Questions tagged [sidewaysfigure]
The sidewaysfigure tag has no usage guidance.
54
questions
1
vote
1
answer
29
views
How to Add a Rotated Caption to Rotated Forest
I generated the following graph:
\documentclass{article}
\usepackage{rotating}
\usepackage{forest}
\useforestlibrary{edges}
\begin{document}
\begin{sideways}
\parbox{\textheight}{%
...
- 177
2
votes
0
answers
49
views
How do I place a figure right after the Appendix heading/section without having it skip onto the next page?
Edit:
Here is the minimal working example (MWE):
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{lscape}
\usepackage{rotating}
\usepackage[toc,page]{appendix}
\...
- 31
1
vote
1
answer
74
views
Sideways table appendix header not sideways
I have included a table (a graphic of a table) in my appendix. I want it to be sideways and I am able to flip it. The problem is that the appendix header "Appendix B ..." does not flip ...
0
votes
0
answers
27
views
Addressing Formatting and Figure Alignment Issues in Project on Overleaf
I'm have two issues with my project on Overleaf. First, there is a gap between sections or paragraphs, as seen in the image. Here's how it is written in LaTeX:
\setlength{\parskip}{1em}
Figure \ref{...
- 11
0
votes
1
answer
112
views
Sideways figure at beginning of chapter
In the thesis I'm writing, I have an appendix chapter with figures inserted sideways so they got ampliated. However, the first page in that chapter always stays blank, first picture moves to next page ...
- 119
0
votes
1
answer
59
views
Drawing a line graph
For an unknown reason the code doesn't compile.
\begin{figure}
\centering
\begin{tikzpicture}
\begin{axis}[
xlabel=Month,
ylabel=...
- 19
0
votes
0
answers
54
views
Sideways Figure flushed to the left side of page with text running down the right hand side
I have been trying to figure out how to achieve this for some time but seemt to be completely stuck. I have a figure (as shown below) that i have made sideways due to the style of the figure. My hope ...
- 1
0
votes
0
answers
123
views
Placement of sideways figure
I have a figure which is wide and short. I am adding this to a paper in sideways format. It shows in one page which is ok. However, the placement does not look good.
It is shown as the red figure (a). ...
0
votes
1
answer
96
views
two figures next to one with caption at same level
I want to place two figures next to one with the caption of the one on the left with the one on the bottom right at the exact same level
\documentclass{article}
\usepackage{subcaption}
\usepackage{...
- 935
0
votes
1
answer
96
views
Subfigure - Centering not working
I'd like to include two images side by side, forcing them to stick to a height of 3cm. However, the following code achieves the side by side setting, but does not enforce the subfigures to be centered ...
- 61
3
votes
1
answer
2k
views
How to insert an equation within a figure? [duplicate]
I'd insert an equation within a figure as shown in the following image.
I'd like also to visualize the number that identifies the equation.
Is it possible to obtain what I've written?
- 809
1
vote
1
answer
608
views
Unable to Align two figures
I have two figures of slightly different sizes. So I'm unable to align them vertically, as shown in the figure.
I'm using the following code.
\begin{figure}[h]
\centering
\...
- 516
1
vote
2
answers
1k
views
Placing a sideways figure, with a sideways caption, underneath a (normal) subsection heading
I have a figure that is wide (landscape orientation). It is too wide to reasonably see in its native orientation. So I have rotated it using the sidewaysfigure environment in the rotating package. ...
- 1,279
0
votes
1
answer
35
views
placing the figures same as the attached in a two column paper format
I'd like to place my figures (png files) same as the attached image (picture2.jpg). would you please help me how to correct my LATEX code to produce that?
Thanks in advance
\begin{figure*}
\...
2
votes
2
answers
448
views
Sideway figures on multiple pages
I want to place two sub figures span on multiple pages in sideway figure mode
\begin{sidewaysfigure}[h!]
\centering
\begin{subfigure}[b]{\textwidth}
\caption{\label{fig 4.10.a}...
- 21
2
votes
3
answers
875
views
Subfigures not lining up horizontally
My two subfigures wont line up next to eachother, one is higher than the other. One doesn't need rotating but the other one does. When I rotate them both then they line up correctly but they don't ...
- 21
1
vote
2
answers
101
views
How can I represent these tables in latex?
I try to draw these tables in latex. I use in order to represent one table. How can I arrange the tables as in the picture? My code for one table:
\begin{figure*}[h]
\centering
\tabcolsep=0.5cm
\...
