Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [stix]

STIX is a family of Times like fonts that include a comprehensive range of mathematics glyphs and are available across a range of media.

3
votes
1answer
41 views

problem with tilde and squaring overlined symbols, stix2

I have problem with the following math text: As you can see, the tilde over S is not actually wide, but it's squared nicely. On the other hand, the overline over the X is okay, but the deuce is ...
5
votes
1answer
83 views

Wrong position of the vcentered minus sign in subscript using stix2

Is there any way to place minus sign at the same height as the horizontal bar of the plus without using raisebox? \documentclass{article} \usepackage{stix2} \begin{document} \( I_{a\vcenter{\hbox{$...
0
votes
0answers
89 views

How best to use STIX2 in a document?

I would like to typeset a document that has both mathematics and English text using the STIX/STIX2 fonts. However I am confused by the various options. First, I assume that STIX2 should be used in ...
4
votes
1answer
69 views

amsmath intlimits option doesn't work with STIX2 fonts when compiling usinf XeLaTeX or LuaLaTeX

\documentclass{minimal} \usepackage[intlimits]{amsmath} \usepackage{unicode-math} \setmathfont{STIX Two Math} \begin{document} \[ \int_{a}^{b}\qquad% doesn't work \int\displaylimits_{a}^{b}% ...
0
votes
1answer
55 views

Same font for text and math by using Stix

My tags are as follows: \documentclass{book} \RequirePackage[T1]{fontenc}% \RequirePackage{stix}% \begin{document} This is for test \textit{test} \[ \int+\alpha=a+b \] \end{document} Output ...
1
vote
1answer
72 views

Stylistic sets for the STIX (One) Fonts

I have been looking for an overview of the stylistic sets for the STIX OTF fonts, but I have only been able to find the documentation for the "LaTeX" fonts which I presume are the Type 1 fonts.
0
votes
0answers
66 views

Alternative for STIX Two Text small Optical Size?

The STIX Two Text font apparently has an effective smaller optical size (10 pt) than the original STIX (one text) or XITS. (I use 12 pt, OTF.) This gives it a "low res" look, as if it were designed ...
1
vote
1answer
132 views

How can I use STIX Two with nextxtt?

I tried to load STIX Two with fontspec, STIX Two Math with unicode-math, and load newtxtt package directly. However, it seems that the document cannot be complied properly: If I load newtxtt before ...
1
vote
0answers
50 views

Stylistic set substitution doesn't work in subscript with unicode-math

I am using TeX Live 2018 with all packages up-to-date. Minimal example: \documentclass{article} \usepackage{unicode-math} \setmathfont[StylisticSet=2]{STIX2Math.otf} \begin{document} \begin{equation}...
1
vote
1answer
84 views

Delimiter in different math font

Good day, Here we are using STIXMath-Regular for math font as per customer requirement, in STIXmath-Regular font over brace is clash with text, for alternate we plan to use STIXMathTwo font for over ...
1
vote
1answer
53 views

STIX Two font: \emph inside italic text not working as expected

I have found that using the STIX Two font, the command \emph inside an italic text is not working. % STIX Two font \usepackage[math-style=ISO]{unicode-math} \usepackage{xltxtra} \setmainfont{...
3
votes
1answer
107 views

Problem with the placement of limits of integration in stix2

There seems to be a problem in placement of limits in the stix2 package. The limits are placed too far from the integral sign. Here is a MWE. \documentclass{article} \usepackage{stix2} \begin{...
8
votes
1answer
512 views

Problem with stix fonts in texlive 2018

I have been using stix fonts with texlive 2017. Now I am getting weird error messages. Here is a minimum working example: \documentclass{book} \usepackage{amsmath} \usepackage{amssymb} \usepackage{...
0
votes
0answers
491 views

How to install the new stix2 package? [duplicate]

The stix2 package has been released recently: https://ctan.org/pkg/stix2-type1?lang=en In the documentation it is said that to be able to use it, one just needs to add \usepackage{stix2}. However, ...
0
votes
1answer
302 views

stix and stix2 fonts

Support for type-1 version of stix2 fonts just came out. I think it is a quite nice font. However it seems that for stix2 fewer math alphabets are available than for stix (old version) For instance: ...
2
votes
1answer
238 views

open type math font STIX letters are very close to each others in some places

I was trying some fonts from this post which-opentype-math-fonts-are-available I downloaded and installed STIX two From http://stixfonts.org/ and have been using it for few days. It looks really ...
17
votes
1answer
172 views

