Questions tagged [supertabular]
provides the supertabular environment, which is an extension of the normal tabular environment.
115
questions
3
votes
1
answer
84
views
Problems with long tables
I want to print a long table in LaTeX, i.e. it has to break across pages. I'm getting so many line breaks in the table. My code and sample table is attached. Code is:
\documentclass[twocolumn]{article}...
- 33
0
votes
0
answers
25
views
Supertabular breaks page too early
I am using supertabular and am having two issues. Firstly, it starts the table on a new column (except for the caption which is weird), and secondly, it breaks too early on the page. Does anyone have ...
- 23
0
votes
1
answer
90
views
xtab/supertabular inserts column break if column starts with section header
Background information
I am creating a book with thousands of recipes in a two-column layout. The tables with the ingredients can be short, but can also be fairly long, so I like the tables to break.
...
- 1
1
vote
2
answers
115
views
Fitting large tables
I need to fill the appendix of my work (I am using scrbook) with a lot (more than 100) of large tables. This is the end of a long work by a group of people. The tables were done in Microsoft Word in a ...
- 404
0
votes
1
answer
73
views
hline does not show up in the output
I have some long and large Microsoft word tables that I have to fit in my LaTeX document. I converted them with the Libreoffice extension, and it was easy enough. The most difficult part will be to ...
- 404
0
votes
1
answer
110
views
Supertabular paragraph environment + vertical alignment
I'm trying to create supplementary materials for a paper which involves an extremely large table spanning many pages. I'm using supertabular, but I am having an alignment issue: Multi-line cells are ...
- 61
1
vote
2
answers
219
views
Using pause in beamer within the tabular environment
In the following, I want to uncover each number on each row one at a time in the second table only. To test it I inserted a \pause command but it doesn't work. Instead it shows the entire line at the ...
- 144
0
votes
1
answer
314
views
Supertabular* in two columns article template
While changing a very long tabular into a supertabular, I had a problem having the supertabular* being equivalent to tabular*, but just continuing on the next pages. To give an example, I don't want ...
- 23
0
votes
1
answer
130
views
\tabcolsep and supertabular
While transforming a simple table into a supertabuler, the compiler kept working for long minutes. After investigating, I find out that \tabcolsep into p{} might be the problem...
Could you guys ...
- 23
0
votes
1
answer
189
views
How can I make the supertabular caption look the the normal one?
Using supertabular in a document class which defines their own caption format is not ideal:
\documentclass{IEEEtran}
\usepackage{supertabular}
\begin{document}
\begin{table}
\caption{This ...
- 5,384
2
votes
0
answers
395
views
Word wrap in supertabular two column table entry
From a Freeman CV Template:
With a two column table defined as following:
\begin{supertabular}{rl} % Start a table with two columns, the table will ensure everything is aligned
%----------------------...
- 21
1
vote
1
answer
52
views
Make multiple-page table with two columns, start from left column to the right column
i need to make a list of symbols based on a multiple-page table or another way as long as produce the same. And yes, i've read : List of Tables?. But it's too complicated for a beginner like me. I ...
- 649
1
vote
1
answer
469
views
Why does supertabular put the page break early in all kinds of situations?
In this MWE, supertabular breaks the page (or column, if one is using twocolumn) early. In fact, the first page holds only 5 lines, while the second holds 7.
\documentclass[twocolumn]{article}
\...
- 5,384
1
vote
1
answer
36
views
How can I fit a table in a page with an long inline math expression inside?
I have the problem of making this table fit inside a list in such a way that the long inline math expression can be nicely broken.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{...
1
vote
1
answer
123
views
How to make a long and narrow table in a six-column environment with supertabular over multiple pages?
I have a very long and narrow table in MS Word that looks like this and I would like to re-write it in LaTeX. At the end of each column, the table should continue to the right, and after six columns ...
- 260
0
votes
0
answers
266
views
Supertabular : help with bottom margins and title
I am writing a 3 page long table with latex supertabular.
At the top of the first page, there is a title. Then starts the 3 page long table.
I am facing 3 issues :
First, my bottom margin does not ...
- 96
0
votes
0
answers
55
views
Columns not Inline for two TCCV Sections using Supertabular
I have two separate sections which both use my new \tableentry I'm confused as to why the alignment is different for the two sections. Any pointers or ideas would be greatly appreciated!
