Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [titles]

{titles} is about typesetting document titles, usually with the help of \maketitle or the titlepage environment. A popular package is {titling}.

0
votes
0answers
36 views

How can I add thickness to a line?

I have this title with two lines surrounding it. \title{\line(1,0){350}\\Whatever\\\line(1,0){350}} I want to adjust thickness to these lines and I tried playing with numbers in the parentheses but ...
3
votes
1answer
40 views

Titling: Unwanted Font Change in scrbook

I can't figure out why the "maketitle" font uses a different font than the selected global document font. The reason why I used the "maketitle" title is to be able to use the \lowertitleback command ...
0
votes
1answer
28 views

add a horizontal rule below the title with length start end thickness

I'd like to add a segment rule with a certain thickness below the tile. It does not cover the full page or the full title length and I can control its thickness. I am using \maketitle to do the title ...
0
votes
0answers
29 views

maketitle in cls - override \rubricwidth from tex file

Can I override the properties in a cls file from a tex file? The \maketitle function of a cls I have to work with squeezes most of the title page into half the page width. I would like to change ...
0
votes
1answer
33 views

How to remove Indent while using book document class

while working on a project I noticed that some pages have a slight indent over the pages above them. you'll notice that all text on page 12, for example, is slightly more indented than page 11. I ...
1
vote
1answer
30 views

Want to add an image with the Title

This is my code for the title: \title{ \usefont{OT1}{bch}{b}{n} \normalfont \normalsize \textsc{ABC Summer Research Programme} \\ [25pt] \horrule{0.5pt} \\[0.4cm] \...
0
votes
0answers
16 views

Problem with \maketitle and \affil (authblk package) [duplicate]

**edit: Thanks to the help of a colleague of mine, I found the solution. Thanks to all the helpers. here is the link: Multiple authors in a Journal style (llncs) Document I'm using TeXstudio and wish ...
1
vote
1answer
28 views

fancyhdr is only appearing on the titlepage

I'm trying to get a small image into the footer of my report. I found online that the best way to do this is by using the fancyhdr package. I thus included following code into my main.text document, ...
0
votes
1answer
11 views

Abstract come before title after `\maketitle`, how to correct

Why does come abstract before title in this example? And how to enforce the correct behaviour (title, authors, affiliations, abstract, such as in elsarticle?) \documentclass[a4paper,12pt]{article} \...
0
votes
1answer
27 views

Add a document name, while using an external document reference

I'm using xr package for referencing to external documents. I want to add external document title to a reference. How it could be obtained?
0
votes
1answer
29 views

Customising the Koma scrartcl maketitle environment

Below is an MWE for an scrartcl document. I'd like to customise the output of \maketitle, in particular to place the title elements left-aligned instead of centred, and to change the fonts and sizes. ...
1
vote
0answers
21 views

Change the font color of abstract and acknowledgements titles?

I have managed to change the font color of all my titles in my thesis, i.e. chapters, sections, subsections by using: \definecolor{MyBlue}{RGB}{0,47,135} \chapterfont{\color{MyBlue}} \sectionfont{\...
1
vote
1answer
123 views

packages titlepage & biblatex don't work together

the following code works well: \documentclass{scrbook} \usepackage[british,ngerman]{babel} \usepackage{blindtext} \usepackage{titlepage} \begin{document} \begin{fullsizetitle} \blindtext[13] \end{...
3
votes
1answer
45 views

Reformat footnote mark for \thanks, but not for other footnotes

I have a piece of complex code from Use same formatting for \thanks footnote as the one created by footmisc which makes sure that \thanks doesn't place a star in the the title, only in the footnote ...
0
votes
1answer
22 views

Change font in `quotechap` chapter number

Say, with this MWE: \documentclass{book} \usepackage[]{quotchap} % <- option other than avantgarde, beramono, berasans, beraserif, biolinum, bookman, charter, courier, helvetica, kpfonts, ...
0
votes
0answers
26 views

How do I change the colour of my title in Baposter in latex?

I am making a poster using the baposter document class. The background of my poster is dark, and since the title is black by (default), the title is very hard to read. I would like to make my title ...
3
votes
2answers
58 views

Unable to use \thanks for one author

EDIT 2: My question was indeed a duplicate or otherwise clouded in some of my own misunderstanding. Apologies for the inconvenience. EDIT: This question was closed as a duplicate, but the thread ...
0
votes
0answers
22 views

Many authors in the title, maketitle error

I am compiling a document that has >40 authors and >40 affiliations. So naturally, it has to span over one page. It compiles, though throws errors such as "Missing $ inserted", "No line here to end", ...
1
vote
1answer
22 views

modify change title position and color

I'd like to reproduce something similar to the Title, Authors/affliation and Date look, position and size of the cpi report as in https://www.overleaf.com/latex/templates/climate-policy-initiative-...
0
votes
0answers
18 views

Bar behind section title spanning the width of the page

Is there a way I can use the titlesec package or the mdframed package to produce a section heading like the following: Here, the section title box begins at the left margin. As a followup question, ...
1
vote
0answers
22 views

Nomenclature Header

I'm printing the Nomenclature of my document after my appendix. However, the header of my Nomenclature shows the title of my last appendix and I can't figure out why. This is a sample of my main ...
2
votes
1answer
27 views

How to remove author from sbc-template?