Why is a subscript set in roman font placed differently

Consider the following MWE: \documentclass{article} \RequirePackage{fontspec,unicode-math} \setmainfont{STIX Two Text} \setmathfont{STIX Two Math} \begin{document} \showboxbreadth\maxdimen \...
0
votes
0answers
101 views

STIX math cannot be found

Good day! Here we are using TeXLive system for LaTeX. We created common server for TeXLive for all users. If I compile through server TeXLive I got a error "STIX Math" cannot be found. If I ...
2
votes
0answers
108 views

stix package in nomath mode

I have a big physics book typed in latex with standard fonts, including many math font packages (bm, double strike, ams, etc.). The manuscript has been checked carefully by several readers. The ...
1
vote
1answer
112 views

How to get bold with italic in math by using STIX package

My code as follows: \documentclass{book} \usepackage{amsmath} \usepackage{xltxtra} \usepackage{xunicode} \usepackage{fontspec} \defaultfontfeatures{Ligatures=TeX} \usepackage{unicode-math}% \...
1
vote
0answers
148 views

Bold fonts not working in heppennames with STIX 2.0 [closed]

Can't get bold versions of fonts for the particle naming package to appear. mwe below. A bit long, to show the permutations. \documentclass{article} \usepackage{multicol,color,heppennames} \...
2
votes
1answer
83 views

Incorrect Responsiveness of \overleftrightarrow using STIX 2.0 Fonts

I'm trying to use STIX 2.0 fonts and typeset a file using lualatex. I faced an issue on the \overleftrightarrow as it is not responsive correctly. This is the code I use: \documentclass{article} \...
1
vote
1answer
61 views

Strange behaviour in importing symbols from stix package

I was importing symbols from the stix package (brackets in particular) following the directives given here on tex.stackexchange when something really strange happend, which I presume has to deal with ...
2
votes
1answer
109 views

Inconsistent positioning of subscripts with STIX2Math

Using STIX2Math via XeLaTeX, the positioning of subscripts in inline math is different depending on whether said inline math appears in the main text or, for instance, in a footnote. The following TeX ...
0
votes
1answer
81 views

Importing blackboard wedge symbol from `stix` or `boisik` [duplicate]

I would like to use this blackboard wedge symbol without switching my current math font. I have found the symbol in both the stix and biotik package. I have also found numerous questions and answers ...
1
vote
1answer
91 views

Spacing between bars in textstyle fractions--issue with STIX2 or OpenType Math specification

Given the following code: \documentclass{article} \usepackage{unicode-math} \setmathfont{STIX2Math.otf} \begin{document} \[ \frac12\textstyle\frac12 \] \end{document} Using LuaLaTeX version 1.0....
5
votes
1answer
125 views

How to make persistent changes to math parameters

I find that inline fractions with the Stix Two fonts are a bit too tall, pushing the baselines apart. So I want to shrink them down a little. In principle, I know how; see below. The problem is that ...
7
votes
1answer
1k views

`\big\lVert` is too big

The symbol \big\lVert is as big as \Big\lVert with the Stix Two fonts. Is this a bug in the font itself, and is there a suitable workaround? MWE (run in lualatex): \documentclass{minimal} \...
3
votes
0answers
48 views

Get only lambda from stix Package [duplicate]

I am trying to use the (lowercase) lambda from the stix package without using the rest of stix. There is this question: How to get only one symbol from a symbol package?. But I do not know how to get ...
3
votes
1answer
140 views

left( \right) problem with Stix Math Two when \small applied to the group (Lualatex)

Consider the following MWE: \documentclass[12pt]{article} \usepackage{unicode-math} \setmathfont{STIX2Math.otf} \begin{document} {\small Small size \[ \left(\frac{a}{b}\right) \left(\frac{\...
2
votes
1answer
395 views

stix2 FONT: bold greek

I installed STIX2 fonts in otf format on my Win10 machine. I tried: \documentclass{minimal} \usepackage{bm} \usepackage{fontspec} \usepackage{unicode-math} \setmainfont{STIX2Text-Regular.otf} \...
1
vote
1answer
149 views

\operatorname produces ∓ instead of a hyphen

If I compile \documentclass{article} \usepackage{stix} \usepackage{amsmath} \begin{document} $\operatorname{some-operator}$ \end{document} then I get the output some∓operator How do I address ...
3
votes
1answer
61 views