Here is my ...
- 1
0
votes
1
answer
294
views
A wide multi-page table to be made in a two-column elsarticle document
\documentclass[final,5p,times,two column,number,sort&compress]{elsarticle}
\usepackage{lineno,hyperref}
\usepackage{amssymb}
\usepackage{amsthm}
\usepackage{tabulary}
\usepackage{booktabs,tabularx}...
1
vote
1
answer
2k
views
How to limit table width to page width?
Hi I am trying to fix the following piece of code. I would like the entry to tabular to extend to second line if it the sentences are too long. However, with this piece of code, the table entry ...
- 137
0
votes
0
answers
152
views
Wrong placements using xtabular for large table in twocolumn environment
I've been trying to make a large table that automatically breaks across pages and columns similar to what's described here.
However, as you can see in the images, table breaks way too soon and the ...
- 159
2
votes
2
answers
2k
views
multiple pages full-page-width table working with revtex
I am trying to figure out how to make a full page-width table, which continues over multiple pages in two column document. I got it working for the standard article, unfortunately the journal I want ...
- 45
1
vote
2
answers
432
views
Multi-page one-column tabularx in a two-column document
Problem:
I wish to break my one-column table, written in tabularx, over two pages in a two-column environment. I have seen examples where this could be done using supertabular, longtable and xtab but ...
- 2,775
2
votes
2
answers
1k
views
Prevent table rows from being split across pages
I have a twocolumn document with a very long supertabular table.
Within the table, I have "subsections" that I want clumped together; not split over multiple pages. For this example, each "subsection"...
- 111
3
votes
2
answers
626
views
Using supertabular, how do I create a single column table in a 2 column document?
My document has 2 columns. I am trying to create a table that has a single column (i.e. a single entry in each line) but can split across both columns of the document, and even go to the next page.
I ...
- 33
1
vote
1
answer
265
views
is there any way to define title page & abstract in tabular column & rest of contents in two column
i need to bring title & other contents as if in the image in two column document
\begin{table}
\begin{tabularx}{\textwidth}{l>{\raggedright}X}
\toprule
\fbox{\includegraphics[height=1.86in]{...
- 11
0
votes
0
answers
436
views
The long table in the multi-column
I have a long table And because it occupies a lot of pages, I want to print three columns per page, so the number of pages is too small. I used From the environment
multicols
But it has no effect ...
2
votes
2
answers
177
views
How to create custom table environment with a possibility to merge cells
I'm trying to create a custom table environment that has the following properties:
It may be very long (i.e., longer than a page) and so I need to use a
longtable
It may (or may not) have long row.
...
- 21
1
vote
1
answer
327
views
Using adjustbox type functionality with supertabular
I am trying to add a long table to a two column latex document. Since the table is long, without continuing in the 2nd column, it continue in the first column like below.
Following is the current ...
2
votes
2
answers
2k
views
Two Columns Table in elsarticle Document Class
I'm trying to create a pretty long table in an elsarticle.cls with a two column layout. However, I haven't been able to find a suitable option to break my table so it can fit on a single page and ...
- 392
3
votes
4
answers
1k
views
Transforming a table to a supertabular
I have this table (generated from an online latex table generator):
\begin{table}[]
\centering
\caption{My caption}
\label{my-label}
\begin{tabular}{|l|l|l|}
\hline
Technique & Possible ...
- 135
1
vote
1
answer
2k
views
How to fit table on a page using \supertabular in latex?
I am running this code. It formats the second page not the first. How do I fit the first page like the second. Please help!
\begin{supertabular}{|p{7.215em}|r|r|r|r|r|r|}
\toprule
\rowcolor[...
- 13
3
votes
1
answer
3k
views
supertabular: how to change font size and add caption?
1) How to use small or tiny fonts in supertabular ?
2) How to embed captions in supertabular?
I tried some possible options but they are not working.
\documentclass{article}
\usepackage{...
- 517
3
votes
3
answers
317
views
Table column not align if give color for Table entries
My code follows:
\documentclass{book}
\usepackage{color,colortbl}
\begin{document}
\begin{tabular}{ll>{\color{red}}p{20pc}}
a &1 &Test
\end{tabular}
\end{document}
The output was:
Some ...