- 155
3
votes
2
answers
2k
views
How can I resize the images?
I introduced these images into my latex work. I want to increase the size of the images but when I do this they do not align properly.
\begin{figure*}[h]
\centering
\begin{subfigure}[t]{0.25\...
- 155
0
votes
1
answer
2k
views
overfull hbox too wide in Figure
I am using this method to add 3 images as a single figure in a column such that each image appears in a different row and there's nothing else in the row. The overall figure should be in center. ...
- 163
2
votes
1
answer
5k
views
How to insert two pictures side by side in IEEE access format in two columns paper?
How can I insert two pictures in side by side format for the IEEE access format paper? I tried the following code by the pictures are two far away from each other.
\begin{figure*}[htp]
\centering
...
- 57
0
votes
1
answer
523
views
A common subcaption for two subfigures which are placed side by side
Yet another question related to How to place three figures side by side, but two figures are seen as subfigures with one main caption, and third figure as standalone.
In this attempt, I intend to ...
- 17
0
votes
1
answer
145
views
How to place six figures in a special way
My problem is an extension of previously related question.
Now, I would like to place them as shown below. I fail to extend the previous answer :(. Can anyone help me please?
- 17
0
votes
1
answer
72
views
IT is possible to use the H option with the environment figure*?
I'm using a two column article and when I use the figure* environment, since it is a big figure it is placed at the end of the document, I would like the image to occupy a full page but not a the ...
- 79
0
votes
0
answers
46
views
Figures are rotating in both direction with sidewaysfigure option
In my thesis, I want few figures to occupy the whole page in landscape. I am using sidewaysfigure option as follows.
\begin{sidewaysfigure}
\centering
\includegraphics[width=\textwidth, ...
3
votes
2
answers
800
views
A Way to Avoid Figures being Numbered in Minipage
I am currently putting together a sideways figure, which will eventually include 16 different pictures. To do this I use the minipage command/environment.
\begin{sidewaysfigure}[p]
\centering
...
- 127
0
votes
1
answer
100
views
How to add a line full of dots to an image?
How to go to the new line and draw nodes in tikz
\documentclass[tikz,border=3mm]{standalone}
\usetikzlibrary{positioning,matrix}
\begin{document}
\begin{tikzpicture}[Dotted/.style={% ...
- 963
1
vote
0
answers
288
views
How to reference a sidewaysfigure?
\begin{sidewaysfigure}
\caption{caption}
\label{figure1}
\centering
\includegraphics[width= 1.0\textwidth]{gfx/graphic}
\end{sidewaysfigure}
A sidewaysfigure created like in the code above can't get ...
- 111
0
votes
2
answers
306
views
Is it possible to rotate this graph in latex?
Is it possible to draw this graph in latex ?
I want to rotate the given picture so that I can get a horizontal picture of this.
I tried using
\includegraphics[angle=270,origin=c]{pic}
\begin{...
- 963
0
votes
1
answer
479
views
Allow figure to continue next page if it doesn't fit
I am using the following command to combine figure and want to let them continue next page if they don't fit in the page.
\begin{figure}[htb]
\centering
\begin{tabular}{@{}cccc@{}}
\includegraphics[...
- 175
1
vote
3
answers
59
views
Insert multiples images in a column of an article
I'm trying to put 3 figures on a column of an article.
I would like to put this figures in 3 subplots.
The first would be alone followed by 2 smaller subfigures in the other line like this:
But it ...
- 211
0
votes
0
answers
151
views
How to fit a caption of a figure in the column? [LATEX]
I have a double column layout in Latex, but i have a problem withb caption of a figure because text is too long and it overlap on the first column. How to fix it?
i used this:
\begin{figure}[H]
\...
0
votes
1
answer
1k
views
How to fit sidewaystable and sidewaysfigure in one page
I want to put one sidewaystable and one sidewaysfigure in one page to save page space. However, according to this link, these sideways floats always placed on a page of its own. I am wondering if ...
- 365
3
votes
1
answer
245
views
Centring sidewaysfigure full page diagram
I have a really big commutative cube that I would like to display in a figure. It seems like the easiest way to do so is to use sidewaysfigure*, since the cube is much wider than it is tall (because ...
- 399
0
votes
1
answer
839
views
On the proper orientation of sideway figures in book documentclass
Consider the following mwe
\documentclass{book}
\usepackage{lipsum}
\usepackage{graphicx}
\usepackage{rotating}
\begin{document}
\lipsum[1-10]
\clearpage
\begin{sidewaysfigure}[h!]
