Questions tagged [subsection]
The subsection tag has no usage guidance.
78
questions
1
vote
2
answers
76
views
How to get a dotted rule below every subsection title in scrartcl?
I am currently doing the following in order to obtain a rule below each section title in a KOMA Article.
\documentclass[]{scrartcl}
% RULE BELOW SECTION TITLES
\makeatletter
\renewcommand{\...
1
vote
1
answer
37
views
Make subsection and its content unbreackable
I'm writying a book in latex and faced a problem linked to the subsection content breacking.
I know, I have to show some minimal example, but it's very copmlicated to do it (but I will try a bit ...
0
votes
0
answers
19
views
misalagnied subsubsection in \localtableofcontent
I am writing a long document with depth 4. in the table of content I could make a clean alignment for the sections:
However when using \localtableofcontents, I wanted to have the combination of the \...
0
votes
2
answers
40
views
How I can put roman numbers in a subsubsection title?
I have this code:
\subsubsection{subsubsection}
in this subsubsection I have one text
\subsubsection{subsubsection||}
Plus text in this subsubsection
But when i pu the || (2 in roman numbers) my ...
0
votes
1
answer
33
views
How to define the chapter, section, paragraph with a custom numeration and normal-sized, bold embedded headings?
I have to write a seminar paper. It should have the following outline view:
A. (Big letters)
I. (Roman)
(Arabic)
a) (small letters with ")")
aa) (double small letters with ")")
(...
1
vote
1
answer
56
views
Section and subsection formatting
I am using this academic CV template from Overleaf: https://www.overleaf.com/latex/examples/academic-cv-template/hvjpfjnyggbf. Please, consider that template as the MWE.
I want to modify the \...
1
vote
1
answer
36
views
Lonely section headline at bottom of page
Dear LaTeX enthusiasts,
I have been trying to deal with a problem for days and I fear, it will still take me days if not months to find an answer myself -- if I ever find one at all. So I would very ...
1
vote
1
answer
53
views
Customization of sections and subsections in a metropolis Beamer presentation
I have been working on a slide presentation with beamer. Thanks to this question I have the following code which generates slides that have a header with the section and the subsection as
\...
1
vote
1
answer
36
views
Numbering theorem-like counters whitin each section, subsection and subsubsection independently [duplicate]
I'm trying to enumerate the different theorem-like counters within each sections independently. I'm using the code I found on this link. However, theorems, lemmas, and definitions are not numbered in ...
0
votes
0
answers
31
views
Page breaks after the introduction section and \nopagebreak doesn't work
So I want the section to start right after the introduction paragraph, but it starts a new page.
Note: I am new to this so I am not sure if I should include more than this to know what the problem is.
...
0
votes
1
answer
24
views
Make a subsection appear in the toc without a subsection existing
I have a section and within it several tables. Each one on a page. I intend that in the toc, the name of each one of these tables appears as if it were a subsection.
I have tried the following command ...
1
vote
2
answers
60
views
how to write sections 3.1 , 3.2 instead of 0.3.1 or 0.3.2 [closed]
Im writing my thesis and I have a thesis writing guide from my university but when ı compile it the sections shown as 0.1 ,0.2 and the subsections as 0.1.2 etc. . I dont want it to look like that , ...
0
votes
1
answer
126
views
IEEE access template tcolorbox problem
I am trying to highlight some sections in an IEEE access template. So I added packages:
\usepackage[most]{tcolorbox}
\newtcolorbox{highlighted}{colback=yellow,coltext=black,breakable}
when I have ...
0
votes
1
answer
95
views
Cannot display \textsuperscript and trademark symbol on subsection title [duplicate]
This is what I have:, source: How to typeset subscript in usual text mode?.
\subsection{Code from Moral Kombat\texorpdfstring{\textsuperscript{\texttrademark}{Code from Moral Kombat\texttrademark}}}
...
1
vote
0
answers
32
views
Breaking a subsection title
I am trying to break a subsection title using \\
It was working before, but now for some reason, it is not working at all! I have done lots of edits and formatting adjustments to the whole document. I ...
1
vote
1
answer
60
views
Beamer cambridgeUS section and subsection not enough space
I'm writing a latex Beamer file, and I got some problems when setting the section & subsection. The space is not enough to display my text. I want to increase the scope to include the text, rather ...
