Questions tagged [sectioning]

{sectioning} is about commands like \chapter or \section forming the logical structure of documents. For questions specifically about {parts}, {chapters} or lower-level commands ({sections-paragraphs}), add the respective tag to the more general {sectioning}. A popular package is {titlesec}.

Filter by
Sorted by
Tagged with
3
votes
2answers
34 views

Trouble using the package `fancyhdr`

I am trying to use the fancyhdr package, as per the title, to insert titles on the top right and top left of each page. The problem is that I have titles that are too long to fit on one line and I ...
1
vote
1answer
31 views

How to keep section numbering and title in same line?

I am working to modify this Latex template from stackexchange to use for my homework. Namely, the template currently splits the title of a subsection from its numbering, like so: And, as mentioned in ...
0
votes
0answers
34 views

How to make the output of \section invisible?

I'm trying to do this: \documentclass{article} \begin{document} \let\oldsection\section \renewcommand\section[1]{ \invisible{\oldsection[1]} \MyOwnSectionFormattingHere #1 } \section{Introduction} ...
2
votes
1answer
29 views

How to customise numbering in order to subdivide a single section into two parts?

I have an article class document. I am trying to divide a "section" into two parts such that a letter is added to the section number for the different parts. By "dividing" I mean ...
0
votes
1answer
24 views

Book class \sectionmark not working when section heading is on first page of section

Firstly, I know that this question has been asked at least twice elsewhere, but in one case the first answer uses memoir class, where it still uses the long version on the first page but wraps it and ...
0
votes
1answer
25 views

macro to redefine section for accessibility tagging doesn't work with \tableofcontents

I wrote a macro to tag section headings using the tagpdf package. It works unless I have a \tableofcontents directive. In that case, any starred sections, such as the contents section itself, are ...
0
votes
1answer
50 views

Undefined control sequence in sections and subsections

I'm new to LaTex and writing my first paper. For some reason a lot of my sections and subsections have the following error: My code is quite long so I'm not sure which lines to share other than this ...
0
votes
0answers
30 views

How to remove diacritics from uppercase greek in TOC and headings?

The solution to this problem partially solves the issue, but uppercase greek words are still appearing with diacritics in the table of contents. Is there any other way around this? \documentclass{...
0
votes
1answer
27 views

I need my Section header on same page as my image, i've tried different varitions of htbp added and took out float packages. here is what i have in [duplicate]

\section [Conduit Assemblies]{\centering Conduit Assemblies} \begin{figure} [htbp] \renewcommand\thefigure{19} % Make this figure 19 \centering \includegraphics[scale = 0.65]{figure19} ...
1
vote
1answer
28 views

Exclude index of tables, figures and contents from "titleformat" style

Good afternoon. Considering the following code, which modifies the headings style: \documentclass[12pt,a4paper]{book} \usepackage{lmodern} \usepackage[explicit]{titlesec} \usepackage{microtype} \...
1
vote
0answers
17 views

Add only subsections under current section to the section page in metropolis theme at beginning of sections

I'd like to add the list of all subsections in the current section to the section page at the beginning of each section. I am using the metropolis theme. I did some research and found a way to do so ...
0
votes
0answers
70 views

How to continue same section to next page in Latex?

So for resume I chose one of the pre-defined samples and started to edit it. And now within the same section of " Experiences" my resume exceeds the page but the content in not continuing ...
1
vote
1answer
19 views

Make paragraph title look like (sub)section's one in Koma scrreprt

I'm writing a document in Koma-script using the class scrreprt. I'm using the \paragraph{My paragraph's title} command to set my "subsubsubsection" titles. However, Koma-script make these ...
0
votes
0answers
34 views

No space after Section label in overleaf

No space after the Section label: You can see the output is: \documentclass[10pt,twocolumn]{ICCAS2021} \usepackage{subcaption} \usepackage{hyperref} \usepackage{xurl} \...
0
votes
0answers
43 views

Chapter numbers show, but Section and Subsection numbers do not show

My Chapter numbers show in text, however my section and subsection numbers are hidden, despite the numbering appearing on the toc. This is most likely due to a silly setting I have, but I cannot see ...
0
votes
1answer
27 views

Floating wrapfigure leaves whole article text wrapped if unnumbered sections are used

