Questions tagged [scale]
The scale tag has no usage guidance.
83
questions
0
votes
1
answer
49
views
Scaling dsfont without scalerel (any alternatives?)
My problem is as follows: I would like to use the upright fourier package symbols together with dsfont. This produces:
I therefore want to scale the dsfont symbols down to the same size as the ...
0
votes
0
answers
23
views
Table formating [duplicate]
To whom it may concern:
I am using Overleaf. The table below is too wide for the page. I am thinking of reducing the scale/font for the entire table in one go unless there is a better way.
Thank you ...
- 1
1
vote
1
answer
34
views
looks like the dimension x-axis and y-axis is a bit off
Why is the scale not the same at x-axis and y-axis, looks like the y is a litte bit smaller.
\documentclass[border=1 cm]{standalone}
\usepackage{amsmath}
\usepackage{pgfplots,tikz}
\usepackage{bm}
\...
- 229
2
votes
2
answers
205
views
Wasysym astrological symbol does not resize appropriately in math (e.g. subscript/superscript)
I am using the symbol \sagittarius from wasysym in math mode, and it does not resize appropriately e.g. when it appears in a subscript or superscript. How can I fix this?
This question is a special ...
- 454
0
votes
1
answer
56
views
How to center smaller unscaled page on A4 page with pdfjam
I have pages sized 145×205 mm. I can put two-in-one with command:
pdfjam file.pdf --nup 2x1 --landscape --twoside \
--papersize '{205mm,290mm}' --outfile nup.pdf
Now I want to put ...
- 1,273
0
votes
1
answer
48
views
Rescaling Type 1 fonts in entire document, text and math modes
A double-struck character set that I like is available in txmiaX font which comes with newtx package. I have been trying to move most of my math fonts to OTF versions and the closest I have found to ...
- 95
0
votes
0
answers
33
views
How can I scale the .tikz picture? I tried using tikzpicture but then it says TeX Capacity exceeded, so I sticked to minipage
\begin{figure}[H]
\begin{minipage}{.5\linewidth}
\centering
\def\svgwidth{1.0\textwidth}
\def\svgwidth{100pt}
\import{pdf/}{/diodebridge.tikz}
\end{minipage}
\begin{...
- 1
1
vote
1
answer
181
views
On Scaling the Contents of a Minipage
Consider the code
\documentclass[12pt]{book}
\usepackage{scalerel,scalefnt}
\usepackage[showframe,paperwidth=5.5in,paperheight=8.25in]{geometry}
\textwidth=4in
\textheight=6.40in
\voffset -7pt
\...
- 8,491
1
vote
0
answers
68
views
Enlarging a Very Small Image Clearly
I would like to (clearly) enlarge a very small image.
However, when I use a typical approach by adjusting the scaling factor, I get a fuzzy image.
For example, consider
\documentclass{book}
\...
- 8,491
3
votes
1
answer
144
views
How to scale tikz pictures that include matrices?
The following LaTeX document is saved in a file whose path is ~/test.tex.
\documentclass[tikz,border=5mm]{standalone}
\begin{document}
\tikz[transform shape, scale=1.0] \draw (0,0) rectangle (1,1);
...
- 10.9k
0
votes
0
answers
30
views
Scaling a tikzpicture changes the proportional size of the spaces between the drawn figures
The following LaTeX document is saved in a file whose path is ~/test.tex.
\documentclass[border=1cm,tikz]{standalone}
\tikzset{square/.pic={\draw (0,0) rectangle (1,1);}}
\begin{document}
\begin{...
- 10.9k
2
votes
1
answer
56
views
scaling diagrams in a table
Can anybody help me scale the elements in my table? It does render but it gives me error messages which go away if I just keep pressing enter, any help with the code so it just runs?
\documentclass{...
- 709
2
votes
1
answer
88
views
Calculate ratio between lengths/scale
I would like to calculate the the ratio between two lengths in order to automatically get the scale for a map included using the mercatormap package. For instance, I want the map to show 1km in the ...
- 179
0
votes
0
answers
35
views
Reset `tikz` scale after using small mindmap
I'm preparing a beamer presentation and have a complicated mindmap in it.
To make it nicely fit on the frames I use \tikzset{small mindmap}.
On subsequent frames I have images with nicely drawn scale ...
- 7,644
0
votes
1
answer
183
views
How to fix the number lines to to fit on the page
I am troubling how to fix my placements for these number lines in my latex Documents. The number lines are all of over the place. There is massive space between my examples and numberlines
\...
- 33
2
votes
1
answer
69
views
Scalebox method returns error while using binom
$\scalebox{2}{\binom{2}{3x+3}}$
The code works if I use mathlarger, but curious to know why scalebox doesn't work here and what's wrong with my code as I've been working on this for an hour but didn'...
