Questions tagged [tikz-feynman]
{tikz-feynman} is for questions relating to the TikZ-Feynman package.
1
vote
1answer
31 views
How do I set a label on a propagator using tikz-feynhand?
I'm trying to draw a Feynman diagram using the tikz-feynhand package, but I'm having trouble setting labels on the lines it draws.
The following works fine to draw the lines with no labels:
\...
1
vote
1answer
36 views
How to move the labels?
I want the intermediate labels to be on the right or left (outside the diagram). How can I do it the simplest way? Here's my code
\feynmandiagram[horizontal=a to b]{
i1 [particle={\(\Xi^0\)}] -- [...
2
votes
1answer
47 views
How to draw a two-meson exchange feynman diagram in latex?
I wrote this in LaTeX with tikz-feynman, but it does not compile:
\begin{figure}
\centering
\feynmandiagram[horizontal=a to b]{
i1 [particle={\(\Lambda\)}] -- [fermion] a [crossed dot] -- [fermion] ...
4
votes
0answers
62 views
Egg-shaped Feynman diagram
I was trying to answer tikz-feynman: edge labels when I encountered an odd problem:
Why is the first diagram slightly egg shaped? Without the lines left and right it is round. Please don't tell me ...
3
votes
1answer
160 views
tikz-feynman: edge labels
I would like to understand how can I label edges of diagrams as at this picture:
I assume that it possible to label vertices and than move each label, but I do not know how. Can anyone gives some ...
3
votes
1answer
33 views
Feynman diagram: sides switched
In my t-channel Feynman diagram (with tikz-Feynman), the lower two particles of the t-channel are switched. It appears that for s-channel, the right hand side particles are switched too.
Code for t-...
0
votes
0answers
38 views
Horizontal oriented Feynman diagram with loop is not produced horizontal
I tried to make a simple first order loop diagram of a photon with a virtual fermion loop. This works, except from the last horizontal photon (wavy) line. This is the syntax I used with the tikz-...
0
votes
0answers
94 views
Very common question: Feynman Diagrams in LaTeX
I know about a lot of solutions how to draw Feynman diagrams in LaTeX. Unfortunately, noone of them is perfect. I know about TikZ-Feynman and it is the best variant (may be) but I do not understand ...
0
votes
1answer
51 views
Specific feynman diagram [closed]
I am very new to TeX and wanted to draw these diagram using Tikz-Feynman or some package.
2
votes
1answer
121 views
Rendering problem with TikZ Feynman
I would like to draw feynman diagrams with Tikz Feynman but I have some rendring problem :
Here the file with the first exemple of the documentation
\documentclass[11pt,french,letterpaper]{article}
\...
2
votes
0answers
83 views
Wrong direction of vertices in tikz-feynman remains under macOS, using PGF 3.1 and luatex 1.07 [duplicate]
This question is originally from the discussion under github issue CTeX-org/forum#4.
The similar problems raised by questions
Fresh install of TL2018: no tikz graph drawing libraries found, and
...
2
votes
1answer
87 views
Tikz-Feynman plots messed up in Texstudio
I try to compile the following file -
\documentclass[]{article}
\usepackage{tikz}
\usepackage[compat=1.1.0]{tikz-feynman}
\begin{document}
\feynmandiagram[inline=(b),vertical=a to b, green!40!black] {...
2
votes
1answer
52 views
Global set insertion style in Tikzfeynman
How to globally set insertion style using tikzfeynmanset?
I tried
\tikzfeynmanset{
every insertion/.style={
/insertion/style={thick},
},
}
but it won't work.
MWE:
This is what ...
4
votes
1answer
420 views
Updated lualatex vs. tikz-feynman
ORIGINAL QUESTION: I have major problems compiling Feynman diagrams produced with the tikz-feynman package with lualatex. To make it less likely that I am just sloppy, I copied the example from this ...
0
votes
1answer
108 views
How can I do this Feyman diagram with tikzfeyman in latex?
So I was wondering if anyone could provide input as how i can do this diagram in latex with tikzfeymann package. Thanks!
this is pretty much what I got
\feynmandiagram [large, layered layout, ...
1
vote
1answer
45 views
environment mode not working
Two problems I am facing. Its not numbering and title is not showing up.
Please help.thank you.
\begin{frame}[t]{Field Strength Renormalization}
\begin{equation}
\[
\langle \Omega \rangle
=
\begin{...
4
votes
1answer
72 views
Vertex styles not being displayed in loop diagram
I have the following source for a tikz-feynman diagram:
\documentclass{standalone}
\usepackage{tikz}
\usepackage[compat=1.1.0]{tikz-feynman}
\begin{document}
\begin{tikzpicture}
\begin{feynman}
...
