorrect representation using tikzpicture
I have the following problem. If I compile the following code I get the following output
\documentclass[tikz,border=3mm]{standalone}
\usetikzlibrary{perspective,arrows.meta,bending,3d}
\begin{...
1
vote
1answer
86 views
draw rotation axis in triangular prism
How can I draw a vertical and horizontal rotation axis for a triangular prism? One approach looks as follows
\begin{tikzpicture}[scale=0.5]
\draw (0,0) -- (2,-2) -- (3.5,0);
\draw (0,4) -- (2,2) -- ...
2
votes
2answers
47 views
Reducing the line spacing for a rotated table cell
I'm trying to reduce the line spacing for the rotated table cells in order to reduce the width of the table and to make it look nicer.
Also the cell "Material" looks kind of crammed.
This is what it ...
1
vote
0answers
17 views
How to get vertical line on right-hand side using rotated columns?
I'm making a large table using solution from Rotated column titles in tabular user Martin Scharrer.
However, this solution seems to prevent any right-hand vertical line from showing up in the header.
...
0
votes
0answers
17 views
Some problems rotating single pages
Good afternoon,
I need to rotate just a few pages of a document I am writing and I firstly experimented this problem: \usepackage{lscape} did not rotate the page at all but the content inside it. ...
0
votes
0answers
28 views
How to reference a sidewaysfigure?
\begin{sidewaysfigure}
\caption{caption}
\label{figure1}
\centering
\includegraphics[width= 1.0\textwidth]{gfx/graphic}
\end{sidewaysfigure}
A sidewaysfigure created like in the code above can't get ...
0
votes
0answers
34 views
How can I fit this table sideways on the page (rotated 90°)?
\documentclass[a4paper, 12pt, twppages]{article}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{adjustbox}
\usepackage{graphicx}
\begin{table}[ht]
\centering
\caption{Results - ...
0
votes
0answers
27 views
How to properly subdivide Page into two areas with different geometry?
The document i'm trying to create has two pages. The first one should be divided into two areas, the first area should reach from the middle of the page to it's borders - no margins whatsoever. The ...
1
vote
2answers
57 views
Rotated multi-column header in booktabs
I want to gernerate a cross table with booktabs. Therfore, I have 2 data sets I want to compare to each other.
The table should look like the pic below but I do not get it to write the vertical ...
0
votes
2answers
30 views
How can I vertically stretch this table to prevent line breaks in rotated text?
I've got as far as this with a table but it's obviously rather ugly as it is, especially the word "Predicted" being broken in half.
I want to "pad" the inner cells in some manner so as to allow the ...
0
votes
1answer
37 views
Cell size with multirow and rotated content
I have the problem, that the cell size on my rotated multirow cells does not adapt its size, so that the contents fit. I tried following the
solution described in Long text in rotated multirow , but ...
2
votes
1answer
122 views
Option clash for package rotating
I am using this thesis template and sidewaystable environments provided by the rotating package. However, I have a two-sided document, and I have two sidewaystable environments, one on each page, ...
2
votes
2answers
70 views
Top-Align Rotated Text in Cells
I have cells in a tabular environment that have the text rotate 90 degrees. I am unclear as to how to have the text be 'top' aligned, i.e., right justified given the rotate text. Below is what is ...
4
votes
1answer
87 views
Fix rotation orientation using sidewaystable
I am trying to rotate two tables using sidewaystable but one of them was rotated clockwise while the other was rotated counterclockwise. Both of them use the same code, only the cell values are ...
0
votes
1answer
21 views
How to insert an image and a table together in one page in landscape mode?
I would like to insert an image and a table in landscape within a chapter in report class. Here is a sample code that I have used:
\begin{landscape}
\input{./Ch3/Tables/t01_innov_eq.tex}
\begin{...
0
votes
0answers
33 views
numbering parenthesis in lstlisting mode
I am typesetting LISP/Scheme code in latex using the lstlisting package. I would like each opening and closing parentehsis to be be numbered, starting with 1 (and for a balanced sexpr, also ending in ...
0
votes
1answer
39 views
how to rotate all the tables created by sidewaytables to the same direction
I have four tables created in sidewaystable, but it looks like they are randomly rotated meaning that while one table head is on the left, the other table head looks to the right. I tried adjustbox, ...
0
votes
2answers
58 views
Is it possible to rotate this graph in latex?
Is it possible to draw this graph in latex ?
I want to rotate the given picture so that I can get a horizontal picture of this.