I have the following article: \documentclass[10pt]{article} \usepackage{wrapfig} \usepackage{graphicx} \usepackage{lipsum} \begin{document} Pig chislic turducken short ribs boudin jerky venison ...
0
votes
1answer
20 views

Start numbering at subsection level, leaving sections unnumbered [duplicate]

I would like to number my sections as follows A section Another section A third section 1 - A subsection 1.1 - A subsubsection 1.2 - Another subsubsection As you can see the sections are not numbered ...
1
vote
1answer
16 views

Show unnumbered sections anywhere in Beamer TOC

Section 10.5 of the LaTeX Beamer manual specifies the different options for generating a table of contents. One of them is: firstsection=⟨section number⟩ specifies which section should be numbered as ...
0
votes
0answers
34 views

How can I change the chapter naming?

Sorry for the bad english. When I type \chapter{Title} I want to have Section ''Title'' instead of Chapter 1 or whatever the current chapter number is. Thanks!
0
votes
0answers
32 views

makeindex is skipping some entries

When checking the PDF file of the document I'm currently working on, I've noticed that some of the Chapters and Parts are missing in the side-bar index. I've been using imakeidx as shown below: \...
1
vote
2answers
34 views

Subsection Numbering using LaTeXbangla

I'm using LaTeXbanglato write in Bengali/Bangla. I'd like the Section and Subsection numbering to appear as [১] [১.১], but instead they are surfacing as [১.] for both, with the only difference between ...
1
vote
1answer
21 views

titlespacing command does not seem to modify spacing after section title

I'm trying to make my own custom section title spacing using the titlespacing command in the titlesec package. I devised the following MWE: \documentclass[11pt, a4paper]{article} \usepackage{titlesec} ...
1
vote
0answers
37 views

I am trying to have multiple nomenclatures for different sections within an article class document

I am writing an article using lyx and I am wanting to have different nomenclatures in each section as some symbols are used on multiple occasions but have different meanings. I looked through ...
0
votes
1answer
37 views

Section with option for new line or run in (using lualatex, KOMA-Script, xparse)

I'm renewing the subsubsection command such that I can either place the following text on the same line (default), or leave some space, with an ! token passed. It appears that for combinations of ...
1
vote
1answer
46 views

Not restart section numbering after each part in ConTeXt

I just want to follow section numbers from the previous section. In the example text: \starttext \part{First part} \section{1st section} \part{Second part} \section{2nd section} \stoptext ...
1
vote
1answer
27 views

Removing page numbers of sections from Table of contents

I can't find a way to remove only the page index of sections while keeping the page index of the subsections
1
vote
1answer
39 views

Reset frame number and total frame count per Beamer section

I'm using a LaTeX Beamer frame counter that displays \insertframenumber/\inserttotalframenumber ... which would mean that if my project has twenty frames and the slideshow is on the sixteenth frame, &...
2
votes
2answers
68 views

Hyperlink in fancy header not pointing to correct page

This is my main.tex file (adding it as whole here because I don't know what might be conflicting): \documentclass[9pt,twoside]{extbook} \usepackage{adforn} % ornaments glyphs adforn font \usepackage{...
-1
votes
0answers
32 views

Counter for sections, and subsubsections [duplicate]

I hope that LaTeX has some command to create a new counter for section, subsection and subsubsections. I use documentclass[]{book}. Furthermore I'd like that subsubsections are represented in my ...
0
votes
2answers
26 views

non-nested sections

I can get sections that are not nested in \part with \documentclass{extarticle} but although \chapter gets compiled, it is typeset indistinguishably from text. I can get chapters that are typeset as ...
1
vote
1answer
38 views

How formating chapter (no head), subsection with spaces and page number

I am trying to format the chapter, section and subsection but I have not been able to. I have included an image as a reference of what I want to do. Here are some specifics: LaTeX, by default, puts ...
3
votes
1answer
60 views

LaTeX custom section counter

Is it possible to recreate this numbering format in LaTeX?: 01. Text 0101. Text 01. Text 01. Text - Text - Text 02. Text ...
0
votes
1answer
15 views

Suppress lineskip in heading without titlesec package in memoir class

Is there a way to make sections, subsections etc. runin-like without using the titlesec package in the memoir class? \documentclass[a4paper,twoside,openany]{memoir} \begin{document} \section{Section ...
0
votes
0answers
31 views

Is there a way to place footnotes at end of each page?

