Questions tagged [tasks]
{tasks} is about the tasks package.
3
votes
1answer
37 views
Equally split the aligned items in tasks package
Problem
I am now updating my resume and I found tasks package is a good choice to list my research interests in the same line (which could save a lot of space). Even though I basically got what I ...
0
votes
0answers
39 views
xsim and questions in columns within tasks
I would do with xsim, successor of exsheets, the same I do with it: lists of questions inside a tasks environment.
Is that possible?
Something like this:
\documentclass{article}
\usepackage{...
8
votes
1answer
64 views
Remove punctuation from references to task counter
I'm using the tasks environment to spread a list across two columns. But the \ref command appears to carry punctuation with it differently than it does in the enumerate environment. I want to produce ...
6
votes
2answers
214 views
How to create a list in two columns with symbols label
Please consider this MWE:
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage[T1]{fontenc}
\begin{document}
{\scriptsize\begin{itemize}
\item Item 1
\...
2
votes
2answers
40 views
Too much vertical space after displayed math in tasks environment
Tasks package inserts too much vertical space after displayed math:
\documentclass{article}
\usepackage{tasks}
\begin{document}
\begin{tasks}
\task \[ X\rule{10cm}{1pt}X \]
\task \[ Y\rule{10cm}{...
1
vote
0answers
59 views
How to define choices instead of tasks and print answers at the end
I am trying to write some questions which are of objective or multiple choice format. The tasks package does the job except for two things:
Instead of \begin{tasks} and \task I want to write \...
1
vote
1answer
23 views
Item number not aligned with tasks
I have an alignment issue when using enumerate and tasks. Specifically, when I have a "blank" item with associated tasks, the item # and task # don't line up horizontally. Any suggestions would be ...
4
votes
1answer
66 views
Incompatibility between babel-french and tasks
There seems to be an incompatibility between these two packages.
Look at these two MWE:
The right one
\documentclass{article}
\usepackage{tasks}
%\usepackage[french]{babel}
\begin{document}
\begin{...
4
votes
2answers
132 views
Custom label for references using tasks inside a xsim exercise
In order to create an assignment sheet, I am using the xsim package and to create subquestions within a question, I use the package tasks. The problem comes while referring to the subquestions. ...
3
votes
2answers
68 views
How to italicize enumeration in task environment
Consider the following MWE:
\documentclass{article}
\usepackage{tasks}
\begin{document}
\begin{tasks}[label-format=\itshape](4)
\task Ex. 1
\task Ex. 2
\task Ex. 3
\task Ex. 4
\end{...
1
vote
1answer
108 views
How to define shorcuts for the tasks package with \def?
I tried to define the shortcuts
\documentclass{article}
\usepackage{tasks}
\def\bqcmt{\begin{tasks}(2)}
\def\eqcmt{\end{tasks}}
\def\myitem{\task}
\begin{document}
\bqcmt
\myitem This is a test
\...
2
votes
1answer
45 views
How to auto-fit a left-to-right list?
For instance,
\documentclass{article}
\usepackage{tasks}
\begin{document}
\begin{tasks}(3)
\task A
\task B
\task C
\task D
\task E
\task F
\end{tasks}
\vspace{1cm}
\begin{tasks}(5)
\task A
\task B
\...
0
votes
1answer
42 views
filbreak adds extra vertical space
I'm writing a book with a long list of questions. Most questions come in parts.
At the bottom of a page it breaks after printing the number of the problem but before printing the parts, which is ...
1
vote
1answer
28 views
tasks in enumerate: problem with baselines if lineheight too big
I'm using tasks (https://github.com/cgnieder/tasks) in enumerate.
If the line-height is encreased (eg by a formula) the baseline of the first task is not on the item-baseline:
\documentclass{article}...
2
votes
1answer
255 views
Using answers with tasks
I'm writing a book of maths problems. I need a way to present both the problems and their solutions at the end of the book.
I worked out a way to get the problems and answers to look just as I would ...
1
vote
2answers
61 views
Error when using fbox numbering with tasks package
When I insert "\renewcommand{\labelenumi}{\bfseries \fbox{\arabic*}}" in the preamble, I receive an error "! Argument of \boxframe has an extra }.\par \item" but it's good If I don't insert that. My ...