- 2,272
1
vote
0
answers
52
views
Why do my header cells extend past the linewidth?
I am having an issue where the tablehead and tablefirsthead cells are extending past the text width. As you can see by my example, I use \textwidth and a decimal number to specify that I want each ...
- 83
0
votes
1
answer
2k
views
Formatting with supertabular and figures
I am having difficulties formatting a supertabular table that spans multiple pages, is the width of the page, and has images and text combined inside cells. My first problem is that the table seem to ...
- 83
1
vote
1
answer
421
views
Center Values and headers in long table using supertable
In the code below, how to go about aligning the headers and numbers as follows:
Here is the code:
\documentclass{book}
\usepackage[top=3cm,bottom=3cm,left=3.2cm,right=3.2cm,headsep=10pt,a4paper]{...
- 9,010
0
votes
0
answers
155
views
How do I get footnotes to work with longtable and supertabular?
I want to use footnotes from within a table. Heiko Oberdiek suggested some code, but it's still not working right; I'm getting only one out of two footnotes and two out of four footnote marks
\...
- 1,409
3
votes
1
answer
252
views
Avoid midrule and hline together at head of supertabular
I assume this is a duplicate but I couldn't find this precise problem here nor in the docs.
I am using supertabular to create a long table spanning multiple pages with \midrule after the head and\...
- 315
2
votes
1
answer
313
views
Glossaries jump page in twocolumn document
I am getting a strange behavior with glossaries package. If a place a large number of entries while using a twocolumn document, sometimes I get underfull columns with the glossary jumping inexplicably ...
- 73
0
votes
1
answer
173
views
Why isn't the text in this table centered vertically?
I'm trying to get the vertical spacing in some tables to be less squished and I thought I would do so by making the rows a bit taller and centring the text vertically in the rows. The code below uses ...
- 185
0
votes
1
answer
271
views
Supertabular: How to add \rule to first row after each break?
I'd like to add a \rule in front of each first row after each break to further separate it from the \hline. I can hardcode it in the very first row but the breaks are dynamic so that's not possible ...
- 101
0
votes
0
answers
606
views
How can I split a table over two columns? [duplicate]
Apologies if this has already been asked, but I can't seem to find an answer to my exact query.
I am working on a two column document using the book document class.
I am using the tabular environment ...
- 321
0
votes
0
answers
57
views
Is there a multicolumn-safe way to get a long table to start on the current page?
I am using the mpsupertabular environment of supertabular, and it starts a new page instead of rendering as much as will fit on the current page and splitting. The longtable package looked like it ...
- 1,409
2
votes
1
answer
361
views
How do I refer to a footnote with supertabular?
I use the mpsupertabular environment of supertabular in order to permit footnote. The basic \footnote command works fine, although it uses letters rather than numbers for the footnote marks. However, ...
- 1,409
1
vote
1
answer
2k
views
floating multipage two-column supertabular
I have a long but narrow table. To save some spaces, I'm trying to place a table spanning over multiple two-column pages, but I need help with floating as the table starts from the next page. I want ...
- 141
1
vote
0
answers
560
views
long table in landscape two column mode
I have a long table (>800 rows) but in order to reduce number of pages, I decided to put it in a two column mode, so that the table starts by filling the first column and continues on the second ...
- 141
1
vote
1
answer
505
views
side way table in double column paper format [duplicate]
I use the following code in single column format, and it gives the following output:
\documentclass[review]{elsarticle}
\usepackage{blindtext}
\usepackage{graphicx}
\usepackage{siunitx}
\...
- 69
0
votes
0
answers
34
views
Prevent pagebreak between two "tabular" tables [duplicate]
I have a file with two tables generated by tabular environment. But the first table is very short but the second one is very long (several pages). As a result, my typesetting automatically starts the ...
- 643
2
votes
1
answer
212
views
Keeping two rows on a page using xtab
Similar to this question I want to have two particular rows of a table on the same page. Because my document is in twocolumn mode I use xtabular. In longtable the command \\* is supposed to work. In ...
- 499
1
vote
1
answer
238
views
How to fix tables without using the landscape instruction [closed]
I am looking for "experts on tables" :) I have different format of tables I have tried to fix them \begin{landscape} (it works, but I would prefer if my tables all looked the same). I have tried to ...
- 109