# Questions tagged [tikz-angles]

This tag is for the TikZ angles library.

43 questions
Filter by
Sorted by
Tagged with
433 views

### How do you slant angle labels to match a diagram?

I saw the image below and noticed that whoever made it slanted the angle label to match the slant of the perspective. I think this is a really nice effect that very effectively labels angles in 3 ...
667 views

### Dimension too large error (apparently no calculation involved)

From what I have read so far, a Dimension too large! is caused by a result or an intermediate calculation that goes beyond the limit of 16384. I get this error with this document (note: the ...
357 views

### how to draw the angle bisector of a triangle

\documentclass{book} \usepackage{tikz,amsmath,amssymb,tkz-euclide} \usetkzobj{all} \usepackage{color} \usetikzlibrary{positioning}% To get more advances positioning options \usetikzlibrary{...
220 views

### How to add a white background to an angle label in Tikz?

I'm drawing a diagram for a project, but with the n vector going through the angle label it isn't very clear, I'd like to add a white background to the alpha label so it's easier to see. Thanks, see ...
4k views

### how to draw a phasor diagram (like this picture)

Hi, I would like to draw this phase diagram as in the attached picture. But some examples I see in the internet are so different (more complex) and when I choose one way to follow I don't know how to ...
229 views

### How to draw with Tikz a chord parallel to AC that passes through a point?

I've drawn the following diagram with Tikz: The code used: \documentclass{standalone} \usepackage{pgf,tikz} \usetikzlibrary{babel,calc,arrows,shapes.geometric,intersections,through,backgrounds} \...
467 views

### Add an angle to a sphere

I have a sphere (taken from http://www.texample.net/tikz/examples/, credits to Bartman): % Steradian cone in sphere % Author: Bartman \documentclass[tikz,border=10pt]{standalone} %%%< \...
891 views

### Tikzpicture: Add slope angles to straight line

I am trying to add some angles between the x-axis and the red and blue line which indicate their slope. \documentclass[15pt,a4paper,headinclude, totoc]{scrartcl} \usepackage[usenames,dvipsnames]{...
139 views

### Problem when including a foreach loop

I have the next code which makes exacty what I wanted, that is, to plot the triangle and show the values of every interior angle. \documentclass{standalone} \usepackage{tikz}\usetikzlibrary{angles,...
408 views

### The curvature of a circular arc is backwards

The curvature of the circular arc indicating the angle at ∡OPR is backwards. The command that I used to draw it is the last line in the code. \documentclass{amsart} \usepackage{amsmath} \...
265 views

### \pic without named coordinates

Is it possible to use the \pic command provided by the angles library in tikz, without using coordinates? If I use something like this, it works correctly. \begin{tikzpicture} \coordinate (A) at (...
2k views

### Various questions on the pic command from the Tikz angles library

I have a few questions regarding the pic command from the tikz.angles library that I am trying to experiment (the documentation in the Tikz-pgf manual remain very obscur to me). So here is one bit of ...
2k views

### How to draw the right angle symbol (square) with a dot in the center?

I'm trying to reproduce the following picture. I've already searched, but I don't find with the dot in the center, and I have to reproduce this notation many times. EDIT: here is what I got until ...
173 views

### How do I mark an angle with multiple arcs?

I have been trying to find a good answer to this question (or a question to match it): I'm trying to give an angle a marking with multiple arcs in the interior, as per the pictures below. I'm not ...
4k views

### TikZ: using the angles library

I am trying to use the angles library, but I am not sure how to apply it when the nodes were specified from other methods. In the examples, the drawing of the vectors and naming of the nodes happens ...
168 views

### Drawing an angle via \pic doesn't work

I want to draw an angle between two points, but for some reason TexStudio can't find tikz's \pic function (though I imported the 'angles' library). Here is my code: \documentclass[12pt, a4paper]{...
312 views

### How to get \lewis or \Lewis (in chemfig) to have custom angles and not just 0-7?

I'm drawing a molecule (p-anisaldehyde) in which one of the bonds is at a 60 degree angle and the atom at the end is inside \Lewis{}. I would like to have the two electron groups on the end atom to be ...
420 views

### How to scale an angle's label with TikZ?

I would like to be able to scale the label of this angle: Code: \documentclass[a4paper,12pt]{article} \usepackage{siunitx} \usepackage{tikz} \usetikzlibrary{angles, quotes} \begin{document} \...
304 views

### How to double, or triple an angle mark's decoration with TikZ?

I would like to decorate an angle's mark in a similar way as in this picture (taken from this question): From this answer I could build this: \documentclass[a4paper,12pt]{article} \usepackage{tikz} ...
118 views

### Exterior Angle is Being Labelled Instead of Interior in Tikz?

So, after much painstaking research (for something that one feels should be simple) I figured out how to make angles in diagrams! The package I'm using is tkz-euclide, which seems simple enough to ...
246 views

