Skip to main content

Questions tagged [tabularray]

{tabularray} is about questions regarding the tabularray package, which is used for typesetting tables and provides much of the functionality of the outdated tabu package. It can also completely separate styles from the contents of tables, and the styles of tables can be set in keyval way. Also it supports long tables with X columns in two-column documents.

Filter by
Sorted by
Tagged with
0 votes
1 answer
22 views

Align cells in the centre (vertically and horizontally) in longtblr

Consider the MWE: \documentclass[a4paper,12pt]{article} \usepackage{booktabs} % new tables \usepackage{tabularray} \UseTblrLibrary{booktabs} \begin{document} \begin{longtblr}[ caption = {List ...
lukygee's user avatar
  • 59
2 votes
1 answer
34 views

make4ht and tabularray error

I get an error when I try to use make4ht with tabularray, here is a MWE : \documentclass{article} \usepackage{tabularray} \begin{document} \begin{tblr}{l} 1 \\ 2 \\ \end{tblr} \end{...
Manuel Cart's user avatar
1 vote
1 answer
72 views

Cannot use a \toprule inside a \longtblr

When trying to use a command I have defined inside a longtblr gives the following error: 20: Misplaced \noalign. \end 20: Missing } inserted. \end 20: Missing \endgroup inserted. \end 20: Missing } ...
lukygee's user avatar
  • 59
3 votes
1 answer
62 views

How can I center data values in the column in a table environment

I have a data table and I want to center the data values underneath the heading "Angle of incidence", so rather than the numbers 0, 15, 30, 45, 60, 75 being situated left I want them to be ...
user323614's user avatar
2 votes
2 answers
80 views

Get the Error with siunitx

Now I recompile the answer at here \documentclass{article} \usepackage{tabularray} \UseTblrLibrary{diagbox} \usepackage{siunitx} \sisetup{output-decimal-marker={,}} \UseTblrLibrary{siunitx} \begin{...
John Paul Peter's user avatar
1 vote
1 answer
47 views

How can I create a multipage landscape table in tabularray?

I have tried severall combinations of tblr, longtblr, talltblr, sidewaystable, and landscape but I can't manage to produce a landscape table that spans several pages. I would also like to repeat the ...
SparklingWater's user avatar
4 votes
1 answer
73 views

How can I reduce the code to make this table with tabularray and fit the table?

I am trying to make the table with tabularray package I tried \documentclass[12pt,a4paper]{article} \usepackage{tabularray} \UseTblrLibrary{siunitx} \UseTblrLibrary{diagbox} \UseTblrLibrary{booktabs} \...
Thuy Nguyen's user avatar
  • 1,032
0 votes
0 answers
33 views

Tabularray with footnotes inside a tcolorbox/ minipage

This question is related to Tabularray with footnotes and the new thing is that my tblr-tables are sometimes inside of tcolorboxes. The style of the numbering then goes wrong and counting up the ...
Michael.H's user avatar
  • 107
3 votes
0 answers
27 views

Balance longtblr at the end of two column mode

I have a long table using the tabularray package. It spans over at least one page in two column mode. Breaking after a column is done works perfectly fine, however on the last page all of the table is ...
N0W0RK's user avatar
  • 85
3 votes
1 answer
62 views

Help with a tricky table

I teach maths with a colleague and we wish to create a workbook for our students to use. He want's to use Word, I wish to use \LaTeX. He knows the basics of typesetting in \LaTeX so I want to provide ...
Alec's user avatar
  • 155
2 votes
2 answers
40 views

question about how to use custom counter for row numbers of tables

I put \newcounter macro to use for adding row numbers in a table. The test document is as follows: \documentclass{memoir} \usepackage{tabularray} \newcounter{mycounter}[table] \NewDocumentCommand\...
Seong's user avatar
  • 237
3 votes
1 answer
35 views

Segmented longtable(longtblr) across multiple columns

I am trying to create a checklist. As the rows of the checklist aren't to wide it would be nice to split the page into two columns. However longtable does not support 2 Column mode and longtblr works ...
N0W0RK's user avatar
  • 85
0 votes
1 answer
50 views

How to count the total number of textlines in a table when the texts wrap inside a cell

Essentially, I am referring to this question I posted a couple years back. The query I posted in the first comment to the accepted answer still remains unresolved. It occurs to me that if the total ...
Subhajit Paul's user avatar
2 votes
1 answer
45 views

Tabularray: 2pt hline and vline border to one row causes other row lines to extend beyond table edge

I am working on my thesis and generated a truth table using tabularray. Everything is fine until I add an hline and vline border around the last row of the table: the hlines for all other rows extend ...
cyoung701's user avatar
1 vote
1 answer
53 views

Animate cell color in tabularray (Beamer)

I want to show entries of a table I made with tabularray in beamer. The code looks like this: \documentclass[12pt]{beamer} \usepackage{animate} \usepackage{amsmath} \usepackage[english]{...
forgetfuled's user avatar
2 votes
1 answer
48 views

LuaLaTeX/Tabularray - SetCell code taking up all columns seems to not work when had by itself

