Questions tagged [split]

{split} is about the use of the split environment provided by the amsmath package that allows to split and align single equations which are too long or too complicated to fit on only one line.

Filter by
Sorted by
Tagged with
1 vote
1 answer
23 views

Split doesn't work in align with multiple tab stops

I have equations in an align environment with multiple tab stops, and I'd like to use split to render just one equation number for multiple lines of equations. However, if I have more than one tab ...
user avatar
0 votes
0 answers
28 views

LaTeX - Split table over two pager (document with 2 text columns)

what do I have to change in this code to split the table over two pages? I have already tried "longtable", but it seems like it doesn't work with 2 text columns on the page. "tabularx&...
user avatar
  • 1
0 votes
1 answer
44 views

Using seqsplit and truncate together

I have a table in tabularx, and I need to put an url into one of the columns. The best and probably easiest solution for me would be to use: \truncate{200pt}{url} from the truncate package, which ...
user avatar
  • 1
0 votes
2 answers
41 views

Aligning equations with {}

I'm trying to get the two parts of the equation aligned one below the other within the curly brackets. I tried to use split+equation, align, line break, etc, but I still can't get it to look right. ...
user avatar
  • 47
4 votes
4 answers
185 views

Line-breaking (splitting) an inequality

How can I split the following inequality across three lines? \documentclass[12pt]{report} \usepackage{mathtools} \begin{document} \begin{eqnarray}\label{hhi1} \frac{1}{q-p}\int_{p}^{q}\kappa(u)du\leq ...
user avatar
1 vote
1 answer
48 views

Creating an environment with an equation & split?

Following this resource, I tried creating an environment like the following: \newenvironment{splitEq}{ \begin{equation} \begin{split} } { \end{split} \end{equation} } And using it ...
user avatar
3 votes
2 answers
180 views

Fractions in chemical equations not working

I am trying to type a Boyles equation into my latex report and everything looks fine. This is how I usually code my equations: \begin{gather} n_{CH_4}=\frac{COD}{64\frac{g}{mol}} \intertext{Where:} ...
user avatar
1 vote
1 answer
21 views

Missing delimiter error involving split and array environments

The following code works fine \documentclass[a4paper,12pt]{book} \usepackage[latin1]{inputenc} \usepackage[english]{babel} \usepackage{amsmath} \usepackage{amsthm} ...
user avatar
  • 35
0 votes
1 answer
36 views

Use whole page width for aligned formulas

How can I automatically increase the distance between the columns to use the whole horizontal space that is accessible for equations (this might not necessarily be the whole page width)? Note, that I ...
user avatar
  • 147
0 votes
1 answer
24 views

Center beamer equations and decrease the font of the equation number indication

I'm having trouble centering the presentation equations. I've used \centering, \gather among others and it doesn't want to center. \begin{equation} \centering \begin{split} \scriptstyle\phi = \frac{...
user avatar
2 votes
2 answers
49 views

splitting equation with matrices into multiple lines

I'm struggling to split an equation with matrix math into multiple lines. I've tried multline and aligned environments with no luck. It doesn't seem to handle having the matrices within this equation. ...
user avatar
  • 21
3 votes
2 answers
61 views

Arrange Equations [duplicate]

\[ \begin{split}\int_{0}^{2\pi} &f(x)\cos(nx)dx =\frac{a_0}{2}\int_{0}^{2\pi}\cos(nx)dx\\ &+a_1\boxed{\int_{0}^{2\pi}cos(x)\cos(nx)dx}+a_2 \boxed{\int_{0}^{2\pi}\cos(2x)\cos(nx)dx}+...\\ ...
user avatar
1 vote
1 answer
30 views

Two split environments have different indents

\documentclass[tikz,border=10pt]{standalone} \usepackage{amsmath} \begin{document} \begin{equation*} \begin{split} \sin(B\hat{A}M) & =2\sin(15)\sin\left(135-B\hat{A}M\right)...
user avatar
  • 159
1 vote
1 answer
32 views

Multiline equations with matrix and aligned regular equation underneath

I would like to write an equation consisting of one equation with matrices and one equation referencing the above matrices underneath (see picture). What I tried can be seen in a minimized version in ...
user avatar
3 votes
2 answers
332 views

How can I split this long equation into multiple lines?

I've looked at many different methods to split this VERY long formula into several lines but I always get an error but I can't even see where, the formula works - i think the issue is with the ...
user avatar
0 votes
0 answers
43 views

Split equations within \align

I am using the \split command within \align. Following this thread: What does a double ampersand (&&) mean in LaTeX? I am using an ampersand before each row (left alignment of the first column)...
user avatar
1 vote
1 answer
53 views

Error after using \split

i am very very new to latex and i am having problems with this peace of code. It is compiling, but it spits out dozens of errors called "Missing { inserted. \end{split}" I guess this means ...
user avatar
5 votes
3 answers
219 views

Proper nested align? Or split in align?