3
votes
1answer
224 views
Two-loop electron self-energy with TikZ-Feynman
I want to draw a simple self-energy two-loop graph such as
using TikZ-Feynman. I have a problem with the automatic alignment of the fermion lines. I have tried this:
\feynmandiagram[inline=(a), ...
2
votes
1answer
55 views
Defining a macro for feynman diagrams
Consider the following MWE where I define a macro to generate triangle Feynman diagrams with three inputs:
\documentclass{article}
\usepackage{amsmath,amssymb}
\usepackage{physics,tikz-feynman}
\...
2
votes
1answer
103 views
Tikz overlay not working as desired in beamer
Consider the following MWE:
% !TeX program = lualatex
\documentclass{beamer}
\usepackage{tikz-feynman}
\usetheme{metropolis}
\title{A minimal example}
\date{\today}
...
1
vote
1answer
89 views
Modifying an edge in a Feynman diagram generated by tikz-feynman
Consider the following Feynman diagram:
% !TeX program = lualatex
\documentclass[a4paper,10pt]{article}
\usepackage{amsmath}
\usepackage{tikz-feynman}
\begin{document}
\begin{center}
\feynmandiagram ...
1
vote
1answer
194 views
Specific Feynman Diagram TikZ-Feynman Drawing [closed]
I'm new to Tex. Please help me with the coding to draw these 5 diagrams in LATEX.
5
votes
1answer
258 views
Hartree diagram with tikz-feynman (just a circle as propagator)
I would like to draw the Hartree diagram like that:
(actually only the right hand side, but that doesn't matter)
My attempts end up like this:
\documentclass[tikz]{standalone}
\usepackage[compat=1....
1
vote
1answer
191 views
Loop along a line in tikz-feynman
In tikz-feynman, I want to draw a curved arc between two points, and then attach a loop to this. Here is an extremely hack version I did as a stopgap:
\documentclass{article}
\usepackage{tikz}
\...
0
votes
1answer
44 views
Trying to get the right arrow head on my Feyman diagram
So this is the code that genreates the image below. I am trying to get the pointed arrows on the fermions but I have no idea why is not working wit particle. Any help will be appreciated.
\...
2
votes
1answer
73 views
Background colours in tikz picture containing tikz-feynman
I am trying to split the background colour of the Feynamn diagram below into 2 different colours with (for example) red in the top half and green in the bottom half. Note that both horizontal lines ...
1
vote
1answer
249 views
Vacuum bubbles in tikz-Feynman
I want to draw $\phi^4$ theory vacuum bubbles. The simplest one is the "figure eight", and the documentation does not refer to such diagrams at all. I can't find a way to manually set vertices and ...
0
votes
1answer
1k views
Using tikz with Miktex and TexStudio
So I am using latex for submitting my homeworks, and I am struggling for hours now, just to draw some Feynman diagrams. Here is how I proceeded:
Install tikz-feynman from Miktex. Texstudio refuses to ...
0
votes
1answer
42 views
Trying to create a mid vtx with two fermions (Tiks-Feynman)
So i've been working hard over the past 7 hrs and I am at the point where Tiks-Feynman needs improvement or I just don't get it. This is most likely my 4th question in this forum and I feel real ...
0
votes
1answer
212 views
Trying to put Feyman Diagram side by side horizontally w/ “+” in between.
So i've been trying several threads in this forum on how to make my feynman diagrams look side by side. The problem is that no thing seems to work, this is how my two diagram look:
and this is my ...
2
votes
1answer
76 views
Need help with making a Feyman Diagrams with \feynmandiagram to make triple or more arrows very close to eachother
so I've been trying to make the following feyman diagrams:
My code looks like this for the first diagram attempt , so far this is what've got:
\begin{figure}[H]
\centering
\feynmandiagram [...
0
votes
1answer
68 views
TikZ-Feyman help with a particular Diagram
Hello i am trying to make a Feynman diagram with this code
\bigskip
\begin{figure}[H]
\centering
\tikzfeynmanset{
every vertex={red, dot},
every particle={blue},
every blob={draw=green!40!black, ...
2
votes
2answers
143 views
how to align these diagrams
i am trying to align the left hand text with right hand diagram.but its not working.if i use \feynmandiagram[baseline] it can be done.but if i manually adjust my diagram it is not working.heres an ...
1
vote
1answer
177 views
vertex naming is not working in tikz-feynman
I want to name the left and right hand vertex x and y.but it is not working.