- 23
0
votes
1
answer
130
views
How can i center my tikzpicture despite changing the scale?
i recently started using Tikz and i can't solve this problem despite looking similiar problems up. I i try to scale my picture from 1 to 1.2 or higher the centering doesnt work.
I hope someone can ...
- 1
0
votes
0
answers
43
views
Limit image width and heigth, if manual scale exceeds page width or height
Objective
I have a few images which I would prefer to all have the same scaling, with the exception of images that are too wide or too tall to fit on a single page.
Code to Limit Image Width
% Auto ...
- 257
2
votes
1
answer
66
views
Automatically scale text up as large as possible to fit within certain page count
Using relsize's \relscale{<scaling factor>}, is there a way to automatically set the scale so that text is as large as possible but producing a document no more than a specified number of pages?
- 2,141
0
votes
0
answers
21
views
Use scale if latex image is small enough, center in page otherwise [duplicate]
I automatically generate a bunch of diagrams, and I'd like them to be automatically formatted to fit the page according to the following style:
If the diagram (in the form of a .png figure) is ...
- 257
1
vote
1
answer
147
views
How resize a long table? (scalebox doesn't work)
I am writing to you because I would like to resize a long rotated table but \scalebox command does not work.
Here is an example of my input:
\documentclass[a4paper,12pt,openright,oneside]{book}
\...
- 11
0
votes
2
answers
250
views
'Fill' image within a box while maintaining aspect ratio
I want to specify a box with certain dimensions, say \textwidth by \textheight, and then "fill" it with an image such that the image aspect ratio is maintained, there is no white space in ...
- 160
3
votes
2
answers
72
views
Centering sub/superscript of operator after scaling
I would like to make the sub-/supperscript smaller 10% and use package scalerel to do that.
Everything is fine until I find out that the sub-/superscript in operators are also scaled but they are not ...
- 139
2
votes
1
answer
195
views
Asymptote label does not scale with picture
This is probably a question that has been answered many times before. For some reason I cannot find the answer in the Asymptote manual or in StackExchange although I have searched diligently. I have ...
- 453
5
votes
2
answers
428
views
\Scalefont Not Scaling (Strictly) Monotonically
I have noticed that when using the command \scalefont{} (from the scalefnt package), a decrease in the scaling factor does not always produce a corresponding decrease in the displayed font size.
To ...
- 8,491
2
votes
1
answer
68
views
Get length of segments. The result is not the same in different scale
I have a marco \mylengthcm to get length of segments. But the result is not the same in different scale. What do I have to do to get the same result? Thank you for helping me.
This is my code
\...
- 47
1
vote
1
answer
163
views
3 pgfplots plots, all in the same beamer frame
I have a beamer frame inside which I want to include a figure composed of 3 independent plots, like this:
Please note that each one of these has completely different axis domain and unit vector ratio*...
- 1,103
2
votes
2
answers
214
views
zscale is not recognized
I am trying to draw my own 3d shapes in tikz. Arguments "xscale" and "yscale" work as expected; however, apparently there is no "zscale". Is there any quick fix to this?
...
- 393
0
votes
1
answer
198
views
How to autoscale Figure Environment to fit page with text
I'm trying to complete a scientific report and am struggling to scale a figure (and its caption) onto a page that is partially filled with text, so that it occupies the remaining space space.
This is ...
- 3
0
votes
0
answers
219
views
Image only being made smaller by \includegraphics [scale...]
Working in rmarkdown. This is my YAML:
output:
pdf_document:
latex_engine: xelatex
I have one image that I would like to increase the size of as the font inside is small:
\begin{figure}[h]
\...
- 135
6
votes
1
answer
238
views
What's the difference between fontsize and scale?
In the \newwatermark two options fontsize=15pt and scale=10,What's the difference between them?
\documentclass{book}
\usepackage{xcolor}
\usepackage[printwatermark]{xwatermark}
\usepackage{blindtext}
...
- 63
0
votes
1
answer
259
views
Break up horizontal longtable
I tried to figure this out on my own. However, nothing seemed to work. I have a super long table, but its formatted differently than a normal table as it is oriented horizontally. If i can i would ...
0
votes
1
answer
84
views
How to scale graphic?
I have this graph but I want to scale the x-axis so it can be visualized better.
This is the function abs(16*(\x)^3-24*(\x)^2+12*(\x)+1)
-1
votes
1
answer
495
views
why I am not able to see minor ticks on one of the axes on log scale?
I am plotting a graph using pgfplots wherein both axes are on the log scale. I am not able to see minor ticks on y-axis, though there is nothing that should prevent it from appearing.