4
votes
0answers
96 views
TASKS package issue with TColorBox: unwanted carriage returns
The package TASKS is very useful for horizontal lists. However, when using Tasks lists inside TColorBoxes, Tasks behaves oddly, adding carriage returns when not necessary. Is there a way to restore a ...
1
vote
1answer
35 views
Changing tasks order
When I use tasks environment, I get
(a) item 1 (b) item 2 (c) item 3
(d) item 4 (e) item 5
Is possible to change the order to
(a) item 1 (c) item 3 ...
6
votes
2answers
90 views
Expansion issue in tasks package
I'm trying to switch from enumitem lists to tasks lists, but the following, which works in an ordinary enumerate environment, generates a "Something's wrong--perhaps a missing \item" error in the ...
1
vote
2answers
100 views
Bug between tasks and minipage and multicol and geometry?
I have noticed the following behaviour. I wonder if it is a bug or if it is normal.
\documentclass[a4paper]{article}
\usepackage{tasks, lipsum}
\usepackage{multicol}
\usepackage[hmargin=1.5cm]{...
2
votes
0answers
58 views
Strange behavior of `tasks` items inside `tcolorbox` box
I am drawing a fancy box around theorem environment using tcolorbox package. The content of the environment contain horizontal enumerate and I prefer tasks package. The default box setting work ...
0
votes
1answer
66 views
New environment using tasks
I'm trying to create a new environment:
\newenvironment{tasksx}{
\begin{tasks}[counter-format = (tsk[a]), after-item-skip = -.5ex, before-skip = -2.5em, after-skip = 1em]
\task
\end{...
5
votes
2answers
156 views
Measuring List Items in Tasks and Making Changes Accordingly
I made the following list for MCQs using taskspackage.
The problem is I need a command that can measure the contents of all the \tasks per question and determine the maximum width among them. And in ...
0
votes
2answers
53 views
How to keep number order with distinct environments?
in trying to make an enumeration like the following, when you can make a problem, but next, you can make a list of problems, i've been using them separately with the enumerate package, and with the ...
0
votes
1answer
62 views
Tasks Package Framed Label
Here I need the task package option that allows lists to be distributed horizontally in the order shown below. And I need the enumitem package option that let me wildly format the item labels.
Is ...
2
votes
0answers
93 views
Troubles with tasks package under TeXlive 2017 [closed]
I updated texlive 2017 yesterday and suddenly I cannot use the tasks package. Just writing \usepackage{tasks} made pdflatex, lualatex and xelatex stuck for hours.
\documentclass[11pt,a4paper]{article}...
0
votes
1answer
225 views
Is it possible to use a task inside another task environment?
I am trying to put a task inside another task environment (I am very impressed that nobody has asked this), but it does not work:
\begin{tasks}(1)
\task Task a)
\task Task b)
\begin{tasks}...
2
votes
3answers
89 views
How to create a horizontal list that is centered?
I'm trying to recreate the below image where the defining of the variables is kind of like a horizontal list but without labels. I have tried using tasks and multicols but can't quite figure this out.
...
5
votes
1answer
138 views
Automatic blackening out answers based on a single comment
I am designing question papers comprising of multiple choice questions. The answers are to be marked by blackening the appropriate answers (more than one may be correct) in an answer sheet. In my ...
3
votes
2answers
108 views
Task environment and answer package clash
Use of task environment inside my moquestion environment (as below) changes the item-labelling (1., 2., 3., etc) of the solution. In the mymosolution environment, the item-labelling is replaced by (D) ...
0
votes
1answer
77 views
TIPA Centering textipa in tasks list
I would like to center textipa in task list how can i do that ?
by the way i added centering but with no luck
\documentclass{article}
\usepackage{tipa}
\usepackage{tipx}
\usepackage{tasks}
\begin{...
3
votes
1answer
63 views
tipaman and tasks packages don't goes together
I would like to use the tipaman package with tasks but it's seems they don't goes together. What can I do in this case since I'm looking for left to right alignment of the individual items?
\...
6
votes
2answers
149 views
Geometry margin causing tasks alignment issue
For some reason, if one sets a margin using the geometry package, this causes an alignment problem with the tasks package:
MWE:
\documentclass[12pt]{article}
\usepackage{amsmath,geometry,tasks}
\...