### Package pgfkeys error with angles and quotes library: I do not know the key '/handlers/first char syntax

I am trying to draw a simple picture using angle and quotes libraries. \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{3d,calc,quotes,angles,patterns} \begin{document} \begin{...
229 views

### How to extend shading in this figure?

The following figure is meant to be a contour graph. How can I extend the current shading out to the rest of the figure, so that there is shading between all of the lines? Here is the the figure and ...
872 views

### Draw angle between two line

I try to represent a complex number in a Gauss plane. The problem is in the representation of the angle between the abscissas and the oz segment. This is my code: \documentclass{scrbook} \input{...
347 views

### How can I put the angle more right than I put here? And how can I make a subtitle also?

Is it possible to adjust the angle more than I did: [ABOVE RIGHT] \draw [black, thick] (0.7,0) arc [start angle=0, end angle=110, radius=0.7cm] node [above right] {$\theta=\phi-\ang{90}$}; I'...
269 views

### tikz: coordinate arithmetic when drawing an angle

I can draw an angle like this: \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{calc, angles} \begin{document} \begin{tikzpicture} \coordinate(O1) at (1, 1); \coordinate(O) at (1, 0); ...
160 views

### Placing a node label in a specific location

I need the \alpha_1 to be a bit close to the corner, it should be placed "nicely". I tried the following code (with various numbers in label distance/angle): \documentclass{article} \usepackage{...
84 views

### Can't increase radius for angle between two lines

I want the angle label gamma to have a larger radius, but the radius parameter won't change anything. Here is my code \documentclass[]{article} \usepackage{tikz} \usetikzlibrary{backgrounds} \...
922 views

### TIKZ Tree: Change angle between Nodes

I am struggling to find out how to change the angle between nodes in tikz trees. I have already tried the attribute sibling angle=... specifically for child nodes or as level 1/.style=... attribute at ...
39 views

### Drawing an angle that should not cross over an intermediate line

I want to draw an angle arc using the angles tikz library. This arc has to not cross over an intermediate line between its limits. I try to use the knots package but it doesn't seem to work well with ...
660 views

### Manual of the angles tikzlibrary [closed]

I would like to learn some commands of the angles tikzlibrary. I have been looking on the internet for its manual but so far I couldn't find any documentation. Can anybody help me please? Thank you so ...
868 views

### Feature diagram in LaTeX?

I would like to "translate" this diagram (a "feature model" or "feature diagram") into LaTeX. In particular, I didn't found how to draw arrows with a filled angle between them. Thank you for your ...
128 views

### Drawing angles on a diagram in Tikz using the angles library

I've recently been trying to learn Tikz, and I've constructed a diagram to use for my dissertation, to help show a vector being split into components that are parallel (v_b) and perpendicular (v_g) to ...
38 views

### use two optional arguments for the angle label without xparse package

I'd like to use my macro \angs for draw the angle label. I first tried the following code, it has some problems. \usetikzlibrary{quotes,angles} \tikzset{ ar/.style={angle radius=#1}, ar/.default=...
63 views

### Chalenge in tikz

I'm working on a aerodynamic proyect and i have to do something like this in the report. I'm just interesed in the vectors, not in the airplane. How can I do to make a tikz picture to be as similar ...
85 views

### Fill angle text in TikZ

I have an angle on a nonuniform background (here simplified as a blue background) making it difficult to read the text of the angle. I would like to give the text of the angle a half transparent white ...
91 views

### newcommand for rotation the mark angles automatically when use angle tikzlibrary

I want to modify command \Angle which the mark angles auto rotation (see the appropriate). \documentclass{article} \usepackage{tikz} \usetikzlibrary{quotes,angles} \newcommand{\Angle}[...
18 views

### Problem with using \pgfmathprintnumber to get just two decimal positions when printing the angle between two lines

I want to print, in degrees, the value of the angle between two lines. Everything works fine for me when printing the whole angle between the lines: \documentclass{standalone} \usepackage{tikz} \...
61 views

### Labelling Vertex with Arrows in Tikz

I know this question has been asked heaps of time here, but I have already looked at quite a few answers and still for some reason I have not been able to get it to work. Below is my code and output: ...
1k views

### error when using tikz with quotes and angles

i want to draw some angles using tikz where i have the following code: \documentclass{article} \usepackage[ngerman]{babel} \usepackage{tikz} \usetikzlibrary{quotes,angles} \begin{...
68 views

### TikZ: Labeling an angle does not work in my case

I'm trying to draw a simple coordinate system using TikZ. I've also got an angle which I want to label as phi (\varphi). The following code without the label works: \documentclass{standalone} \...
95 views

### Grid and label in a coordinate with a different angle betwenn the axis

I have drawn a coordinate with an angle of 30 degrees betwenn the x- and the y- axis like this: \documentclass[border=3mm,tikz]{standalone} \usetikzlibrary{arrows} \begin{document} \newcommand{\...