Questions tagged [tabulary]

{tabulary} is for questions pertaining to the use of the tabulary package to create a tabular-like environment.

Filter by
Sorted by
Tagged with
0
votes
1answer
26 views

table heading splitting

I'm using two-column formate and aiming to make a table that spans only one column, though for small heading it's okay, however, when the length of heading is increasing the table goes to the 2nd ...
1
vote
1answer
35 views

Question about tabular , how to improve this one?

\documentclass[12pt,a4paper,final]{article} \usepackage[left=1.5cm,right=1.5cm,top=1cm,bottom=2cm]{geometry} \usepackage{amsmath,amssymb,amsfonts} \usepackage{graphicx} \usepackage{tabularx} \...
1
vote
1answer
33 views

alignment issue with sidewaystable enviroment in LaTeX

I am having an alignment issue with the entries that I am entering in my table. I use inform3 class and the output looks like Here are two important things: i) when I use . in any of the entry, it ...
0
votes
1answer
45 views

How to set up the supervisors approval page on the thesis

My Institute use this format for the supervisor approval. I have tried it. But the the result is not same with the format. The alignment in left side, and the space (spasi) are not same. Please help ...
0
votes
1answer
40 views

Align multi pictures with their titles and descriptions

I am using rmarkdown to produce this kind of report. I used framebox to show that pictures' sizes are not same. I am trying to align 11 pictures (6 pictures per row, 2 rows), with different sizes, add ...
1
vote
3answers
122 views

Text overlapping between rows while using tabulary

I have a table, which is done using tabulary. The output are looking good, if there is no multi-row/column. But, the output is very bad, if it contains multi row. Can anyone help me out?. \...
0
votes
0answers
45 views

How to fit a table in a one row? [duplicate]

I want to fit a table in same column, but it seemed cannot fit, i do not want making the font size smaller than my other text. \documentclass[12pt,oneside]{book} \usepackage[showframe]{geometry} \...
0
votes
0answers
19 views

glossaries: fail to expand in tabulary

I have a problem similar to the question glossaries: fail to expand in tabularx. I have acronyms which might apear for the first time in a tabulary environment. (I know that this is not good practice ...
0
votes
1answer
39 views

Wrap multicolumn in a tabulary table

I'm trying to get a multicolumn cell to wrap the contents inside a tabulary table. The table is being dynamically generated, so I can't manually set the width of the multicolumn cell for wrapping. ...
0
votes
2answers
64 views

Why \% unable to use in table, overlap (Table alignment)

I tried to type % in my table, but its overlaps. \documentclass[12pt,oneside]{book} \usepackage{showframe} \renewcommand\ShowFrameLinethickness{0.15pt} \renewcommand*\ShowFrameColor{\color{red}} \...
2
votes
0answers
24 views

Doesn't tabulary honor the table width without wrapped lines?

With this MWE, I try to recreate a tabularx table with tabulary (the C column type being builtin): \documentclass{article} \usepackage{tabularx} \usepackage{tabulary} \begin{document} \begin{...
2
votes
2answers
50 views

Aligned environment effecting tabular environment

I have successfully incorporated an aligned environment in my tabular environment, but now my second column is not aligned with my first. I think that I need to remove the automatic line break after ...
0
votes
0answers
66 views

Prevent pagebreak in the longtable - tabulary hybrid

I like the hybrid of longtable and tabulary environments, that was devised on this site, so much, that I came to use it exclusively. References: Multi-page with Tabulary? Longtable and tabulary ...
0
votes
0answers
38 views

How to design this table? [duplicate]

I have this table \begin{table} \begin{tabular}{@{} l *{5}c @{}} \toprule \multicolumn{1}{c}{Method} & 0s & 1s & 2s & 3s & 4s \\ \midrule A & 52.7 & 76.9 & 56.5 &...
2
votes
1answer
51 views

align rows with columns of different widths

I've been failing to make a proper table where text width changes and have different sizes. Here is the table when I use tabulary environment. I want to have the columns have the same size and ...
7
votes
3answers
186 views

New to LaTeX and need help with a table for my Lesson Plan

I am new to LaTeX and I decided to use it for my Lesson Plans. I have created a table for my lesson planning. But I am struggling to have it aligned properly and to have it fill the whole page in ...
2
votes
1answer
33 views

