Questions tagged [scrartcl]
scrarctl is the KOMA Script equivalent of article. You may combine it with the more general koma-script tag.
51
questions
1
vote
1
answer
42
views
KOMA scrartcl indent by section
so I know this is not that of a best practice but I have a template that I need to reproduce and words makes it easy to do so....
I need to indent the full text (not just \parindent) depending on the ...
- 175
0
votes
0
answers
27
views
Change Section Font
Is there any way to change the way the section-titles are formated in the ‚exam‘ document-class to exactly the way they are formated in the ‚scrartcl‘ document-class?
- 13
0
votes
1
answer
44
views
Undefined (Opening, Encl, Subject) control sequence in template of scrartcl document
Hi I am using this overleaf template for a presentation letter based on the Classic thesis template by André Miede:
https://www.overleaf.com/latex/templates/carta-de-apresentacao-template/gpwkqmqwncsc
...
- 103
2
votes
1
answer
61
views
Changing \contentsname in scrartcl
When using the article document class, I can customise the title of the table of contents like so:
\documentclass{article}
\renewcommand{\contentsname}{Whatever}
\begin{document}
\tableofcontents
\...
- 457
0
votes
2
answers
55
views
scrartcl toc sectionentrywithdots formatting
Im pretty new to tex. I managed to get everything I wanted.
But I am stuck with the table of contents.
\documentclass[12pt,oneside,titlepage,listof=totoc,bibliography=totoc,toc=sectionentrywithdots]{...
- 7
0
votes
0
answers
40
views
Howto Use Figure Placement 'H' in scrartcl
How can I use the figure placement option 'H' from the float package (or some other way) within a scrartcl document?
I always get
! LaTeX Error: Unknown float option `H'.
Here is a MWE:
\...
- 521
1
vote
1
answer
105
views
Full width section titles in scrartcl with parskip option
The subsection title in the following document should fit in a single line. The last word slips into the second line, although there is still enough space in the first.
\documentclass[parskip = half+]{...
2
votes
1
answer
94
views
scrartcl letter creates unwanted "-" signs (foldmarks) in between sections
I am writing a cover letter with the scrartcl documentclass, using the scrletter package. This is my MWE:
\documentclass{scrartcl}
\usepackage{scrletter}
\usepackage{lipsum}
\usepackage{natbib}
\...
- 67
3
votes
1
answer
149
views
Nameref is broken after renewing sections command
To comply with the rules of my university I have to not print section headings and make some other changes to TOCs and sections. Here is a (more or less minimal) MWE:
\documentclass[titlepage, ...
- 167
2
votes
1
answer
196
views
Fontenc T1 changes underscores
When using \usepackage[T1]{fontenc} to get correct umlauts, underscores are displayed much wider and subscript than without it and backslashes are much more angled and taller. Is there a way to revert ...
- 167
8
votes
2
answers
451
views
Write Author names in all CAPS - but only if it is a person
Environment: scrartcl, biblatex with biber backend, style authortitle with some modifications
My educational institution requires me to write the last names of every author in CAPS. To do this, I used ...
- 167
1
vote
1
answer
240
views
Create footer only on one page in Koma-script
In the documentclass scrartcl, I’m creating a command to renew the header and footer mid-document.
The header should not show on the page on which the command is issued, but on all other pages.
This ...
- 1,563
0
votes
1
answer
48
views
Conditionally add author to header
I've a documentclass myclass that's based on KOMA-script's scrartcl class.
MWE: myclass.cls
\NeedsTeXFormat{LaTeX2e}
% The document class name
\ProvidesClass{myclass}
% https://tex.stackexchange.com/...
- 27
1
vote
1
answer
431
views
How to put the current date in the footer of every page
My document class is scrartcl and I defined the pagemargins with geometry as follows
\documentclass[11pt]{scrartcl}
\usepackage[left=2cm, right=1cm, bottom=2cm, a4paper, twoside]{geometry}
So the ...
- 301
5
votes
1
answer
211
views
OpenSans package doesn't affect title (scrartcl)
I intend to set Open Sans as the entire document's font.
However, if I use the opensans package with the default option it doesn't affect the title and headings of the scrartcl class.
MWE:
\...
- 85
1
vote
1
answer
148
views
Remove section name from header only from pages where the section starts
I would like to remove the section name from my header only on pages where a section starts. Also I would like to keep using scrlayer-scrpage because it's already implemented in my code. Of course I ...
- 83
1
vote
1
answer
263
views
Use sections of an article as chapters in a book
I'm working on an scrartcl which consists of several sections, all of them in separate files.
Now I want to use the same source files also in a part (not a chapter) of a scrbook.
