Questions tagged [sv-classes]
"sv" stands for Springer-Verlag, concerns classes of this publisher, they are named "sv..."
132
questions
0
votes
1
answer
106
views
How to produce double column equation in two column SVJour3 LATEX2ε document?
I am using SVJour3 LATEX2ε two column and want to span a very long equation across both columns, and to separate it from the remaining text by horizontal lines. Multicol and widetext do not work in ...
0
votes
0
answers
16
views
Springer svjour3 template has too much space between title and author
I am going to send my paper to the springer and select the svjour3 two-column template.
But it has too much space between title and author, I want to ask if this is normal, my mentor said that space ...
0
votes
2
answers
67
views
How to set the label of each sub-figure in its correct position? [duplicate]
I want to insert the label of each sub-figure in its correct position.
Fig1:
Therefore, I want the label of the sub-figures to be the same as the fig.2, and the location of the caption to be the same ...
2
votes
2
answers
45
views
Missing point in theorem number
I am required to use Springer's svjour3 as \documentclass and this leads to an ugly numbering: Using \newtheorem{mytheorem}{Theorem}[section] and \begin{mytheorem} this yields numbers like 11,12,21,...
0
votes
0
answers
48
views
cleveref does not work together in sv classes with envcountsame option
I posted once before about this issue, here, but would like to start a new thread with more information and a MWE. I hope that's OK. (In the old post I did not very adequately explain the situation, ...
2
votes
1
answer
38
views
New command using if/then statement based on cleveref values?
I have a special command defined called \Exerref which works on labels, much like \Cref. Would it be possible to create a new command, let's call it \Sref, that invokes either \Exerref or \Cref based ...
0
votes
0
answers
50
views
Using orcidlink package in a SVmult.cls class file
I'm trying to use the orcidlink package in a svmult class file, however I always get errors when compiling the document. I find out that if a took the hyperref from orcidlink package the error stops, ...
0
votes
0
answers
25
views
How to customize citation to show book publisher "IPCC" and year?
I'd like to customize single citations to remove et all and show only publisher and year e.g. (IPCC, 2013).
Alternatively, if it cannot be done using Natbib then showing leading author, et al, year, &...
0
votes
0
answers
30
views
Compiling one tex file with two styles
I am working on a book project with Springer. I finished a draft with their style file and it complies well.
Now, I hope to put this on ArXiv after stripping out all the proprietary material including ...
3
votes
1
answer
135
views
"Argument of \@tempa has an extra }" problem in TeX Live 2019/Debian with svmono (Springer)
My Latex source of a large document was working perfectly in TeX Live 2017/Debian with Ubuntu 18.04, but when upgrading to Ubuntu 20.04 and to pdfTeX 3.14159265-2.6-1.40.20 (TeX Live 2019/Debian), the ...
0
votes
1
answer
80
views
svmono + newtx + \footnotesize = excessive horizontal spacing in math
Feeding the input
\documentclass{svmono}%%% v5.6 from http://www.springer.com/gp/authors-editors/book-authors-editors/your-publication-journey/manuscript-preparation
\usepackage{newtxtext,newtxmath}%% ...
1
vote
0
answers
1k
views
Author affiliation and corresponding author for Springer journal [closed]
I want to indicate the corresponding author in my manuscript planned to submit to a Springer journal (J. Signal Processing System), but I couldn't find any hints in the user manual.
Ideally, it should ...
0
votes
2
answers
82
views
Numbering Theorem, definition, Proposition, Corollary, Remark by section consecutively without repetition
I am writing a paper for publication in Springer journal using svjourclass, and I am using the following set of commands
\RequirePackage{fix-cm}
\documentclass[smallextended,envcountsect]{svjour3}
\...
3
votes
2
answers
181
views
svjour3 with envcountsame breaks autoref and cleveref
When converting my manuscript to Springer's custom svjour3 document class using the option envcountsame (to use only one counter for all theorem-like environments), all references to propositions, ...
2
votes
1
answer
49
views
Declaring names of environments in labels?
I am using the svmono class with envcountsame option. Unfortunately, this ha issues with cleveref because of how the class defines its environments.
For example, if I have \begin{proposition}\label{...
1
vote
1
answer
136
views
Can I use the svmono Springer template files for self publishing a book outside of Springer?
I want to self publish a Math book and would like to use the svmono style template files as the base. I checked the files themselves, the Springer publishing guide, but nowhere do they reference the ...