I'm trying to make my resume in LaTeX (trying to put my skills to the test) that has tabularray code that doesn't seem to work when I want SetCell to take up all columns and only have that. \...
Felix Maldonado's user avatar
2 votes
1 answer
61 views

How to properly expand expl3 Macros within tblr environment (from tabularray package)

I've been working on a macro that takes a comma-separated list of lists and converts it into a table that spans the full width of the page, with specific text formatting applied to certain columns. ...
Mycroft_47's user avatar
1 vote
0 answers
44 views

Issues with Misplaced Alignment Tab Character and Table Width in tabularray Environment [duplicate]

I've adapted the code below from this answer to switch from the tabular environment to the tblr environment from the tabularray package. While the original code works perfectly with tabular, I'm ...
Mycroft_47's user avatar
1 vote
1 answer
41 views

Tblr Multiple rows/columns alignment

I am trying to create this using LaTex. It comes from Mark Sparks Daily Lessons and Assessments. I have messing with it for an hour and wonder how I can clean my code up and if the code I have is ...
Nick B's user avatar
  • 903
3 votes
3 answers
90 views

Aligning vertical text in a tabularray environment

I am trying to make a 2x4 tabular containing images, with horizontal captions at the top and vertical captions on the left. Taking inspiration from this thread, I painfully managed to do this: \...
Andros's user avatar
  • 339
0 votes
1 answer
42 views

Is there a way to change the colour of the note marker inside a talltblr from the tabularray package? (+ 2 related subquestions)

I have a table I am making using the tabularray package. Main question: Is there a way to change the colour of the marker that is put inside the table cell? Currently in texstudio it is shown in red ...
SamVV's user avatar
  • 33
2 votes
2 answers
57 views

tblr-extras, how to put caption below table

With tblr-extras you can use caption package for set up caption style. It works fin, if caption is above table. For example: \documentclass{article} \usepackage{lipsum} \usepackage[font={footnotesize,...
Zarko's user avatar
  • 299k
0 votes
1 answer
22 views

List in tblr environment and text specifications

How do I make a list in tblr environment such that text is justified and vertically aligned in the center? Is this also the correct way to stack two equations in one cell? \documentclass[9pt, ...
juan19.99's user avatar
0 votes
1 answer
36 views

How can I make lines break automatically in table?

\fancyhf{} \rhead{Juan Da Silva} \lhead{Machine Learning} \rfoot{Page \thepage} \lfoot{TUM} \renewcommand{\headrulewidth}{0.5pt} \renewcommand{\footrulewidth}{0.5pt} \usepackage{ragged2e} \justifying ...
juan19.99's user avatar
1 vote
1 answer
21 views

Vertical alignment in tblr environment

I am trying to vertically center cell contents for a few columns. The manual says this is possible on page 5 using Q columns. \documentclass[letterpaper]{article} \usepackage[sfdefault]{roboto} \...
Ritmo2k's user avatar
  • 153
4 votes
2 answers
131 views

How to reduce margin size for one slide to fit a table in beamer?

I want to reduce the margin size for one slide so I can put a wider table into it. I have this MWE: \documentclass{beamer} \usepackage{geometry} \usepackage{tabularray} \setbeamertemplate{frametitle}[...
Simd's user avatar
  • 6,911
2 votes
1 answer
69 views

Multiple errors with tabularray

I want to create a table with the tabularray package but I don't understand why the compilation gives me several errors: I have the impression that it is due to word wrapping in the cells. Can anyone ...
Nicolas's user avatar
  • 1,257
2 votes
1 answer
58 views

Tabularray multicolumn table with long text goes over the margin

I have the following code that uses tblr which has a paragraph go over the margin, which isn't the intended result. \documentclass[letterpaper,12pt]{article} \usepackage{showframe} \usepackage[left=1....
Ferrius Undermine's user avatar
4 votes
1 answer
72 views

tabularray, increasing space below header

I have a table like this \documentclass{scrartcl} \usepackage{tabularray} \usepackage{eurosym} \DeclareUnicodeCharacter{20AC}{\euro} \begin{document} \begin{tblr}[long]{ colspec={ ...
SlowFox's user avatar
  • 115
4 votes
1 answer
91 views

KOMA Script (scrlttr2) and tabularray - compatibility issues?

A M(N)WE of what has once been a rather complex table: \documentclass{scrlttr2} \usepackage{tabularray} \begin{document} \begin{letter}{ } \begin{tblr}[long]{l} test \\ \end{tblr} \end{letter} \end{...
SlowFox's user avatar
  • 115
4 votes
1 answer
60 views

tblr environment in tblr environment

When I put one tblr environment in another there is an alignment problem, it is centered when it should not as you can see in the example below. \documentclass{article} \usepackage{tabularray} \...
Manuel Cart's user avatar
0 votes
0 answers
57 views

Options for efficiently editing large documents

I have a large document that contains nearly one hundred longtblr or tblr type tables. Even on a powerful computer, this takes several minutes to compile. I already use \input{}s and split my report ...
Ritmo2k's user avatar
  • 153
0 votes
1 answer
39 views

(Tabularray) how do i make it so that a \linewidth setup has indentation spacing on both sides?

