Questions tagged [split]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
1
vote
2answers
187 views

Wick contraction in a split equation

I have a long expression over many lines for which I want to insert a few Wick contractions. To be clear each wick contraction will stay on a single line but the whole expression is many. I find that ...
5
votes
1answer
198 views

ConTeXt: Is there a way to create multi-page code listings?

I am using t-vim module and I would like to format my listings similar to figures with captions, but with the ability to spread them over multiple pages. I can see three ways to do it: Put the \...
1
vote
2answers
61 views

Splitting and flushing equations inside align

MWE \documentclass{article} \usepackage{amsmath} \begin{document} \begin{align} &f = \text{here goes a very very very very very long equation} \nonumber \\ &\hspace*{7.5cm} + \...
1
vote
3answers
89 views

Set alignment in`split`

I want to state a linear programming problem in the conventional manner. The following code \documentclass[11pt]{article} \usepackage[utf8]{inputenc} \usepackage{setspace} \usepackage{multirow} \...
2
votes
1answer
122 views

ConTeXt: Split xtables across multiple pages

Background Use extreme tables to split tabular data across pages. Problem The \setupxtable command does not appear to be sufficient to force a table to split across pages. Also, a reference to ...
3
votes
2answers
142 views

How to align negative and positive values inside an align environment?

I have the following equation inside an align and split environment but I would like to align the values of the constants below (of c_1, c_2 and c_3) even with the negative sign. \begin{align} \...
1
vote
1answer
105 views

How to split equations in subequation mode

I have the following set of equations in subequations mode and i want to split some of those long expressions to 2-3 lines: \documentclass[12pt]{report} \usepackage{amsmath} \begin{document} \...
2
votes
1answer
34 views

How to keep a uniform size of the brackets in an equation?

I am new to latex. I have to type a very long equation in my document. I try the following and it produces the long equation but I cannot produce the same size bracket. \documentclass{book} \...
5
votes
1answer
141 views

Multi-line long equation vanishes few brackets

\begin{eqnarray*} M \to {P_j}:{} & \left\{ {{{\left( {{n_1},{n_2},{{\left( {profile,{N_i},{N_i}\left( {\mathop \leftrightarrow \limits^{K_S^i} } \right){P_j},\\ & \# \left( {{N_i}\left( {\...
2
votes
2answers
161 views

How to reduce spacing in aligned equations?

I currently have the following markup to render aligned equations: \[ \begin{split} \sum_{j=1}^{n+1} j \cdot j! &= \overbrace{(n+1)!-1}^{A(n)} + (n+1) \cdot (n+1)! \\ &= ((n+1)+1) \cdot (n+1)!...
0
votes
2answers
298 views

how to split the text in the cell of table

I need to split the text in the cell. I have tried the \par but this command doesn't work inside the brackets { }. My attempt is below. \begin{table}[] \centering \caption{Caption}\label{tab2} \begin{...
2
votes
2answers
464 views

Line break within an align-environment

I want to write a long calculation with the align-environment. One of the lines is too long for one line though, so I want it to split into two lines , with the second line right-attached. Example: ...
1
vote
1answer
29 views

One big figure over three smallones in a beamer frame?

How can I put 1 big figure with 3 small evenly sized figures below it in a beamer frame? I've used subfigure for splitting but that gives even sized thangs which isn't what I'm going for ... :)
0
votes
2answers
78 views

Incompatibility between split and empheq?

I have an issue using split inside an empheq environment. When combining both environments, the alignment of the empheq is broken. Any clues ? If this is a duplicate or an obvious/known ...
1
vote
1answer
372 views

Problem with using Split inside math mode

Below code is working fine. \begin{eqnarray*} \begin{split} (U\ket{v},U\ket{w}) & = (\ket{v},\ket{w}) \\ || \ket{Uv} || & = || \ket{v} || \end{split} \end{eqnarray*} But if I define ...
0
votes
2answers
141 views

Splitting long equation in LaTeX

I am having the following equation: \begin{equation} \sum^{n}_{\stackrel{i=1}{(j,i)\in Q}} \left\{ w^{1}_{ijR}+\sum^{m=1}_{\stackrel{(m,i)\in Q}{m\neq j}} \left[ (w^{2}_{ijmR}+w^{2}_{ijm,R-1}...
1
vote
1answer
189 views

Modify a particular posterbox from tcolorbox in a sequence

Here is an example of sequence with poster in tcolorbox: \documentclass{article} \usepackage{tcolorbox} \tcbuselibrary{poster} \usepackage{lipsum} \begin{document} \begin{tcbposter}[ poster = {...
1
vote
3answers
96 views

How to split an equation through text?