\...
- 7,329
0
votes
0
answers
19
views
Why when changing the width property in figure causes some spaces between the title and the text? [duplicate]
This is the LaTex code:
\begin{figure}
\centering
\includegraphics[width=80mm]{PLA.pdf}
\caption{Some figure}
\end{figure}
When I change the width to 80 it causes the problem but when I ...
1
vote
1
answer
263
views
How to avoid additional page getting rotated?
I am trying to get all sidewaysfigures automatically rotated. But for some reason I get an extra rotated page (see code and screenshot below). How can I avoid this? (This is part of a sequence of ...
- 1,807
0
votes
1
answer
375
views
How to rotate a group subfloat with sidewaysfigure
I am trying to include "sideways" subfigures according to this question How to rotate a group of figures (subfigure) from Torbjørn T.
Here is the original code I am trying to implement:
\begin{...
- 101
1
vote
0
answers
527
views
How to rotate a page with a rotated figure with "sidewaysfigure"?
I'm dealing with rotated figures on my document. I have 2 alternatives:
sidewaysfigurefrom the rotating package
landscape environment from the pdflscape package
I prefer the sidewaysfigure because ...
- 3,109
9
votes
2
answers
2k
views
How to make figures appear landscape properly?
I know of two options to put figures in landscape.
The first is to use the sidewaysfigure environment. This works very well when it comes to keeping the sequence of figures. However, it leaves the ...
- 1,807
1
vote
2
answers
132
views
How would one place a big float (figure and caption) in the whole page occupying the entire text area
I have a massive flow-diagram describing a new methodology we developed. Despite the combined efforts of my supervisor and mine, we could not split the diagram into two parts.
It was decided that the ...
5
votes
2
answers
4k
views
put images report on every page at absolute position
I'd like to have one specific image at the top left corner and another in the top right one. I tried doing this vith \lhead and \rhead, but it didn't position the images in the corners of the pages, ...
- 483
1
vote
2
answers
2k
views
No title & number for appendix chapter
I got a lil question regarding the chapters in the appendix. Already read many entries but couldn't find a satisfying solution.
In my document I have two sidewaysfigures in the appendix. As this is ...
- 11
1
vote
1
answer
569
views
What is the cause of wrong aspect ratio and in-line writings in using sideways figure in Overleaf?
I am trying to use the answer provided in the following page (this link) to maximize the size of a figure in a landscape mode along with its caption. I am doing this in Overleaf where the compile is ...
- 251
0
votes
1
answer
1k
views
Place a sidewaysfigure correctly in a two column document
I am having a problem with the alignment of my figures and text and I have attempted to create a minimal working example to illustrate the problem. Apologies that it is text heavy but I needed to add ...
- 463
1
vote
0
answers
241
views
Sidewaysfigure changing pixel aspect ratio
I'm using sidewaysfigure to insert a landscape-oriented full-page map into a 2-column, 8.5x11in pdflatex document. The original image (jpeg, submitted by author with no way to get a proper image ...
- 366
4
votes
1
answer
3k
views
Sidewaysfigure in a page with section title
I have a sidewaysfigure just after a section title. The figure is not too big for requires a new page. How can I indicate to put the sidewaysfigure after the section title?
Note: I have a serie of ...
- 3,109
4
votes
2
answers
5k
views
Sideways Figure doesn't center
I am trying to rotate a figure on the page by 90 degrees. I am using:
\usepackage{rotating}
and then my figure code looks like:
\begin{sidewaysfigure*}[ht]
\centering
\begin{tabular}{@{}cc@{}}
...
- 463
3
votes
1
answer
2k
views
How to rotate the pdf page with a sidewaystable/figure without using pdflscape? [duplicate]
I have a sidewaysfigure, however I'd like to rotate the pdf page containing this table, avoiding the use of pdflscape package. How can I do this?
\documentclass[12pt,a4paper]{article}
\usepackage{...
- 3,109
1
vote
1
answer
582
views
Several issues regarding sidewaystable
So I have been struggling with this table, first, the caption is too long for the toprule, I cant make it say "Table x" on first line, and then the caption text on the secondline. Second, I would ...
- 111
0
votes
1
answer
1k
views
How can I modify the horizontal space that my figures can fill?
I am entering a triple-figure like so:
\documentclass[12pt]{article}
\usepackage[english]{babel}
\usepackage[autostyle, english = american]{csquotes}
\usepackage{natbib}
\usepackage{url}
\usepackage[...
- 247