1
vote
1
answer
203
views
References display in spbasic style
I am using spbasic for typesetting a Springer Journal paper. References as listed inconsistently when they are listed. dot and space are missing after the author year format when author names have et ...
1
vote
1
answer
1k
views
How to add ORCID ID icon for Springer \documentclass[twocolumn]{svjour3} format?
It seems like adding ORCID ID ICON to Springer \documentclass[twocolumn]{svjour3} format is different from IEEE format. I tried several methods but I could not solve it. Can someone help me with the ...
-1
votes
1
answer
389
views
How can I prevent Abstract jumping to the next page in Springer \documentclass[twocolumn]{svjour3} format?
Here is my code below: The "Abstract" word stay in the first page but its text jumps on the next one. Can anyone help me on how to prevent my Abstract text skipping to the next page without ...
1
vote
1
answer
97
views
How can I change the position of the "Abstract" title in Springer paper?
I am writing a paper using \documentclass[twocolumn]{svjour3} for a Springer journal. Journal format requires the title of the abstract (i.e. the word "Abstract", not the title of the ...
0
votes
1
answer
206
views
Footenote disappears when I use twocolumn for abstract ? (with \affmark and \affadress not with \thanks)
I am writing a paper using \documentclass[twocolumn]{svjour3} for a Springer journal in two column format. I want to make abstract in one column since it is required in the journal format. Journal ...
0
votes
1
answer
57
views
Statistics and computing journal bibliography style
I am sending our manuscript to Statistics and Computing Journal, however, its bibliography style isn't found in any svjour style! The style is as follows:
Hamburger, C.: Quasimonotonicity, regularity ...
1
vote
1
answer
481
views
Is BibLaTeX incompatible with the Springer document class SVJour3?
I am having difficulty using BibLaTeX within the Springer document class SVJour3. Following the video on this Overleaf page, I've written the .tex file below. However, compiling it returns a warning ...
0
votes
0
answers
35
views
Strange vertical space with svmult and subequations environment
When using the class svmult and the environment subequations from amsmath, an ugly vertical space is inserted between text and formula, when a \label command is used. Moving the subequations env. in ...
1
vote
1
answer
101
views
Again: Incorrect table of contents when using svmult.cls: References appear twice
The original question has been marked closed, but it bytes me today.
Original question: Incorrect table of content when using SVMULT (references appear twice per chapter)
I have downloaded the ...
0
votes
1
answer
115
views
How to determine in advance whether a chapter has any sections, a section has any subsections, or a subsection has any subsubsections?
Continuing Test if a chapter has sections : to number theorem-like environments in a nice way, it is advisable to know at the start of a logical portion of your document whether this logical portion ...
0
votes
0
answers
58
views
Adjust tikz-figure as a subfile on the text width (svjour3 template)?
I have to use the svjour3 document style. In my document, I need to include a fault tree which I created in a different file/chapter.
My problem: Unfortunately, the tree is not adjusted to the normal ...
3
votes
1
answer
161
views
Cleveref fails to pick up the footnote number when using svmono 5.6 class
Consider the following input:
\documentclass{svmono}%%% Version 5.6 from https://www.springer.com/gp/authors-editors/book-authors-editors/resources-guidelines/book-manuscript-guidelines/manuscript-...
0
votes
1
answer
241
views
How can I put three author names in the title of a document using svjour3 document class?
I use svjour3 to write my paper, but I can not put all author names in one line, how can I correct it? My code is below.
\documentclass{svjour3}
\smartqed
\journalname{Earth Science Informatics}
\...
0
votes
1
answer
81
views
svmult doesn't play well with babel
MWE using svmult class from https://resource-cms.springernature.com/springer-cms/rest/v1/content/20568/data/v8
\documentclass[graybox]{svmult}
\usepackage[british]{babel}
\begin{document}
\section{...
0
votes
1
answer
79
views
Svmono Class - Numbered Paragraph (Section)
Does anyone know how to set up the svmono class in order to get the paragraph sections numbered as well? The default setting is without numbering. See MWE:
% !TEX TS-program = pdflatex
%%%%%%%%%%%%%%%%...
0
votes
0
answers
182
views
SVMono Example Environment
I am writing a book using Overleaf with the SVMono Document Class (since the book will be published by Springer-Nature). The problem I am encountering concerns the "Example" environment (...
1
vote
1
answer
312
views
No .bbl file generated in the Springer document class svjour3 and bibliography style spmpscis when using Texmaker
I want to write a Springer conference article. I have download its template but when I create a new bibliography file bibliography.bib and I add a citation, the following message is shown:
LaTeX ...