\usepackage{tikz-feynman}
\usepackage[compat=1.1.0]{tikz-feynman}
\usepackage{simpler-wick}
\usetikzlibrary{calc}
\begin{...
0
votes
1answer
140 views
Wick contraction help
i am trying to reproduce these contractions of peskin.But none of my code works.
please help me out here.thank you.
\documentclass{beamer}
\usepackage{amssymb}
\usepackage{amsmath}
\usepackage{...
0
votes
1answer
320 views
tadpole diagram using tikz-feynman
I want to draw the diagram with one loop. But my latex code is not working.
let me be more specific
\documentclass{beamer}
\usetheme{Warsaw}
\usepackage{mathrsfs}
\usepackage{braket}
\usepackage{...
1
vote
1answer
161 views
Tikz-Feynman: Putting multiple boson loops into each other
I was trying to draw a Feynman diagram of a quark propagator in rainbow ladder truncation when I encountered a problem.
I need to draw multiple gluon loops within each other. Drawing one gluon loop is ...
0
votes
1answer
151 views
Tikz-Feynman Diagram holding on Compile
I am trying to compile a standalone Feynman Diagram, but when I attempt to compile, it holds on compilation, and when the typesetting process is aborted on the GUI, the process is still running on my ...
1
vote
1answer
281 views
TikZ-feynman: Changing the angle at a vertex
I want to draw a feynman diagram for the quark Dyson-Schwinger equation using the Tikz-Feynman package. I have the problem that I can't draw a fermion line that is straight even after a vertex. I have ...
1
vote
1answer
92 views
Tikz Feynman Delbruck Scattering
I'd like to make a Delbruck scattering diagram with Tikz-feynman but for some reason my code wont compile, its blowing up my CPU and eventually memory. Have I written something wrong, is there a ...
3
votes
1answer
445 views
TikZ-Feynman: Orientating diagram horizontally [duplicate]
I want to make a Feynman diagram using the Tikz-Feynman package, that is aligned horizontally. The command I use looks like:
\documentclass{book}
\usepackage{tikz-feynman}
\usepackage{tikz}
\...
1
vote
1answer
127 views
Tikz Feynman fit a line inside a loop
I am trying to write a two loop Feynman diagram in a particular format (using pdflatex!), basically with a line dividing in half a loop.
Unfortunately while the outcome in the image below is almost ...
2
votes
1answer
106 views
change aspect ratio of TikZ-Feynman diagram
I have a tikz-feynman diagram that has a wide aspect ratio, and I'd like to change the aspect ratio to be more square.
cascade.txt:
\documentclass[tikz]{standalone}
\def\axisdefaultwidth{12cm}
\def\...
0
votes
2answers
151 views
Positron - Photon feynman diagram
I made a simple Feynman diagram of the channel S=(k1 + k2)^2 in the Positron - Photon scattering as follows
\feynmandiagram[horizontal=a to b]{
i1 [particle=\(\gamma\)]
-- [photon, ...
2
votes
1answer
570 views
How to adjust momentum arrows in TikZ-Feynman
I'm trying to create a Feynman-Diagra using the TikZ-Feynman package in Latex.
Is there anyway to adjust the position of the momentum arrows in TikZ? Right now the two momentum arrows of the photon ...
1
vote
1answer
201 views
tikz-feynman diagrams inside align* environment produce an error
I'm trying to typeset an equation in which there are a lot of Feynman diagrams, which I draw with tikz-feynman, as in the example I pasted below.
When I compile, it halts at the first tikzpicture, ...
2
votes
0answers
74 views
Tikz-Feynman: Particles overlap and appear at only one external leg
#
I am facing trouble with the tikz-feynman package that I have recently installed. I am currently using LuaTex as the engine in TexLive. Also, I am using a non-English language, so I am using ...
1
vote
1answer
278 views
Move arrow away from the middle of the line in a fermion line
I'm trying to draw the following diagram with the tikz-feynman package.
\documentclass{standalone}
\usepackage{tikz-feynman}
\begin{document}
\begin{tikzpicture}
\begin{feynman}
\vertex [...
3
votes
2answers
823 views
feynman diagram with two loops and bigger dots tikz feynman
I am trying to draw Feynman diagrams with two loops. I have managed to draw the following one:
\documentclass[DIV=14,headsepline]{scrartcl}
\usepackage[T1]{fontenc}
\usepackage[utf8]{luainputenc}
\...
1
vote
0answers
137 views
Problems with tikz-feynman
I would like to do a figure that looks like this (using tikz-feynman):
but it simply won't work. This is the best I can actually do:
\documentclass[11pt,french,letterpaper]{article}
\usepackage{...