I have the following code that is tblr code that has tables being indented and causing my desired \linewidth result to not be achieved \documentclass{article} \usepackage[left=1.5cm, right=1.5cm, top=...
Ferrius Undermine's user avatar
2 votes
2 answers
58 views

csvsimple does not show last saved entry

I ran into an issue while trying the csvsimple package, and I am unsure if I made a mistake somewhere or if it is a possible bug in the package. I have found a workaround for my issue, which I have ...
Fibecker's user avatar
3 votes
1 answer
42 views

Rows with equal height in a multirow tblr table

I have written the following code. It uses the tblr environment from the tabulararray package to typeset a table. The table has an image on the first column and an arbitrary number of rows on the ...
Rodrigo Morales's user avatar
2 votes
1 answer
43 views

\TblrNote don't show up in tabularray-table

It's as simple as that: my \TblrNotes in an tblr-environment don't appear in the pdf, luaTeX doesn't even complain, which it did when the document was longer (warning (pdf backend): unreferenced ...
Alexander Wittmann's user avatar
2 votes
1 answer
50 views

Custom tabularray environment with font changes

I'm trying to learn tabularray and wanted to setup some custom environments. I really like the idea of being able to move some of the layout markup outside of the actual tabular code, but there are ...
mrf's user avatar
  • 926
0 votes
0 answers
226 views

Why is `tabularray.sty` not recognized even after downloading it?

I'm getting an error "File 'tabularray.sty' not found" not recognized, even after I did the following: 1). I ran sudo tlmgr install tabularray 2). Then I ran sudo texhash 3). And then I run ...
underdog987's user avatar
3 votes
1 answer
46 views

Reduce the size of certain cells in table

In my table, some data appears on 2 lines because the content is probably too large. I was thinking of reducing the size of the text in certain cells (cell {2}{2} to {5}{5}) but I'm not sure how I ...
Nicolas's user avatar
  • 1,257
1 vote
1 answer
48 views

tabularray: Use `caption` package to format table caption while typesetting tables without caption or LOT entry

I am writing a longer document divided into \frontmatter and \mainmatter using the scrbook class. While both a table caption and a LOT entry should be generated for tables provided in the mainmatter, ...
albert's user avatar
  • 997
3 votes
1 answer
49 views

Remove tabularray table caption

Issue I want to use a longtblr from tabularray with no captions (e.g., "Table 1: Test Table"). Minimum Working Example \documentclass{article} \usepackage{caption} \captionsetup{ format=...
Einreinfall's user avatar
5 votes
1 answer
88 views

Odsfile package in combination with tabularray: Misplaced alignment tab character & error

I want to include a ods file using the odsfile package in combination with the tabularray package. However this results in an Misplaced alignment tab character & error. Here is a M(n)WE: %% ...
student's user avatar
  • 29.2k
3 votes
1 answer
72 views

luatex tex.sprint'ing \SetCell produces different result

I will be making a wrapper around tabularray's \SetCell macro using lualatex. Using tex.sprint to produce \SetCell[c=2]{c} however produces a different results than typing it in out directly. Any ...
likethevegetable's user avatar
3 votes
2 answers
105 views

vertical align text in tabularray with tikz node inside

I would like the text in cell vertically center but it stay at the bottom. The rowspec looks like not take effect. The m should be vertically center. \documentclass{standalone} \usepackage{tabularray} ...
beetlej's user avatar
  • 1,013
1 vote
0 answers
61 views

Error in a table : "Missing number, treated as zero"

when I compile my table, I get the error "Missing number, treated as zero." I looked, it tells me I added a zero but I can't find it in the table so I can't see what's wrong in my code. \...
Nicolas's user avatar
  • 1,257
0 votes
2 answers
87 views

Any Idea that How do I bring this table to the upper page?

I am writing a report on latex and I encountered an issue. When I was making my table using 'tblr' from tabular array package, I found out that my table that is supposed to clearly fit in the current ...
mr.hello291's user avatar
0 votes
1 answer
42 views

remove tabularray first row sep lines

Whats proper way to remove first row col sep lines of tabularray table? For below example the vertical lines around A,B should be removed. \documentclass[border=1cm]{standalone} \usepackage{tabularray}...
beetlej's user avatar
  • 1,013
3 votes
1 answer
50 views

tabularray's multiline cells and cmd: incompatible?

It doesn't seem possible to combine tabularray's multiline cells and cmd, as shown by the following MCE: \documentclass{article} \usepackage{tabularray} \begin{document} \begin{center} \begin{tblr}{ ...
Denis Bitouzé's user avatar
2 votes
1 answer
75 views

Converting a tabular table to a tabularray table

Right now, I'm converting my tabular table to a tabularray one after I asked this question where this is my desired output but the first column is centered vertically: Right now I have problems with ...
Kenneth Ligutom's user avatar
0 votes
0 answers
24 views

Unknown errors ocuur in front page

I am actually using the template from my University, which you can find it attached at the end. However, I constantly get the errors from the logs. It occure ant the last one \end{minipage} line. ...
Zijin Cheuk's user avatar

1
2 3 4 5
11