\documentclass[12pt]{report} \usepackage{amsmath} \usepackage{amssymb} \usepackage{amsthm} \usepackage{tikz} \usepackage{graphicx} \usepackage{float} \usepackage{framed} \usepackage[hang,flushmargin]{...
8
votes
4answers
8k views

Writing Equation in latex

I am new to Latex. I am trying to write this equation in Latex, but I've been getting the following error: Missing $ \begin{equation} \label{tranfdc} \begin{split} T_v(s) &= \frac{V_{dc}(s)}{V_{...
2
votes
3answers
273 views

How can I nest alignment environments together and get different equations numbering for the nested alignments?

In the equation above, \Delta_{X{lm}} is taken as one equation by using split environment. I want to align the ranges shown in Eq. 1 which I already did, but I want each range to get its equation ...
0
votes
0answers
24 views

Failure of newcommand for align/split environment [duplicate]

I use the following commands for equations that extend over several lines, but only have a single label: \begin{align} \begin{split} \label{mylabel} ... \end{split} \end{align} This works fine, but ...
0
votes
1answer
51 views

wrapping long equation using square stretched bracket [duplicate]

How do we split long equation in which a command \left[ and \right] is used? My equation is as follow \begin{align} \begin{split} z &=-2Re\left[B^\ast\left(\frac{1}{2}\sum_{k=0}^{N}\alpha_k\zeta^{...
0
votes
4answers
1k views

How to deal with big equations?

I have a system of equations where the equations are big (one line isn't enough). I found this solution (the second one, from egreg How to align a set of very long equations) to manage the "how to ...
0
votes
1answer
73 views

split a long table [duplicate]

I have a table that is needed to be split since it does not fit one page. I can not manage to divide it, is there any way to accomplish this? \documentclass{article} \documentclass[a4paper,onesided,...
0
votes
1answer
153 views

Why does this error keep popping up? Missing { inserted. \end{split}

\begin{equation} \begin{split} G & =G$_x$+G$_y$ \\ & =E$_x$+$\frac{1}{2}$k$_B$T[xlnx+(1-x)ln(1-x)]\\ & + E$_y$ + k$_B$T[ylny+(1-y)ln(1-y)] \\ & =E$_x$+$\frac{1}{2}$k$_B$T[xlnx+(1-x)...
2
votes
2answers
44 views

Splitting a line to the edges

I am trying to prepare a multiple choice test sample using article documentclass. At the top of each test, I want it to write the test number and the topic of the test, but these two should be ...
7
votes
4answers
416 views

Aligning split equations to the left perfectly [duplicate]

Is there a cleaner way to align all equations to the left? The code below generates this equation: whose split-equations are not 100% aligned. \documentclass{article} \usepackage{amsmath} \...
5
votes
2answers
110 views

What's the point of `split` inside `align`?

I sometimes see people using the split environment inside the align environment. What is gained by this? After all, align can already handle multiple lines, right?
1
vote
2answers
71 views

Too much space between the last line of the splitted fraction and the fraction line

Does someone know how to remove the space between the last line and the fraction line when using \splifrc in the following code? \documentclass[12pt,a4paper]{scrartcl} \usepackage{amsmath,amssymb,...
1
vote
2answers
98 views

Problem splitting/fitting equation

I am struggling with an equation that exceeds the page, as it is very long. I have already read that the best solution is splitting the equation, so I have tried using {multline} or {split}, but I ...
0
votes
0answers
119 views

Split a long thin vertical table into 2 columns automatically

I have a long thin table that is filling a whole page. I think that splitting the table into two columns I can take advantage of the space on the page. However I'm still trying to do it automatically ...
0
votes
3answers
62 views

Split moves my equations to the left. Why?

Why does split move my equation to the left in the following code? \begin{equation*} \begin{split} \|V(\varphi)(t)-V(\psi)(t)\| & = \Big\|\int_{t_0}^t [f(s,\varphi(s))-f(s,\psi(s))]ds \Big\| \...
4
votes
2answers
282 views

How do I prevent large horizontal gaps when aligning?