In this second ...
- 249
3
votes
1
answer
85
views
Troubles with an article in two columns with KOMA Script
I'm working on an article in KOMA Script, the idea is to have it in double column, but I'm having some problems that I can't solve:
I have 2 abstracts in different languages, if I deactivate the ...
- 3,644
3
votes
1
answer
191
views
How can I shift the table of contents upwards in Latex?
I am writing a paper in Latex using the editor Overleaf. I am using the scrartcl class with 12pt font size and for the table of contents I use the packages
\usepackage{etoolbox, tocloft}
\usepackage[...
- 33
1
vote
2
answers
33
views
Horizontal spacing in header between sectionnumber and sectiontitle
I dont find a way to create a horizontal spacing, lets say 2 cm, in my header between the sectionnumber and the sectiontitle. Could you please give some advice? Im using scrartcl and scrlayer-scrpage. ...
- 35
3
votes
2
answers
282
views
Modify subsection numbering in KOMA
In my scrartcl, I want to modify the subsection numbering as UNIT I, without being preceded by section numbering. How I can do that?
An MWE is:
\documentclass{scrartcl}
\begin{document}
\section{Hello}...
- 2,129
0
votes
1
answer
293
views
empty page style on first page of scrartcl
A document using class scrartcl by default includes a page number on every page, including the first. What is the easiest way to suppress the typesetting of the page number on the first page (which, ...
- 261
0
votes
2
answers
280
views
How to convert a scrlttr2 letter to scrletter?
I'm asking how to switch to scrletter, when you were using scrlttr2 before, because it has been suggested for me. I'd like to use the document class scrartcl, in case that matters.
I know there is the ...
- 1,040
4
votes
2
answers
1k
views
What is the difference between scrletter and scrlttr2?
I'm asking about scrletter vs scrlttr2 , because it has been suggested for me.
I know there is the huge doc about scrguien, but I do not have time to read that and want a quick summary of the main ...
- 1,040
2
votes
1
answer
404
views
Increase text width in KOMA scrartcl landscape
I have a KOMA scrartcl landscape document and would like to change/increase the textwidth. How do I do this? All the solutions I found only affect a single page or a page range. I want to do it for ...
- 785
1
vote
0
answers
41
views
longtable makes scrartcl collide with footer after float
It seems like having a longtable on the same page as a float that has moved there causes the length calculation to bail out so that the text covers the footer. MWE:
\documentclass{scrartcl}
\...
- 146
0
votes
1
answer
480
views
Koma-Script scrartcl.cls + newfile.sty: \readstream stops after \section+newline in file
I am using newfile.sty to generate a file, which I then read again. With Koma-Script it stopped working since TeXLive 2020: If the file contains a newline after a sectioning command like \chapter or \...
- 183
1
vote
2
answers
301
views
How can I change the font size for headings and page numbers in the table of contents?
I managed to customize the formatting of the font for the TOC entries for the sections in my document.
How can I set the formatting of the levels below section with scrartcl's (KOMA's) help? Is this ...
- 6,462
0
votes
1
answer
41
views
scrartcl produces \par in last line of document
You can see here
\documentclass[parskip=half]{scrartcl}
\usepackage[T1]{fontenc}
\begin{document}
|\hfill|\\
%\setlength{\parfillskip}{0pt plus 1fil}
Datum, Ort \hfill Unterschrift Mieter%
...
- 471
4
votes
2
answers
437
views
How to reset counter each section with secnumdepth set to 0
I am writing a document using the KOMA-class scrartcl. I enabled \setcounter{secnumdepth}{0} at the beginning because I intend to use some other kind of numbering which I write into the section header ...
- 6,462
1
vote
1
answer
146
views
How would I go about to get fold marks with scrartcl?
Given the following MWE (I used LuaLaTeX to compile it):
\documentclass[version=last,paper=A4,fontsize=14pt]{scrartcl}
\usepackage{libertine-otf}
\usepackage[german]{babel}
\usepackage{microtype}
\...
- 935
1
vote
1
answer
395
views
Swap section title and section number in KOMA Script scrartcl
Since it is not recommended to use titlesec in KOMA script, I'm looking for some alternative to swap section title and section number, having
Title 1
instead of
1 Title
Minimal example:
\...
- 395
0
votes
0
answers
32
views
Subsection as part of the left column
I would like to have subsection titles be part of a table so that the output is something like this
\documentclass{scrartcl}
\usepackage{tabu}
\begin{document}
\begin{tabu}{p{5cm} p{5cm}}
\...