Problem with tabulary when used inside user macro

I have having problems with tabulary inside a user macro. The purpose of the macro is to decide whether to use a longtable or tabulary, depending on the number of rows. Below is a MWE (or a MNWE, ...
1
vote
1answer
55 views

Set specified width for column

I am trying to make a table and want to set the first column with specified width, namely 1 inch. I have seen some relevant solutions, but they basically use \textwidth. Therefore I am looking if ...
1
vote
1answer
501 views

how to create a table with acm

I am creatin a table with latex using ACM template with \documentclass[sigconf, anonymous]{acmart} This is my code: \begin{table} \centering \begin{tabulary}{\textwidth}{CLCL} \toprule \multicolumn{2}...
0
votes
1answer
34 views

Tabulary - missing number - treated as zero

I do understand where the error is about the missing number: Missing number, treated as zero. \end{tabulary} \documentclass[a4paper,11pt]{article} \usepackage{hyperref} \usepackage{fontspec} \...
1
vote
1answer
121 views

tikz graph in tabular

Καλησπέρα! I 'm trying to put graphs that are made by tikz in a tabular, but: the size of the graph is too big for the table, I 'm wondering if in not "safe" to combine tabular and tikzpicture ...
3
votes
2answers
64 views

Colourise rows of a table depending on a cell content

I looked around a bit but could not find an appropriate answer. I have a table in which I want to colourise rows green if there is a checkmark in the second cell, otherwise leave it white. I would ...
2
votes
1answer
98 views

Cannot typeset an equation correctly

I'm trying to typeset the following equation, but I get complaints about 'missing $ inserted'. \begin{equation} \label{Pearson} \begin{tabulary} {18cm}{L R @{} >{${}}c<{{}$} @{} L} &Sim_{a,...
0
votes
1answer
67 views

tabulary: overflow and column squeezing

I am having problems with tabulary in a 2-column table. If column2 has multiple lines of text, it causes column1 to be squeezed to a ridiculously small width. And column1 sometimes overflows into ...
0
votes
1answer
180 views

tabulary: Support for scaled column widths?

Can I use the tabulary package to create a 2-column table, with column1 using 30% of the available width and column2 using 70%? For example: \begin{tabulary}{|p{30%}|p{70%}|} ... \end{tabulary}
1
vote
2answers
129 views

reproduce a specific table

I am stucking to reproduce this triangle : This is what I did : \begin{table}[!ht] \center \begin{tabular}[b]{|l|c c c c c|} \hline & \multicolumn{5}{|c|}{developpement ...
6
votes
1answer
67 views

Missing vertical space in tabulary

Please consider the following MWE: \documentclass{article} \usepackage{tabulary} \begin{document} \begin{tabulary}{5cm}{rL} A & B\\[5cm] A & B\\ \end{tabulary} \end{document} ...
2
votes
0answers
160 views

'lstlisting' inside a table cell ignores line breaks

I am trying to put code listings within a tabulary cell. It works fine for the most part except that lstlisting is merging all lines into a single line. The MWE shows the problem. Any idea how it can ...
0
votes
1answer
47 views

2 tables horizontally

how can I have both well organized arrays with the same number of lines and organize the underlining in each part of the array ?? \documentclass{report} \usepackage[francais]{babel} \usepackage[utf8]{...
1
vote
1answer
679 views

Simple table without borders

I would like to draw simple table without borders but the problem the the content of the second column exceeds the margins of document How can I fix that problem \documentclass{article} \usepackage{...
2
votes
1answer
865 views

Change font size within table

I have this code: \documentclass[11pt]{article} \usepackage[margin=2.5cm, showframe]{geometry} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage{setspace} \usepackage{lipsum} \...
2
votes
3answers
266 views

Remove space between specific column entries in table

I have this code: \documentclass[11pt]{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage[english]{babel} \usepackage[margin=2.5cm]{geometry} \usepackage{setspace} \usepackage{...
1
vote
1answer
464 views

Wrap text around table

I am writing a report, where I in between text provide a couple of tables that fill an entire page. The code below is an example of how I have structured my report: \documentclass[11pt]{article} \...
0
votes
2answers
83 views