I tried using
\includegraphics[angle=270,origin=c]{pic}
\begin{...
1
vote
1answer
58 views
having issue with sidewaystable environment
I am using the sidewaystable environment to fit a big table into one page. The template that I am using is INFORMS Journal on Computing Style Files provided here; the document class is called ...
1
vote
0answers
143 views
Rotating a full-page floating figure landscape
I have a group of 4 tables (tabularxs) that are laid out in a 2x2 grid. I'd like for them to take up a full page in landscape, so naturally I turned to the fltpage package to get them to take up a ...
1
vote
1answer
37 views
How to align rotated table cells
I need help with aligning rotated cell text. The problem is that I don't know in advance the text that appears in the table, so I can't use something like \settowidth\rotheadsize{text}.
This is what ...
0
votes
1answer
71 views
Sidewaysfigure can not place figure in the correct place
I am using the sidewaysfigure command to place a large figure in a landscape position. However, I am not able to place the figures between the texts. All figures are displaced to the end of the PDF ...
0
votes
1answer
125 views
Rotate image in LaTeX
I would like to rotate an image (in LATEX) keeping it at the same location (I just want to rotate it) In order to do that I used \begin{sidewaysfigure}[H] but is not working.
The current output: The ...
2
votes
1answer
83 views
Complex systems of spatial vectors
I want to learn how to build complex systems of spatial vectors in tikZ/PGF (i do not know how to do this, because a beginner). As an example, i use the figure on the right.
did not find the most ...
0
votes
0answers
19 views
Auto rotation Images JWP with ESIF data
I am inserting automatically on my files images that I take with my camera, but they are rotated. I would like to know if there is a form to autorotate the images on basis to the EXIF information ...
0
votes
0answers
26 views
Section Title in rotated vertical box at the margin
I am using the article document class. Can you help me in having the section Title in rotated vertical box at the margin ? I found a way to do the Chapter Title in rotated vertical box at the margin ...
0
votes
0answers
38 views
turnpage inverts table in aastex 6.3
I'm using aastex 6.3 to format a document and I have need to include several tables in landscape mode. I have tried the rotatetable environment that comes with aastex, but while this would work if I ...
2
votes
1answer
32 views
\rotatebox error with prebreak in \lstlisting
Command \rotatebox generates error when used with non-orthogonal (not a multiple of 90) angles in prebreak of a \lstlisting.
Here is an example:
\documentclass{article}
\usepackage{graphicx, listings}...
0
votes
1answer
40 views
Incompatibility between rotfloat and hyperref?
Latex is creating a blank page before a sideways table. Initially, I thought this was a problem with sideways table (see Landscape mode causes a blankpage). Indeed the blank page goes away if I use ...
0
votes
1answer
41 views
How to fit sidewaystable and sidewaysfigure in one page
I want to put one sidewaystable and one sidewaysfigure in one page to save page space. However, according to this link, these sideways floats always placed on a page of its own. I am wondering if ...
1
vote
1answer
44 views
Tiltle of a big table in overleaf
I am using overleaf latex website for my thesis. I am trying to write a title above a table; I have tried different way but I do not know how. Would you please help!
\documentclass[12pt]{uthesis-...
3
votes
2answers
106 views
Rotating polar contour plot messes with alignment of plot and axis
I am generating polar contour plots. In my industry, it is convention to put 0 degrees on the bottom rather than the right. My initial attempt was to use rotate=-90 within the polaraxis environment, ...
1
vote
1answer
46 views
How do I rotate labels in a tree diagram drawn with forest?
I am in the process of drawing a huge tree diagram that I want to fit on a single page (at the moment it does not fit on an A1 page). A simple way to do this would be to rotate the labels. I know this ...
0
votes
1answer
44 views
On the proper orientation of sideway figures in book documentclass
Consider the following mwe
\documentclass{book}
\usepackage{lipsum}
\usepackage{graphicx}
\usepackage{rotating}
\begin{document}
\lipsum[1-10]
\clearpage
\begin{sidewaysfigure}[h!]
\...
2
votes
1answer
69 views
Determine position of a coordinate after rotate around?
I managed to position some cubes defined as pics on a single plane, and now I'd like to determine the position of the lower frame in every box, so that a vector from origin to this location can be ...
1
vote
1answer
44 views
“LaTeX Error: Not in outer par mode.” When Rotating a Table
I wanted to rotate my table using sidewaystable in LaTeX, but it turned out to be wrong with the error message LaTeX Error: Not in outer par mode., whose location is marked with %'s below.
% !TEX ...