1
vote
1
answer
237
views
Bold subsection headings in svjour3
I am trying to make my subsection headings in the svjour3 document class look exactly like my section headings. Here is the code I have used:
\makeatletter
\renewcommand{\subsection}{\def\subsection{\...
1
vote
0
answers
45
views
Incompatibility: biblatex / tableofcontents / tikz / springer class? [duplicate]
I am completely stumped by the following MWE, on which any run of pdflatex except the very first run results in a citation-free .bcf file, whereupon biber complains:
WARN - The file 'mwe.bcf' does ...
1
vote
0
answers
685
views
one column abstract inside two columns paper for springer svjour3 template
I'm facing an issue when trying to format one column abstract inside two columns article. I'm using svjour3 template for springer for the first time. When I add the below code, the footer notes ...
3
votes
2
answers
100
views
How do I slant vertical bar in the header?
I understand that there is a solution for this, but I do not want to change the encoding of my file, i.e. utf8 to T1. I want to get the following headers, but it just isn't working.
A friend ...
0
votes
1
answer
48
views
Multiple figures with different caption set up commands
So I'm trying to place in margin figures, as well as central figures. And for the margin figures, I want to make something like this:
But for the center figures, I want the caption label to be like ...
2
votes
1
answer
68
views
Proof environment in the svmult class
I'm using the svmult class. If I write
\begin{proof}[Proof of Proposition 1]
what I get is
"Proof(Proof of Proposition 1)"
How can i get "Proof of Proposition 1" only?
Thank you for the ...
0
votes
0
answers
61
views
Problem with labels
I have a problem with labels using the springer-style svmono. I have the following code:
\documentclass[graybox,table,envcountchap]{svmono}
\usepackage[T1]{fontenc}
\usepackage[ngerman]{babel}
\...
2
votes
2
answers
93
views
Error with joined use of SVMONO class and Babel Package
I have a problem with the joined use of svmono class from springer link and the babel package. When I activate the babel package it produces the error:
"Missing \begin{document}. \newlabel{Einleitung}...
0
votes
0
answers
62
views
Springer Bibliographystyle: References in paper text too long and without brackets
I have to write a paper with Springer Bibliographystyle.
I do \cite{khan2013} and receive this in the text:
Khan, Muhammad Naeem Ahmed and Khalid, Muhammad and ul Haq, Sami (2013),
That is ...
2
votes
1
answer
162
views
[vecarrow]{svmono} fails
The documentation of svmono v5.6 from http://www.springer.com/gp/authors-editors/book-authors-editors/resources-guidelines/rights-permissions-licensing/manuscript-preparation/5636 says in refguide.pdf:...
1
vote
1
answer
144
views
{xe|lua}latex + svmono + newfloat + biblatex = ↯
Running xelatex or lualatex on
\documentclass{svmono}%%% V 5.6 from http://www.springer.com/gp/authors-editors/book-authors-editors/resources-guidelines/rights-permissions-licensing/manuscript-...
0
votes
0
answers
693
views
How to run Springer's SVMult class (showing error)
I am using Winedt editor.
I am trying to create a document with Springer's SVMult class.
When I am running, it is showing SVMult.cls' not found. I have never used this document class before and it ...
0
votes
0
answers
94
views
ToC for svmult with \include
I am editing a book with multiple contributions using Springer's svmult document class. To include the single contributions into one document I am making plain use of \include{}. All goes fine up to ...
1
vote
1
answer
152
views
Cite fails after `\tableofcontents` in `svjour3.cls` when `todonotes` is loaded
When using the Springer class svjour3 (can be obtained here), I stumbled upon a problem with \cite. Look at the following minimal example:
\documentclass{svjour3}
\usepackage{todonotes}
\usepackage{...
1
vote
1
answer
205
views
svmono v5.6 doesn't like unnamed labeled examples
Put
\documentclass{svmono}%%% v5.6 from http://www.springer.com/gp/authors-editors/book-authors-editors/resources-guidelines/rights-permissions-licensing/manuscript-preparation/5636
\begin{document}
\...
0
votes
1
answer
117
views
Modify page number position in svmono class
As in the title, I would like to know how I should modify the svmono class in order to have the page number centered down (right now they are on the top left/right of the page).
Any feedback will be ...
1
vote
1
answer
656
views
Reference in square brackets for springer document class svjour3 [duplicate]
I am using springer svjour3. I want the reference numbers to be in square brackets in the reference section.
For example:
[1] Moritz AR, Zamchek N (1946) Sudden and unexpected death of young
...