The closest solution to what I'm looking for that I've been able to come up with so far is this \[ \begin{align*} A & = & B & C\\ & = & B & (D\\ & & + & E) \end{...
1
vote
2answers
46 views

Can't find the mistake of building up long equations

I'm a freshman in latex and currently is stacked by the long equation. I have the following questions: Is there a way to number the equations automatically rather than input the equation command ...
0
votes
1answer
80 views

Text centering in math mode

I wonder whether (in math mode) it is possible to split somehow what is given by following picture: The limit needs to stay centered, but the text "(P1)" is supposed to be flushed to the left.
3
votes
2answers
564 views

How can we split long equation in two or more than two lines in latex? [duplicate]

I am facing problem to split this equation in three lines. Where is the problem because whenever I run latex. It stopped and write missing }. The equation is \begin{equation}\begin{split} & A_{t}(...
2
votes
2answers
61 views

I want to split a long equation in many lines

I have a long line in equation. I want to split it properly in two or three lines. I've been using \begin{split} and \end{split}, but still it is not in good position. The equation's code is below. \...
1
vote
2answers
7k views

How to split columns into 2

I want the first row to stay normal and then every row after that should be split into 2 columns. I've done it on Microsoft word to show exactly what I want. I tried used multicolumn but couldn't get ...
1
vote
2answers
83 views

How to prettyprint a large equation with multiple split points?

I want to prettyprint a multi-line equation. My first thought was to use split inside equation, but it only supports a single insertion point. I tried align, but it right adjusts instead of left ...
-1
votes
3answers
166 views

How to left align equation? [duplicate]

I'm trying to left align the following equation so that it's on the same line as 3 (a). \begin{enumerate} \item \begin{align*} |\gamma(t)| &= [\gamma(t) \cdot \gamma(t)]^{\frac{1}{2}}\\ &=[(...
1
vote
1answer
56 views

Preventing `\intertext` from altering `split` alignment

I use the split environment for multiline equations: Unfortunately when I try to provide description of steps with \intertext (in contrast to this answer it is possible), the alignment seems to be ...
4
votes
1answer
69 views

How to deal with long equations without having to put “&” smart places in the align environment?

Does there exist an environment such that long equations behaves like this? And how do I do it without putting in & some random places in the first equation? This is the example tex code: \...
0
votes
1answer
336 views

Vertical spacing between text and equation/split

I have been trying to play around with the `inner' environments from the amsmath package (aligned, alignedat, gathered, and split) and am confused by the behaviour of the split environment with ...
1
vote
1answer
240 views

Exporting all equations from a document as individual pdf files in macOS or Linux

Usually one has a report, paper, draft, letter, etc in tex and needs to make presentations from them. Then, exporting all the equations in individual cropped nice pdf's is very useful. It's rather ...
1
vote
1answer
69 views

Optional equation break

Is it possible to have optional breaks in equations, which are automatically decided at compile time depending on whether the linewidth is sufficient or not? For instance, consider the following: \...
2
votes
1answer
67 views

How to have two successive but different alignments?

in written codes 2 equality and 2 pluses are aligned. What I want is to align 2 equality in one hand, and 3 limits on the other hand. I thought that defining another "split" before the second limit ...
1
vote
1answer
1k views

How to make long aligned equations wrap around automatically across lines and pages?

I have a list of identities as follows. \documentclass{article} \usepackage{amsmath} \begin{document} \begin{align*} \sum _{i=1}^n i&=\frac{1}{2} n (n+1) \\ \sum _{i=1}^n i^2&=\frac{1}{6} ...
2
votes
3answers
56 views

Putting variable name on the left using split and cases

Please, see the result of this code: \documentclass{article} \usepackage{mathtools} \begin{document} \begin{equation} \begin{split} X_1^{\lambda_3 n} = \\ \begin{cases*} \sqrt{(1-\...
2
votes
3answers
561 views

Insert left-aligned text in split environment (mathtools isn't allowed)

As I say, I can't use mathtools package or anything else (because my teacher at the university doesn't allow it). I'm trying to write a text (a word, 'és', what means 'and', but it is irrelevant) to ...
4
votes
4answers
2k views

Split an equation into two lines

I have four consecutive equations. The third equation needs to be split into two. I need all the equations aligned. Also, instead of having each equation numbered separately, I want only one number ...