Braces of stix package into another package

\documentclass[12pt]{article} \usepackage{amsmath,amssymb} \DeclareFontEncoding{LS2}{}{\noaccents@} \DeclareFontSubstitution{LS2}{stix}{m}{n} \DeclareSymbolFont{xlargesymbols}{LS2}{...
2
votes
3answers
187 views

shadow in bold characters when using stix package

I'm trying to typeset the symbols within a pseudo-code using the stix package. I tried with \boldsymbol but this didn't get the characters bold. I managed to get the characters in bold using the bm ...
2
votes
1answer
319 views

stix package mixes fonts

I'm trying to make my article figures compatible to the font of the journal, which uses the stix package. To that end I use the standalone package. The problem is that with one set of options I get ...
2
votes
0answers
403 views

Stix package doesn't work even in simple examples

I have been trying to get some of the symbols from the stix package to work, but for some reason I get errors even in simple toy examples, where there obviously cannot be any clashes with other ...
3
votes
0answers
157 views

unicode-math with XeLaTeX \left( and \right) not rendered correctly

I'm using XeLaTeX (XeTeX 3.14159265-2.6-0.99992 (TeX Live 2015)) on OS X Sierra, compiling to a PDF through rubber \documentclass[letterpaper, 11pt]{article} \usepackage{geometry} \usepackage{amsmath}...
2
votes
1answer
66 views

Import \mathbbit{q} from stix

I am trying to import the following symbol \mathbbit{q} from stix library, see the following code, please: \documentclass{article} \usepackage{amsmath} \DeclareFontEncoding{LS1}{}{} \...
1
vote
1answer
1k views

Correct diameter symbol needed without stix package (pdflatex)

I have drawn a custom diameter symbol in TikZ and now I need the correct unicode glyph (U+2300 ⌀) in my document (pdftex) to provide the right copy-paste text in the pdf. I've found that the \diameter ...
5
votes
2answers
517 views

Behavior of \mathcal and \mathscr in STIX 2.0.0

I recently installed STIX 2.0.0 and remarked that \mathcal and \mathscr give the same result (calligraphic letters). A minimal example: \documentclass{article} \usepackage{fontspec} \usepackage{...
6
votes
1answer
618 views

How can I use the upright integral symbol of Stix Two Math font?

Is there a way to use the upright integral symbol from the recently released Stix Two Math font? Probably a solution, if there is one, would require the package unicode-math and xelatex or lualatex. ...
6
votes
1answer
853 views

Sans and monospace font match for STIX Two

I am writing my PhD thesis using LuaLaTeX and unicode-math, and I would like to use some font different from Computer/Latin Modern, at least for the printed version. It is a thesis in theoretical ...
5
votes
1answer
991 views

Using the stix font for \mathcal and \mathscr only

How do I limit the stix font package to only affect certain symbols? In my case I want to only change the font associated to \mathcal{} and \mathscr{}.
1
vote
1answer
568 views

Problem With stix Package

I start using stix package for mathematics arrows , and I get this error along with others which are very similar -Too many symbol fonts declared. ...ont{arrows2} {LS1}{stixsf} {m}{it} - ...
3
votes
2answers
418 views

Inconsistent script sizes with STIX Two and unicode-math

With unicode-math, it is recommended to use \symup to get upright symbols in math-mode, and to use \textnormal to get upright text, e.g. for text label subscripts. When using the STIX Two fonts, these ...
6
votes
1answer
1k views

“! LaTeX Error: Too many symbol fonts declared.” error!

I am trying to use stix font in beamer class: \documentclass[standalone]{beamer} \usepackage{tkz-euclide,tikz,stix} \begin{document} \begin{frame} \begin{tikzpicture} \coordinate [label =above:$C$](...
2
votes
1answer
2k views

Using stix fonts with pdfLaTeX: “Option clash for package textcomp.”

This is a follow-up question for Is it already possible to use the STIX fonts? I would like to use stix font in my thesis. I am using pdflatex with MiKTeX (probably the latest version). My question ...
6
votes
1answer
450 views

Bold italic \varkappa in STIX 2

While testing the STIX 2.0 fonts with unicode-math, I got a very strange \varkappa in bold italic font. Here it is a quick example: \documentclass{article} %\usepackage{luaotfload} %% only active ...
5
votes
1answer
127 views

import only \mathvisiblespace from stix without importing the whole stix

Continuing How to use only selected math symbols of the STIX fonts?, how to import the normal symbol \mathvisiblespace from stix (or from some other suitable font)? The following attempt gives a ...
8
votes
2answers
1k views

STIX 2.0 font declaration

Today the STIX v2.0 was released. What is the proper font declaration to make use of various optical sizes etc with unicode-math?