- 119
1
vote
0
answers
148
views
lualatex and unicode-math
In this MWE
\documentclass{scrartcl}
\usepackage[spanish, activeacute]{babel}
\usepackage{unicode-math}
\usepackage{hyperref}
\begin{document}
\section{A section}
\begin{equation}
j =\sqrt{-1}
...
- 984
9
votes
3
answers
435
views
Replace part number by an acronym
I would like to replace a part number by an abbreviation. For exemple, concerning the part algebra of the following MWE, I would like that the first chapter be called ALG.1 instead of I.1 (and the ...
- 783
2
votes
1
answer
1k
views
koma script, scrartcl keywords for the abstract
I am a newbie in Latex and Koma scripts.
I would like to add Keywords: bla, bla, bla just under the abstract with the same format in scrartcl class.
I appreciate any help.
- 47
1
vote
1
answer
75
views
KOMA classes and Hebrew script with Polyglossia
I am trying to type a text with both Hebrew and English. Following this answer, I was trying to use polyglossia together with a Hebrew Font I downloaded from OpenSiddur.
\documentclass{scrartcl}
\...
- 313
3
votes
1
answer
552
views
Captions above figures w/ KOMA-Script -- captions=heading seems to be ignored
I would like to have figure captions appear above the figures themselves. The KOMA-Script documentation seems to suggest this can be achieved by setting the captions=heading option. But in the MWE ...
- 33
2
votes
1
answer
203
views
KOMA & mathbbol: wrong font width in PDF
How can I use KOMA-Script along with the package mathbbol?
%\documentclass{article} % works
\documentclass{scrartcl} % fails
\usepackage{mathbbol}
\usepackage{pdfx} % just to calm PDF/A-validators a ...
0
votes
1
answer
277
views
How include two horizontal lines below and above section in scrartcl as well as "Chapter X" label?
I am using the scrartcl document class in LaTeX (and I need to use this for several reasons). Now, I want to get something like this for every section:
Currently I am doing the following:
\...
- 204
1
vote
1
answer
306
views
Text following section name on same line (scrartcl) with section numbers in margin
I would like to have text on the same line as my subsubsections (only) using KOMA scrartcl, AND have my section numbers in the margin. For example:
1.1.1 Subsubsection Heading Some text that ...
- 1,382
0
votes
1
answer
604
views
Header missing on one page (first page of section)
A problem I am having is that I am missing a header on exactly one page throughout the 140 pages of my thesis and I can not figure out why. I am not using any packages like fancyhdr for headers - just ...
- 1
2
votes
2
answers
433
views
"Annex" to letter in appendix + table of contents
I use the document class scrartcl for my work and until the creation of my attachment everything was wonderful.
Unfortunately, I have not been able to put the word "Appendix" before the letters in the ...
- 119
2
votes
1
answer
62
views
reference from equation does not work well
I have a problem with: \numberwithin{equation}{section}
it only references the equation number not the chapter and the equation number.
\documentclass[]{scrartcl}
\usepackage[T1]{fontenc}
\...
- 119
1
vote
1
answer
41
views
Ignore parskip if using dialogue package
I am using the dialogue package in my document and I'm using scrartcl with option parskip.
How can I switch off parskip inside the dialogues? I don’t want to have that space between the lines.
\...
- 13
1
vote
1
answer
1k
views
Appendix Scrartcl with appendix package and section size
For a smaller report I have switched from scrrprt to scrrartcl.
Using the appendix package the title "appendix" looks fine within toc (no number or letter preceeding; the sub-appendices however should ...
- 369
2
votes
1
answer
7k
views
What KOMA-Script article (scrartcl) has that KOMA-Script book (scrbook) does not?
I'm trying to understand the difference between the KOMA-Script article class scrartcl and the KOMA-Script book class scrbook?
As I understanding actually I can do every thing I can do with the ...
- 2,521
3
votes
2
answers
2k
views
Reduce space between title and top margin in scrartcl
How can I reduce the space between the title and the top margin in my example document with KOMA-Script class scrartcl below?
\documentclass[a4paper,11pt]{scrartcl}
\usepackage{blindtext}
\title{This ...
- 33
3
votes
1
answer
143
views
csquotes, hyperref and scrartcl produce multiple errors when \makeautoquote and \makeautoquote* are used
I am facing a weird error when compiling a document. I am working for some time now on this doc and faced these problems some time after updating my texlive 2018 installation via tlgmr.
This MWE ...
- 903
2
votes
1
answer
1k
views
How to use design of titlepage from scrbook inside scrartcl?
The default titlepage of documentclass scrartcl looks very compressed and not really nice.
Minimum Working Example (MWE):
\documentclass{scrartcl}
\begin{document}
\titlehead{Head of titlepage}...
- 3,608