Questions tagged [subfloats]
{subfloats} is about small "sub"-figures and "sub"-tables within a single (floating) figure or table environment. For questions specifically about formatting a subfloat's caption, consider to use {subcaption}.
1,952
questions
0
votes
0
answers
18
views
Need to get the table(Cont.) in caption of table that spans across mutiple pages
I need to get the Table(number)(Cont.), in the caption of a table that spans across more than one page. I tried using the \continuedfloat but I am only getting the table(number) and not the (Cont.) ...
- 11
1
vote
2
answers
38
views
Regarding numbering of subfigure on the top left
I have included the following latex code in my paper which gives the numbering of the subfigure at the bottom center.
\begin{figure}[ht!]%\vspace*{3.0ex}
\centering
\subfigure[]
{\...
- 11
0
votes
0
answers
18
views
Continuous numbering of single figures and figure with subfigures
Similar to the question "Continuous subfigure numbering", but slightly different: I have an article with multiple figures, some of which have subfigures.
Firstly, I would like every image (i....
- 113
0
votes
1
answer
35
views
overlaying graphs in subfigure
Why do the graphs overlap each other? How to fix this? And there is also a space at the top, but there is no corresponding command in my code
\documentclass[a4paper, 12pt]{article}
\usepackage{...
1
vote
1
answer
38
views
big gap and subfigure doesn't work correctly?
For some reason, when I run the code, there is a huge space at the top, and also set the width to 0.2 so that there are 5 pictures in a line, but there are 3. Why?
\documentclass[a4paper, 12pt]{...
3
votes
2
answers
178
views
How to move the color blocks into the red frame region marked?
I'd like to use the area below the two first subfigures to place the color blocks, how can I achieve this effect?
The mwe is following
\documentclass[aspectratio=2013]{beamer}
\usepackage{tikz,...
- 604
3
votes
2
answers
72
views
Arrange subfigures in 2x2 + 1 centered shape
I'd like to arrange my 5 subfigures like this, where each column is the same width. It must compile with LuaLaTex.
Basically there is a 2x2 matrix occupying the two left columns and two rows, and a ...
- 505
0
votes
1
answer
46
views
The listings package and side-by-side code listings
I'm using the listings package liberally in an article. However, I
want to show some code listings side-by-side and for those i use the
subfigure package:
\begin{figure*}
\begin{subfigure}{0.49\...
0
votes
1
answer
26
views
Adding sub caption under an aligned figure
Is there any way to align vertically the figure on the right in the middle of the figure on the left AND add a sub-caption to fill the blank space below the figure on the right ?
Thank you in advance ...
- 860
0
votes
1
answer
24
views
Caption of \subcaptionbox environment not correctly centered [duplicate]
I am using \subcaptionbox{} to setup a figure containing multiple subfigures. I want to refer to each subfigure in the text, so each subfigure needs a caption. I want to have empty captions, meaning ...
- 3
3
votes
1
answer
55
views
Is it possible to add images in this format using subcaption?
I understand how to add images in a (2 X 2) or a (m X n) grid in latex using subcaption, but is it possible to add images in this manner using subcaption?
If not possible, then is there some other ...
- 181
0
votes
0
answers
18
views
What to do when we use subfig and the images occupy more than one page?
I'm writing my thesis and I have a group of images, but the image group takes up more than one page. How do I ensure that the subfig continues on the next page with the correct figure count?
\begin{...
0
votes
1
answer
20
views
automatically label subfigure overlapping top left
I have a set of subfigures that I want to label like (a) but without any real caption,
and I want to place the labels (a) on top of the graphic,
in the top-left corner to save vertical space.
I want ...
- 2,859
1
vote
0
answers
11
views
A figure I placed using subfloat has a mismatching number in the text when compared to the caption of the figure [duplicate]
I have a document with a figure comprising two images. I placed the image using subfloat. The hyperlink to the image gives me a spurious figure number. So, the figure is labelled Figure 5 by the ...
- 96
0
votes
0
answers
17
views
Need to make subfigures appear on separate pages [duplicate]
I am a beginner. I need to make some subfigures appear on one page and some on another. There are basically 6 subfigures and they all occupy a single page, leaving a lot of empty page on a previous ...
- 11
2
votes
1
answer
52
views
error on images inserted in one column
I have a two column layout. I want insert two images as subfigures align next to each other, spanning one column.
How to solve this error?