Say I have a short line and a split long line, both of which I wish to left-justify, while also aligning the long line at the equals sign. The following code... \documentclass[oneside,a4paper]{article}...
user avatar
1 vote
1 answer
34 views

A second glossary to be treated like acronyms

I'm writing a thesis with a lot of chemicals named, and I'd quite like them to be fully expressed when they first appear in the text, and then just as acronyms further onwards, so for instance (2-(9H-...
user avatar
1 vote
1 answer
92 views

How to split and align equations in subequation mode with fractions

How to split this system of equations? \begin{subequations} \begin{align} u_0&=\frac{c_{1,1} (c_{1,0}^4 (I_{0,1}-2 (I_{-1,0}-I_{-1,1}+I_{0,0}))+c_{1,0}^2 (c_{0,0}^2 (2 I_{-1,1}+I_{0,1})-c_{1,1}...
user avatar
0 votes
1 answer
50 views

Splitting comma separed by comma

I'm using two indexes to build a bilingual glossary. Some words have two or more equivalent in the target language, so I should separate those equivalent in the target index. For example: the word -...
user avatar
2 votes
1 answer
37 views

subequations - alignment of split environment

I want my equations to be aligned to the left by the leftmost letter, not by =. The following code aligns the equations by =. \documentclass{article} \usepackage{amsmath} \begin{document} \begin{...
user avatar
  • 413
1 vote
3 answers
76 views

Splitting a Minimization Equation into More than 2 Lines

I'm working with a particularly hairy minimization problem that I would like to split into at least three lines. Here's some sample code so you can follow me. \documentclass{article} \usepackage[long]...
user avatar
3 votes
2 answers
244 views

How to give tabs or indent to symbol representation

I need to give indent or tab to each symbol I tried \quad, \tab, \indent but doesn't work. \begin{equation} \begin{split} Where,\\ &$u_{i}=$ Horizontal displacement &$v_{\mathrm{i}}=$ Vertical ...
user avatar
  • 33
1 vote
1 answer
39 views

Automatic splitting of displayed equations using only commands in the preamble

I have a LaTeX project with one main file, and several subfiles corresponding to chapters of my textbook. One of my students is vision impaired making it necessary for me to create a special version ...
user avatar
  • 13
3 votes
3 answers
287 views

How to change the alignment in a single split environment?

New user of LaTeX here. While learning how to align equations with the equation and split environments, I asked myself how I could modify the vertical alignment in a single split expression. Here is ...
user avatar
1 vote
2 answers
66 views

A "Simple Way" to Prevent an Enumerate Item from Splitting Across Two Pages

Consider the example, \documentclass{book} \textheight=8in \usepackage{xcolor} \usepackage{pgfpages} \pgfpagesuselayout{2 on 1} \begin{document} \LARGE \thispagestyle{empty} \begin{center} \textbf{\...
user avatar
  • 4,775
0 votes
2 answers
115 views

Long matrix equation splitting

I am trying to write a long equation which includes a long matrix. I have tried many solutions (multiline, split) from the other so answers but the problem still exists. Could you help me to find out ...
user avatar
0 votes
2 answers
81 views

remove big space between equations in split environment

I am new to latex and struggling to remove big space between the equations and between equation and text. I am using \documentclass{extarticle} and the equations I am writing are big which looks like \...
user avatar
  • 105
0 votes
2 answers
38 views

Align three columns without unnecessary whitespace

I have a rather long and complicated equation that I wish to present in a nicely split manner. I wish to use what amounts to a basic structure with three columns. Line two is meant to start in column ...
user avatar
3 votes
1 answer
57 views

Splitting and aligning equation (long on both sides)

I would like to split and align an equation which is really long on both sides. \documentclass{article} \usepackage{amsmath} \begin{document} \begin{align*} & 2\sin(x - w)\sin(y - z) + 2\sin(y ...
user avatar
0 votes
1 answer
62 views

How to prevent the split environment from placing the equation number on a new line?

I have written a few long equations using the split environment, and the compiled output of one is shown in the appended screenshot. For this equation in particular, the equation number (5.4) appears ...
user avatar
  • 40
1 vote
2 answers
124 views

Image split across 2 pages

hoping someone can assist? I've referred to the link below and am struggling with trying to work out how to get a landscape image to align in the center of a book as I have some large images which I ...
user avatar
-2 votes
2 answers
68 views

split of equation in Latex

somebody help me: I have a equation as follow, but in Latex has error: \begin{equation} \begin{split} {\mathcal{F}}_{Q,{\textrm{$\omega$}}_{\mathrm{b\ }}}&=\{\{t^2(1-\frac{1}{{({\...
user avatar
  • 1
7 votes
4 answers
293 views