In my text, I'm usually mentioning things that I would like to go as footnotes. But I want the footnotes to appear at the end of the page on which they were called. I've seen in these forums people ...
0
votes
2answers
44 views

Titles before text

I'm writing study notes using LaTeX. I'd like to introduce each section with a title describing what I'm going to discuss. I dont want: the text to be boldtype, the title to come in numbered. Is there ...
1
vote
1answer
28 views

Defining section and label in one macro

I want to define a section (or whatever) and label it at the same time. So far I get this: \documentclass{article} \usepackage{hyperref} \usepackage{nameref,cleveref} \makeatletter \...
0
votes
0answers
31 views

In scrbook: produce section numbering without chapter number

I’m compiling a scientific journal in the scrbook class with multiple chapters, each chapter being an independent article. Some articles use \section as a further structuring unit. As it is, section ...
0
votes
1answer
23 views

Beamer ToC: display all sections and subsections at first, then subsequent current section, subsections/subsubsetions

My current slides are designed to display the current section and subsections/subsubsections at the beginning of every section. MWE: \documentclass{beamer} \usepackage[utf8]{inputenc} \usetheme{Madrid}...
0
votes
1answer
43 views

How to have Chapter name in header instead of section name?

When I create a section, the section name replaces the chapter name in the header. I don't want this to happen. How can I keep the chapter name in the header (and ignore the section name)? It's not ...
0
votes
0answers
83 views

General hooks to step a counter on chapter and section regardless of whether they are numbered or unnumbered

I'm trying to step a pair of counters at each chapter and section of a document regardless of whether they are numbered or not. I don't intend to use the absolute value of these counters, I'd like to ...
0
votes
1answer
19 views

Centering subsections in amsart

I am writing some kind of notes using amsart. I want to write a subsection (or even a subsubsection) using small caps and centre it. How can I put it in the center? Consider the MWE: \documentclass{...
1
vote
1answer
28 views

Adding tex files as a single document adapting the section structure

I have several standalone documents/chapters (A.tex, B.tex, ...), that I want to assemble in a single document (Main.tex). Every chapter has its own section hierarchy (starting from sections, ...
0
votes
0answers
18 views

How to apply pagestyle{empty} if section start on top of page

How can I apply another pagestyle, if on top start new section \section and contain no text before. Example Before start section on page are contained text. NOT change pagestyle [ Section start on ...
0
votes
2answers
81 views

Can I number a group of examples: 1, 2, 3... within any given section of a chapter while in the presence of subsections?

I wish to number a set of two, three, four... examples within any given section of a chapter, beginning each set at No.1 Sorry, I am not able to construct a MWE on this occasion; I have no idea where ...
4
votes
1answer
180 views

What part of the original section command causes the noindent on the next paragraph, even with a newline?

The following examples allow the second paragraph not not have an indent. I am trying to replicate the effect of the section command, which has the ability to add the "noindent-effect" after ...
1
vote
0answers
56 views

Why I don't see the 2nd section title?

I update the packages at MikTex, and suddenly it's there is a problem with the fonts: I'm using LyX at WIN10 X64. MWE: % Preview source code %% LyX 2.3.6 created this file. For more info, see http:/...
0
votes
1answer
29 views

Input manuscripts with appendix as single chapter, with correct numbering

I am currently writing my thesis (book class, thesis.tex), which englobes different manuscripts (article class, manuscript.tex). For that I created manuscript_text.tex, which is the text part of the ...
2
votes
2answers
86 views

How to customize the horizontal rule which follows the section heading?

I am preparing my resume and want to customize the section headings. I want a horizontal rule to fill the empty space (linewidth) after the section heading. Following is what I have been able to do ...
0
votes
1answer
44 views

Numbering sections with text instead of Arabic numerals

I would like to replace the Arabic enumeration of the sectioning commands with text-based enumeration. For example, in the following document: \documentclass{scrreprt} \begin{document} \chapter{...
0
votes
1answer
34 views

How to change the color of a part of a section title in beamer?

MWE : \documentclass{beamer} \usetheme{Antibes} \begin{document} \section{Test 1: {\color{blue}test 2}} \begin{frame}{Hello} How are you? \end{frame} \end{document} gives Is it possible to ...

1
2 3 4 5
98