0
votes
1answer
94 views
Nesting Tasks within an xparse Environment
I need to use xparse as I am passing multiple optional arguments through a custom environment (not shown here for brevity). When I attempt to pass the following:
\documentclass{article}
\usepackage{...
1
vote
1answer
99 views
Format tasks like (a) instead of a) globally
I am still relatively new at Latex, but I have exhausted this site, list/enumerate/task documentation, and many other googled resources. Apologies if this is a duplicate question.
I have a need to ...
4
votes
2answers
290 views
Why are A, B, C, and D not aligned? (tasks in beamer)
\documentclass{beamer}
\usepackage{tasks}
\begin{document}
\begin{frame}[allowframebreaks]
$1+1=$(\makebox[2cm]{})
\begin{tasks}[counter-format = tsk[A]. ](2)
\task one
...
0
votes
1answer
285 views
Change a enumerated list to horizontal with Tasks
I have spesicif list I need to change into a horizontal alignment. I thought of using the tasks package, but can not figure out how to do it. Here is the list:
\documentclass[12pt,numbers=noenddot,...
3
votes
1answer
192 views
Starting tasks inside of enumerate causes text overlap
I'm trying to create an answer key using the tasks environment (I had previously used a combination of enumerate and multicols). Basically, I want the answer key to look like this:
\begin{enumerate}
...
2
votes
1answer
650 views
Manually label in Task package
I want to manually label inside the \task environment. For example (a) and (b) are subquestions of 1 so I want to label them (1a) and (1b) respectively. Here is my MWE:
\documentclass[12pt, a4paper]{...
2
votes
2answers
175 views
tasks environment vs. pgffor's foreach
I want to \foreach on a list and create task (via package tasks) inside a question. A MWE:
\documentclass{article}
\usepackage[magyar]{babel}
\usepackage[utf8x]{inputenc}
\usepackage{t1enc}
\...
1
vote
2answers
131 views
Trouble aligning task to includegraphics
I am making a paper for students and I have the following code.
\documentclass{article}
\usepackage{mathtools}
\usepackage{graphicx}
\begin{document}
\begin{enumerate
\item In the figure, both \(...
3
votes
1answer
632 views
\tasks \alphalph
I need to give a huge list of matrices to diagonalise. I read this answer, but I can't figure how to make it work.
Here is my code, in fact, I have many more matrices.
\documentclass{article}
\...
1
vote
0answers
209 views
How to write Mongolian character use task
I have a problem. I write use tasks in LaTeX. But list is ABC of English.
How i write Mongolian Character that list.
MWE:
\documentclass[10pt]{book}
\usepackage[utf8]{inputenc}
\usepackage[...
4
votes
0answers
137 views
tasks package: items are in two line with 4 columns and 4 items
I write some choice questions into beamer frame, after some research, here is my code:
\documentclass[aspectratio=169]{beamer}
\usetheme{Berkeley}
\usepackage{tasks,CJK}
\begin{document}
\begin{CJK*}{...
0
votes
1answer
754 views
Figure next to a list
I would like to place a figure next to a list, this the best I got. I have no idea how to do it.
\item Identify
\begin{tasks}[counter-format =(tsk[1]), label-offset=1.25em](2)
\task $f(-...
0
votes
1answer
62 views
make integral symbol big using tasks package to make a list
I am trying to make am horizontal list using tasks the probem is integral symbol is too small. How can I make it big without affecting the horizontal list
\begin{tasks}[counter-format =(tsk[1]), ...
2
votes
2answers
217 views
counter name for NewTasks environment
I'm using tasks (as a subset of exsheets) to create environments exer2 and exer3 which organize exercise sets in a calculus workbook into rows and columnns. I am also using the exsheets environments ...
3
votes
1answer
374 views
Problem using answers and tasks packages
I am trying to create questions (using answers package) with several subquestions using the tasks package. Each question has a solution wich is to be typeset at the end of the document using ...
2
votes
1answer
173 views
Can tasks be used to make a list with \itemindent = \labelwidth + \labelsep
My question will use terms from the diagram below.
Using the tasks environment from the tasks package, is it possible to make lists where \itemindent = \labelwidth + \labelsep? The objective is to ...
3
votes
1answer
904 views
\verb illegal in command argument in task
Following this: Make two-columned list start at same line as its section, I did:
\documentclass{article}
\usepackage{cprotect}
\usepackage{tasks}
\begin{document}
\section{Languages}
\...