\documentclass[...
- 131
0
votes
1
answer
465
views
How to scale entire document or use bigger fonts?
I want to create a latex document for solving exercises online.
Beamer is one option, but I would need a full A4 page for writing down the solution with my tablet using a PDF annotator.
Since writing ...
- 521
1
vote
1
answer
724
views
pdfpages not scaling the pdf when fitpaper is true
I have created a pdf using the following tex code. its 400pt x 400pt size.
\documentclass[version=3.21]{scrartcl}
\usepackage{pdfpages}
\usepackage[showframe]{geometry}
\usepackage[automark,...
- 265
0
votes
2
answers
144
views
tikzpicture: make a \foreach \draw [yshift=\n*\u] stop at coordinate 1
Consider the bottom section of this MWE, namely everything below (% Image Ruler y):
\documentclass{article}
\usepackage{mwe} % Dummy images
\usepackage[skins]{tcolorbox}
\tcbuselibrary{raster}
\...
- 1,753
5
votes
2
answers
419
views
Scaling a virtual ruler (scale) to equally-sized pictures (for multiple pictures, 360° product photography)
Imagine you have lots of slightly different images of an object like this, all taken from the same distance, with the object only rotating around its center (thus, on all pictures, the fossil will be ...
- 1,753
0
votes
1
answer
166
views
Get value of global scale in in TikZ-picture [duplicate]
I calculate some lengths of a path (without the use of the let operator!).
To achieve that I use the \pgfgetlastxy{}{}; command (which works fine so far) but if I scale the picture, the calculations ...
- 1,182
2
votes
1
answer
98
views
Scale own math symbol / image appropriately
In this thread we learned how to create our own math symbol. Now the question is how we force it to scale appropriately when used in sub- or superscript:
See the following example:
\documentclass[12pt]...
- 181
0
votes
2
answers
63
views
Scalation problem in flowchart
Im getting a problem with the background when the tikz figure is scaled. This is my MWE:
\documentclass[14pt,a4paper]{extarticle} %,twoside Usado en latex-ssau-gost-style-master
%\usepackage{mutavel} ...
- 135
0
votes
1
answer
137
views
istgame error on correct code
Code:
\documentclass[12pt]{article}
\usepackage{istgame}
\usepackage{tikz}
\usetikzlibrary{shapes,arrows.meta, positioning}
\usepackage{enumitem}
\usepackage{float}
\usepackage[margin=1in]{geometry}
\...
- 1,615
0
votes
1
answer
184
views
Cannot Scale Integral Symbol using scaleobj [closed]
Hi I'm try to reduce the size of my integral sign so it fits within the same line as the rest of my equation. I tried using scaleobj to reduce the size, but I cannot figure out why I'm getting an "...
- 13
0
votes
0
answers
551
views
Image disappears when using \textwidth or \columnwidth
I am trying to insert an image in my document using one of the relative scales, such as \columnwidth or \textwidth. When I use one of them, the image disappears, but the label is present on the text:
...
- 101
-1
votes
1
answer
95
views
How can I narrow a text using a command instead of scalebox{0.5}[1.0]{}?
For short, I got this
\usepackage{tocloft}
{\renewcommand{\cftsecfont}{\rmfamily}}
which sets the section family font in TOC, and I need a scalebox-like command to narrow the section font on TOC. ...
- 1
2
votes
2
answers
668
views
tikz scale everything: paths and text
I feel like this should be really simple, but I cannot figure out how to do it.
I want to scale a tikz figure entirely, paths and text.
I tried both of these, but neither causes the font to scale.
...
- 1,240
1
vote
1
answer
315
views
Adjusting line spacing to original format with symbols with underset
I have set the line spacing of my Latex document to 1.5.
In some part of my text, I use mathematical symbols with "underset". This has increased the line spacing compared to the original defined ...
- 161
0
votes
1
answer
40
views
Scaling of frame creates a little point
I am trying to figure out why latex puts a little point after at the beginning of align environment I am scaling to fit the pagewidth.
As an example:
\documentclass{article}
\usepackage{amsmath}
\...
- 213
1
vote
2
answers
329
views
Get outermost coordinates/length in a Tikz-picture
From my previous question/answer Tikz image within a defined box (& the textpos package), @frougon provided a great solution. And now, I'm seeking to have a standard scaling for all of my Tikz-...
- 301
1
vote
0
answers
65
views
Scaling a figure in twocolumn environment [duplicate]
I am trying to rescale a figure while in twocolumn environment, but all attempts result in error. Here is what doesn't give an error:
I want to, however resize the picture, and when I try I get this ...
- 11