1
vote
1
answer
72
views
How to remove beamer section buttons in CambridgeUS
I want more space to write sentences, so I need to delete the link button of the sections (black box). However, I need to keep the section title, only delete the black box area. How can I do this? ...
1
vote
1
answer
164
views
! LaTeX Error: Something's wrong--perhaps a missing \item. - when adding a \textbf
I downloaded a C template and I'm using it to write my CV. In the "working experience" section, I decided to add a bold line using \textbf to categorise experience under the relevant ...
0
votes
2
answers
27
views
How to create a custom subsection (with regular font size, bold letter, don't start a new line)
I'd like to create a custom subsection that satisfies the followings:
Bold letter
The font size is the same as that of the paragraphs.
Indent before the title
Do not start a new line after the title.
1
vote
1
answer
38
views
Delete automatic generated section- and subsectionslides in Beamer
I'm using the focus-beamer-theme and whenever I start a new section or subsection, it automatically inserts a slides with the title of the new section on it. Is there a way to delete these pages / not ...
0
votes
1
answer
32
views
SOLVED: Include (Sub-)Sectionnumber in pdf bookmark
I am writing my homework in latex just for fun and get better at it.
Where my sections are exercises and my subsections I want to be parts of the exercise.
The format for subsection should be SecNum.\...
2
votes
1
answer
82
views
Reducing the Amount of Vertical Space Between the Lines of a TOC Subsection Entry
Consider the code
\documentclass[12pt]{book}
\usepackage[showframe,paperwidth=5.5in,paperheight=8.25in]{geometry}
\textwidth=4in
\textheight=6.40in
\voffset -7pt
\usepackage{tocloft}
\renewcommand{\...
0
votes
0
answers
30
views
Picture does not stay under my section in Latex on the same page [duplicate]
I'm very new to Latex and this is my first document in it. Can someone please guide as to how I can bring the figure under my Results heading. I've tried implementing [H] and \userpackage{float} as ...
1
vote
1
answer
34
views
Why does this titlesec code amending subsection give an error on section?
CORRECTED based on comment from Carlisle below.
I want to change the subsection header so that is has no indent. I thought this code would do it but when I compile I get undefined control sequence @...
0
votes
1
answer
226
views
Beamer referencing parts, chapters, sections, and subsections
I try to reference correctly part, chapter, section, and subsection in a beamer presentation.
The code is:
\documentclass[envcountsect,10pt]{beamer}
\usepackage{chngcntr,xcolor,bbm,placeins,float,...
0
votes
1
answer
40
views
Move subsection to next page if its own floats subsection do not fit on the page
I am trying to move a subsection to the next page if the complete subsection (title, the text and the floats) do not fit on the same page.
I don't want the figure to appear before the text.
I tried ...
0
votes
1
answer
30
views
My counter for subsections starts with 3, but then increases by 3 each time, and i need it to increase by 1
My counter for subsections starts with 3, but then increases by 3 each time, and i need it to increase by 1
I can see where is the error, but i cant find the other way to start the counter with 3
\...
1
vote
1
answer
227
views
Make section, subsection and subsubsection begin on the left of page and on the same level
I need to make all the section levels to begin at the same position on the left of the page. I need something like this
1 Introduction
1.1 Subsection Heading Here
1.1.1 Subsubsection heading here
I ...
3
votes
1
answer
87
views
In TOC: How to hide numbering of \section in \subsection?
Does anyone know how I can make it so that no numbering of the parent heading appears in the table listing?
Output of my current minimal example
I
I.1
I.2
I.3
I.4
I.4.1
I.4.2
II
But i want ...
1
vote
2
answers
33
views
Customize distance number \subsection
Good morning.
I would like to add a 2cm space between the section number and the string, but the newcommand \renewcommand{\thesubsection}{\hspace{2cm}} does not work.
And everything disappears on me. ...
1
vote
0
answers
25
views
Distance Number and Subsection
Good morning, everyone.
I am recently attending Latex and would like to know how to customize the distance between the number and the voice within \subsection.
Thank you very much.
This is my code.
\...
2
votes
1
answer
228
views
Section and sub-section command or referencing doesn't work in overleaf document
I cannot refer to a section or subsection in the main text of my overleaf document using this command:
Section~\label{sec:X}
I am sharing the code of the document below and it gives the following ...
2
votes
1
answer
184
views
Subsubsection numbers go missing
When I set the subsubsection so that the text runs on from the heading, the subsubsection numbers don't appear. Adding the command to number to depth 3 doesn't help. Is there anything I can do other ...