Overfull \hbox (247.6778pt too wide) in paragraph at lines 79-...
- 183
2
votes
2
answers
57
views
Subfigure customization
I have the following code to display multiple images:
\begin{figure}[H]
\centering
\begin{subfigure}[h]{0.35\textwidth}
\centering
\includegraphics[width=\textwidth]{real_time1....
- 21
1
vote
1
answer
41
views
complete beginner, need help with figures
i am a complete beginner. i don't know much about latex. i need help with positioning images. basically, there's 6 figures and i want them to be subfigures, where two each are side by side. i am ...
- 13
1
vote
0
answers
23
views
Side by side instead of Top Down Picture Position [duplicate]
I write latex with IEEEtrans with TexLive version 2022.
I would like to arrange these two pictures side by side (left and right) instead of top and down picture position.
Here is the code for top and ...
- 371
0
votes
0
answers
48
views
How to overlay figure caption on a image in overleaf latex?
I am using Overleaf latex. I have an input image that I cannot change/reorganize. I need to use this image to create a figure. The image itself is full page high. The left bottom of the space has ...
- 960
0
votes
1
answer
65
views
span a figure over two/multiple pages
I have a large figure in terms of hight dimension which I would like to add to the Appendix of my work in LaTex. Is there a way to have such figure spanning over pages without needing to resort to \...
- 399
1
vote
1
answer
27
views
How can I adjust the distance between captions and subcaptions using subfloat?
For the following code I get the result in the image. How can I adjust the distance between the image and its captions ?
\begin{figure}[ht]
\subfloat[Sinal na $f_c$.]{
\begin{minipage}[c][1\width]{
...
0
votes
0
answers
23
views
Incorrect appearance of the subfigures
I am using below code to include 3 different images in the same figure. However, the caption for each subfigure is with format "Figure 7.2: Gráfico del estado OFF" instead of "a)Gráfico ...
0
votes
0
answers
25
views
How can I replace the semicolon with a full stop after the 'Figure' index?
I'm editing an overleaf paper draft following the general formats defined in the IEEE access template. The color of the overall figure indexes complies with the IEEE access template now, but the ...
1
vote
1
answer
48
views
reference to a specific part of a subfigure in text
Hi there I was working on a subfigure and since it's part of a pipeline I wanted to have something in my main text saying: ... (Figure 4, top right) ... (Figure 4, middle) ... (Figure 4, bottom).
Now, ...
- 399
0
votes
0
answers
64
views
Aligning figures in subfigure environment
I would like to know, how is it possible to correctly align all figures below without passing through a vectorial processing software. Is it possible in LaTex ? I am working with subfiguresbut didn't ...
- 860
0
votes
3
answers
184
views
Automatically Cropping Images to Match Aspect Ratios in Side-by-Side Figures in LaTeX
I'm working on a document in LaTeX where I need to place two images side-by-side. These images come with different aspect ratios, and I am looking for a way to automatically crop them to appear with ...
- 1,005
0
votes
1
answer
48
views
How to edit the title of picture?
I write latex with IEEEtrans with TexLive version 2022
I would like to have the following format:
a. There is only (a) and (b) on each respective figure.
b. Title of Figure consists of the general ...
- 371
1
vote
2
answers
48
views
Issue with subfigure split across multiple pages
I have 4 subfigures that I want to be presented across two pages, with 2 on each page. (Each set of two subfigs is large enough to take the entire page).
I followed the suggestions here: Split ...
- 61
0
votes
1
answer
49
views
Subfigure captions alignment
I have used the subfigures package but there is a slight misalignment between my two captions. The figures however are aligned and of identical size. Would anyone know how I can solve this ?
\...
- 65
1
vote
2
answers
218
views
Creating a Common Legend for Subfigures with subcaption Package in LaTeX
I'm working on a LaTeX template, the elsarticle class from Elsivier, where I have two subfigures created using the subcaption package. I came across this answer which provides a solution for having a ...
- 135
0
votes
1
answer
22
views
How to input pictures with subfloat in IEEE latex
I write latex with IEEEtrans with TexLive version 2022.
I would like to input two pictures where Picture A is at the top and Picture B is at the bottom as follows.
Here is the latex code:
\...
- 371
0
votes
0
answers
38
views
Place subfigure caption top left in revtex4-2 template
I would like to place the subfigure captions at the top left of the images. There are a ton of questions like this here but they all use the subcaption package, which I don't want to do since my ...