Customize Table Header

I have the following code: \documentclass[11pt]{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage[english]{babel} \usepackage[margin=2.5cm]{geometry} \usepackage{multirow} \...
0
votes
1answer
95 views

wrong title width with subsubsections

After using tabulary to insert multirow table using this link, the title width of only subsection and subsubsection that comes after the table changed. I tried with titlesec package but it does not ...
1
vote
1answer
69 views

In tables how to auto wrap words (linebreak), align to the left, use only textwidth, preserve table numbering

It is very annoying to manually break lines within a table that contains lot of text. I have seen several questions (many really old, maybe deprecated) around here regarding setting the width of ...
1
vote
2answers
74 views

Table in landscape with wrapped text

I have \documentclass{article} \usepackage[utf8]{inputenc} \usepackage[showframe]{geometry} \usepackage{colortbl} \usepackage{array, makecell, caption} \definecolor{gray1}{RGB}{238,236,225} \...
1
vote
1answer
387 views

Trouble with \begin{tabulary} vs. \tabulary

I'm working on some macros for recipe cards and I'm using the tabulary package to limit the width of the ingredients list. I played around until I found something the behaved the way I wanted, then ...
0
votes
0answers
27 views

Tabulary suppress frame border

I'm using Python Sphinx to generate my manuals which contains a variety of different tables. In some case I need to adjust a table, so that it doesn't show the frame any longer. Python Sphinx outputs ...
5
votes
1answer
674 views

Game theory payoff table - small correction needed

I would like to create a payoff matrix that looks like this: With the following code: \begin{align*} \begin{tabular}{cc|c|c|} & \multicolumn{1}{c}{} & \multicolumn{2}{c}{Suspect 2} \\\cline{...
1
vote
1answer
131 views

Word wrapping in tabulary not working with multicolumns

Why does this table overfull when I use multicolumns for the header? Without multicolumns the third column lines are wrapping, but not with multicolumns. \documentclass{article} \usepackage{...
1
vote
1answer
656 views

Wrapping text in tables

I have looked at previous queries of similar issues but the solutions don't seem to work for me (I am very new to LaTex so this is probably just me!) I am making a table which I want to fit within ...
8
votes
1answer
537 views

How do I “debug” LaTeX errors?

Consider: \documentclass[oneside,12pt]{article} \usepackage{tabulary} \usepackage{booktabs} \begin{document} \begin{table} \center \begin{tabulary}{22cm}{L C} \toprule \...
1
vote
3answers
633 views

Extend table width manually

Is there a way in which I could stretch the width of these tables? I do not need it to be necessarily the page's width. I have read the forums saying I should change to tabular* and put extracolsp{\...
-1
votes
2answers
331 views

How do you set max row height in tabulary

Ok, so I'm working with a sphinx-generated latex document and I'm trying to fix some of the rather ugly code - and generated output. I've got a table that doesn't split when it gets to the end of the ...
0
votes
1answer
122 views

How to Middle Align a vertical oriented text in Tables

This picture is a part of a table i am using, the terms subcases are vertically written but i cant center them vertically also in the next columns terms like A, B, etc are also not vertically centered....
0
votes
0answers
35 views

How Middle Align a vertical oriented text in Tables [duplicate]

This picture is a part of a table i am using, the terms subcases are vertically written but i cant center them vertically also in the next column terms like A, B are also not vertically centered. I ...
2
votes
2answers
12k views

how to make font size small in a tabular environment [duplicate]

\begin{center} \small \setlength\extrarowheight{0.01pt} \captionof{table}{Nomenclature} \renewcommand{\arraystretch}{1.3} \setlength\doublerulesep{.1pt} \begin{tabular}{ |p{2cm}|p{5cm}|} \hline \...
2
votes
1answer
36 views

Errors when typsetting a table with odd columns and row alignments

I am trying to typeset a table with "odd" (by my standards, please forgive my inexperience in these matters) columns and rows. Here is what I have thus far: \documentclass[12pt]{article} \usepackage[...
0
votes
0answers
59 views

Table numbering problem

How to skip the table counter for table 1 in ThreePartTable and ltabulary, like we use \begin{table*}? Below is my Code \documentclass[oneside]{scrbook} \usepackage{showframe} \usepackage{longtable}...