Understanding the alignment issues with split and phantom

As many, I have been a regular visitor of TeX StackExchange for several years. Up to now, careful research in the different existing questions and threads had solved almost all my troubles and ...
user avatar
2 votes
1 answer
36 views

How to break an equation with an alignment at a specific symbol, whilst also aligned with a system of equations

I have the following code \begin{align} K & = \frac{1}{2}\left[ \sum^{19}_{i=1}\left(I_{i,p}\dot{x}^2_{i,p} + I_{i,s}\dot{x}^2_{i,s}\right) + g^2I_{19}\dot{x}^2_{19} + \sum^{23}_{i=20}I_i\dot{x}^...
user avatar
1 vote
1 answer
53 views

`aligned` inside `align`: what's causing the ugly whitespace?

I'm trying to use aligned inside align in order to split/align an equation inside a global align. My code is: \begin{align} \vert A \vert &\leq \frac{1}{\theta^{3}} \int_{u=0}^t \left| \int_{...
user avatar
  • 23
3 votes
1 answer
54 views

Writing an Equation wirh Multiple =, -, + in Multiple Lines

I have this equation \documentclass{article} \usepackage[a4paper, total={6in, 8in}]{geometry} \usepackage[utf8]{inputenc} \usepackage{breqn} \usepackage{amsmath} \usepackage{comment} \usepackage{xfrac}...
user avatar
2 votes
2 answers
106 views

Align two equations, second split over two lines. Enclosed by leading left brace

I am attempting to reproduce an existing typeset equation. Several hours into this. I have tried every combination of align, aligned, cases, split, empheq, multline, eqnarray, that I can think of. The ...
user avatar
0 votes
1 answer
72 views

Split table cell to multiple rows based on array length and PRESERVE ORDER

I'm reading a json file and writing to table but want to split one cell of the table based on the number of values in the array..How do I achieve this inside Lua? using JSON.lua package by Jeffrey ...
user avatar
  • 37
2 votes
1 answer
43 views

Split a pdf attribute string on two lines

I have the following: \usepackage[pdftex, pdfauthor={Name Surname}, pdftitle={Title of my document}, pdfkeywords={A very long string consisting of several words}, ...
user avatar
  • 21
2 votes
2 answers
43 views

How to align multiple long equations between them and inside them

I have the following series of equations: \documentclass[a4paper,12pt]{article} \usepackage[utf8]{inputenc} \usepackage{amssymb} \usepackage{amsthm} \usepackage{mathtools} \begin{document} \begin{...
user avatar
  • 23
2 votes
1 answer
32 views

Splitting longer equation to multiple lines having various types of brackets

I have tried to type the following equation which is long and has many brackets (types and numbers). \begin{equation} \begin{split} \tau_{\xi\eta} & = \frac{1}{2}\,\frac{\left(1-\lambda\right)\,\...
user avatar
  • 333
2 votes
3 answers
118 views

Split Equation within Align and \left \right and Align New Split Equation

I am currently trying to split the last part of the below equation into three parts, but am struggling to do so. \begin{align*} \notag \mathbb{E}_{(x,y) \sim P(X,Y)}\left[(y-f(x))^2 + (f(x)-\hat{f}...
user avatar
  • 137
2 votes
2 answers
186 views

Creating split ellipse using tikz, arc

I am trying to create an ellipse (split) using tikz and arc command. Semi-major axis a = 5 Semi-minor axis b = 3 Coordinates of various points: O(0,0); A(4.797,0.846); B(0.526,2.983); C(-0.526,2.983);...
user avatar
  • 333
1 vote
1 answer
50 views

Hyphenate character inside a table

I am generating a long table that has 3 columns. The content of the table contains words that contain underscore such as "ABCD_243_SSD_FCA_SDD" and using the hyphenate package I managed to ...
user avatar
0 votes
1 answer
57 views

Multiple alignment in equation spanning multiple lines

I am messing around with some rather long equations and I can't get alignment right. The result I am looking for is this: As you can see, the equal signs are aligned. Since the second line is rather ...
user avatar
  • 403
0 votes
0 answers
104 views

Split rotated table across multiple pages BY COLUMNS

I have found multiple questions with answers how to split tables over multiple pages (using longtable and pdflandscape), but this is always splitted by rows. E.g.: Landscape-oriented table over ...
user avatar
4 votes
1 answer
142 views

Underbrace and equations: spacing between terms

In the code below, I am able to label the different terms of the equation. However, the equal, addition and subtraction signs aren't in the middle of each of the terms. Ideally, I would be able to ...
user avatar
  • 345
1 vote
1 answer
1k views

State Space representation

I am looking for a nice state space representation. Does someone know how to place text left to the equation in a split environment? What environment should be used for the explanations? \usepackage{...
user avatar
  • 13

1
2 3 4 5 6