- 373
0
votes
0
answers
13
views
Customizing reference styles of sub-tables in LaTeX
I create and reference to some sub-tables. The following show a minimum example.
\documentclass{IEEEtran}
\usepackage{subcaption}
\begin{document}
\begin{table}
\caption{Table}
\...
- 365
0
votes
0
answers
27
views
How to fix misaligned subfigures with subcaptions
I have two subfigures where the right one is vertically above the left one. I am not sure how to fix this. Here is the code I have:
\documentclass[12pt]{article}
\usepackage[margin=1in]{geometry}% ...
- 281
0
votes
1
answer
61
views
Using figure* moves image to a new page in a 2-column document. Is there a way to prevent it? [duplicate]
I am using \begin{figure*}[H] since I want my figure to span to the whole page width while on double column page but it is causing the figure to move to a new page (despite using [H] to place the ...
- 101
0
votes
1
answer
160
views
Figures in Two columns
I'm using overleaf. It's two column and I need 6 figures comes one by one. two figures in column 1 and another 4 in column 2.
1
vote
3
answers
309
views
How to use \autoref to refer to a subfigure
Let's say I have a figure that actually has two subfigures (but composited into a single file), is there a way that I could get autoref to output "Figure 1A" and "Figure 1B"?
What ...
- 120
0
votes
2
answers
74
views
Warning errors for floats and subfloats in my main document
I found this piece of script to place three images all on top of each other
\documentclass[preprint,12pt,review]{elsarticle}
\usepackage{multicol, blindtext}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \...
- 96
0
votes
2
answers
88
views
TikZ-subfigures are not horizontally aligned
I have tried to align two tikz-subfigures. For for some reason though it doesn't work completely and they are misaligned horizontally as per this screenshot.
What am I doing wrong here?
\documentclass[...
- 123
0
votes
1
answer
117
views
Scope command problem
I have a latex document in which I have drawn a figure with two tikzpictures, I need to place the two tikzpictures in specific locations. for this I used the "scope" command with "shift=...
- 433
1
vote
0
answers
58
views
tikz code compilation errors between different texlive version
As part of book that I'm working on, one chapter has several drawings that were drawn in tikz some 8 years back. Many people in this forum helped with that effort including Gonzalo Medina
I am now ...
- 229
1
vote
1
answer
161
views
Trying to put images side by side with \begin{subfigure} but it's not working
I'm trying to put two images beside each other using subfigure but they keep compiling on top of one another. On top of that, it's putting a "0.5" below each image and I'm not sure why. I ...
- 11
1
vote
1
answer
111
views
How can I vertically align four different sized subfigures and their respective captions?
I want to have a Figure out of 4 different sized subfigures in one line. The subfigures should be centered vertically and the captions should be at the same height.
I tried with and without [c] after \...
- 11
0
votes
0
answers
26
views
Composition of multiple figures [duplicate]
I'm trying to compose multiple figure into a singular figure block. I would like to obtain something like what in the picture.
- 163
2
votes
2
answers
86
views
Align last subfigure on the left side
I have 5 pictures and want to align them that three pictures are on the left side above each other and two on the right side.
I have tried it like this
\begin{figure}
\centering
\begin{subfigure}[h]{....
- 23
1
vote
2
answers
122
views
Including two separate figures in latex as a subplot
I have two separate figures in tex file: fig1.tex and fig2.tex
for example
\begin{figure}[t]
\begin{tikzpicture}
.
.
.
\end{tikzpicture}
\caption{caption}
\label{fig1}
\end{figure}
I use \input{fig1....
0
votes
3
answers
180
views
How to make two tikzpicture's appear one same row
\documentclass{article}
\usepackage{tikz}
\usepackage{caption}
\usepackage{subcaption}
\begin{document}
\begin{figure}
\centering
\begin{subfigure}[b]{0.3\textwidth}
\begin{tikzpicture}
\draw[...
- 103
3
votes
1
answer
66
views
Subfloat figure arrangment
I'm trying to achieve the following figure layout using \subfloat but without any success. That is to have one figure one the left side of the page, and other two on the right side, aligned, and as ...
- 133
0
votes
2
answers
68
views
Just cannot get the tikz scaling right in a subfigure environment
I understand how to scale a single tikz picture either by \begin{tikzpicture}[scale = ] or \resizebox or \scalebox. However, this seems to collapse once I put them into a subfigure environment. This ...