0
votes
1
answer
34
views
Aligning Subsections
\section*{Part 1}
\subsection*{1)}
\subsubsection*{a.}
It looks like this, how can I allign subsections properly according to their rank?
0
votes
2
answers
37
views
Picture from another subsection appears in another
Im trying to put my pictures accordingly to the content of my subsection but until one part where i had a figure in 2.1 subsection appears after the content as i want but my 2.2 subsection figures pop ...
3
votes
2
answers
953
views
formatting of sections and subsections
I am new to latex and I want the following formatting style for section and subsections and subsubsections
I am using following code for section. There is a dot missing after Roman number in output. ...
0
votes
1
answer
68
views
Continuous subsection
In Latex pls
hello I need the sections and subsections to look like this:
I. first section
1. first subsection
2. second subsection
II. second section
3. third subsection
also I need that ...
1
vote
1
answer
124
views
Headers sections and subsections
I would like to put in the headers the section in the left header of odd (right-side) pages, and the subsection in the right header of even (left-side) pages (unless there is no subsection in which ...
0
votes
1
answer
63
views
How to hide beamer subsections from the table of contents for non highlighted sections only
This question has been asked several times but not in the same context as mine.
I have a beamer presentation with an initial table of contents frame for which I hide the subsections with the following ...
2
votes
2
answers
73
views
Wrong hyphenation of long subsection titles in the toc and the title itself
It seems that Latex has a problem with the correct hyphenation of very long, one word (sub-)section titles in the title itself and the toc.
With the following MWE:
\documentclass[12pt]{scrartcl}
\...
2
votes
0
answers
36
views
Linebreaks in the names of subsections in the table of contents
I’m dealing with the following problem. The name of a subsection in my book is too long and it could not fit in the TOC. Could anyone suggest the solution to insert a line-break in TOK?
That is the ...
0
votes
1
answer
34
views
Indent inside section, subsection and subsubsection long titles as this: remove the space below the ([sub]sub)section number & make the text fit below
How to shift the text towards the spaces (colored in redish) from the section, subsection and subsubsection titles? (Not my style, I should reproduce a Word-like document with that format, and I don't ...
1
vote
1
answer
72
views
Why is there a double point between section and subsection?
I have defined the following box:
\documentclass[a4paper,14pt,twoside,reqno]{extbook}
\usepackage[tmargin=28mm,bmargin=28mm,lmargin=28mm,rmargin=28mm]{geometry}
\usepackage{amsmath, amsfonts,...
0
votes
1
answer
125
views
Changing subsection label in the ToC
I'm going to apply this: How to hide/show section levels in the table of contents? but I also want to not show the numbering in the subsection label. For example, in the next picture I want the ...
8
votes
1
answer
386
views
How can I write subsection headings involving constants (a, b, c, d, etc) in a LaTeX document?
I am working on a research paper using LaTeX for an IEEE journal, and this paper involves some constants (say, a, b, c and d). When I write subsection headings involving these constants, for example..
...
0
votes
1
answer
323
views
is it possible to add more subsections like 1.2.3.4.5.6.7 in LaTeX? [duplicate]
Is it possible to add extra subsections?
example) \subsubsubsubsubsection
0
votes
0
answers
194
views
Problem with no numbering \subsection*{} - getting "Missing number, treated as zero" error
I have the following subsection within my latex in overleaf:
\subsection*{\textbf{Musical Notations}}
The * sign is added in order to avoid numbering of this subsection as offered in the overleaf ...
0
votes
1
answer
259
views
Getting the error "Something's wrong--perhaps a missing \item. ...}<section title>}{1}{section.1}". What should I do?
I am new to LateX and have started to like it very much. I have a document which on compilation gives the error as stated in the question. I am working with TexStudio and when I click on the error ...
0
votes
1
answer
103
views
How to get a indented subsubsection with a run-in title?
I've tried the follwing:
\usepackage{titlesec}
\titleformat{\subsubsection}[runin]{\bfseries}{\thesubsubsection}{1em}{}
But if I do \titleformat{\subsubsection}[runin]{\hspace{3em}\bfseries}{\...
2
votes
1
answer
158
views
Beamer Miniframes and subsections in Singapore
I am using the Singapore theme with subsections=true.
Everything is OK with the position of both sections and navigation dots.
However, I would like the subsection title to appear below its ...