I need use the sbc-template template to submit without author information, but the template throws an error when I comment the \author command, and when I use \author{} a ¹ is printed below the title. ...
1
vote
1answer
44 views

How to move the address of authors in the footnote of the first page?

I want that the address will be in the footnote of the first page \documentclass[12pt,reqno]{amsart} %------------------------------------------------------------ \usepackage{etoolbox} \...
2
votes
1answer
22 views

Subtitle appearing in Acm Reference Format

I'm writing an article for ACM Conference and I'm using portuguese as main language. In this specific Conference they allow it but I have to write two titles, the first in english and the second in ...
1
vote
1answer
37 views

Cannot use \tex inside of \title{…}

I cannot use \tex inside the \title{...} since it fails on the \maketitle command. When I remove the \tex, the file is built correctly. \begin{titlepage} \title{ \normalfont ...
2
votes
3answers
51 views

Right aligned Title with image on the left

I want to make a title that will follow the following structure: \documentclass[12pt]{article} \usepackage[pass,showframe]{geometry}% just to show the page margins \usepackage[demo]{graphicx}% ...
1
vote
1answer
26 views

Company name not in a single line

I am trying to get the output of this Latex code but, my company name is not coming in a single line if I use the \Huge relative font size. \documentclass[14pt]{article} \usepackage{pagecolor,lipsum} ...
0
votes
1answer
47 views

Title and a text without any space

I have definend "title" of subsub section as following: \def\podpodsekce#1{\leavevmode \\ \textbf{#1}\\ \\} the problem is that sometimes the title is on the bottom of a one page and the text is on ...
1
vote
2answers
65 views

How to draw a box around page title or get page title's size?

I either need to draw a box around \title (to see how much space there is between the title, first line of text on the page [below the title], and top margin of the page [above the title]) or measure ...
0
votes
1answer
26 views

Removing the title from slide

I am trying to make a presentation. I want to remove the very long title which appears as the footer of every slide. How do I do it? I have used the following code. \documentclass[english,svgnames,...
1
vote
1answer
25 views

Custom `maketitle` definition in report

Following this answer I'm trying to customize the cover of a report, which works fine for articles, but doesn't seem to work for reports. For example: \documentclass[a4paper,12pt]{article} \...
2
votes
1answer
33 views

Alignment issue in a titlepage

Here is what I am trying to achieve, but I am getting this, with this syntax, \documentclass[14pt, a4paper]{article} \setlength{\oddsidemargin}{0.5cm} \setlength{\evensidemargin}{0.5cm} \...
2
votes
1answer
44 views

tex4ebook or tex4ht: optional arguments for \title not supported

Sample code: \documentclass{amsart} \begin{document} \title[Short]{Long} \maketitle Hello \end{document} compiled with tex4ebook, the optional argument of \title is mistakenly proceeded (the ...
1
vote
1answer
43 views

Centering parts at KOMA-Script

As a continue to this question: How to center headings at KOMA-Script I'm trying to center the parts... MWE: \documentclass{scrartcl} \usepackage{adforn} \setkomafont{part}{\itshape} \renewcommand\...
1
vote
1answer
32 views

Changing Color of Author Thanks in Document

Let's say you have the following title in mwe.tex: \documentclass{article} \title{Sample Title} \author{John Doe\thanks{email}~ and Jane Doe\thanks{twitter}} \date{\today} \begin{document} \...
1
vote
1answer
14 views

Vertical space around title

I'm trying to draw horizontal lines above and below the title and adding some extra space between them and the text. I've being trying this code: \documentclass{article} \usepackage[utf8]{inputenc} \...
0
votes
0answers
19 views

Disable page numbers for title page and toc in combine

I am preparing a collection of contributions for an upcoming conference. using the combine package. It seems that everything works as planned so far, except that the title page and table of content ...
0
votes
0answers
31 views

difficulties with title_Canadian Journal of Physics

I have difficulties with the Canadian Journal of Phys. I have not found the template for the journal in the official site. So, I used the one at typeset.io. All the pages of my paper compiled well ...
1
vote
1answer
27 views

How to add and customize an element on title page of a beamer template

I'd like to add an extra element to the title page of a beamer template. I've tried re-purposing and re-positioning the \institute{} element for this, but moving it down causes the height of the page ...
2
votes
2answers
56 views

How do I use small capitals in the title of a document of class article?

I want to use small capitals in the title of my LaTeX document (of class article), which is all capitals by default. The following MWE does not give the expected results (it does nothing): \...
2
votes
1answer
59 views

Title page of University of Bonn

I have some problem with my title page. I would like to use the title page of the university of bonn (https://www.mathematics.uni-bonn.de/studium/bachelor/pruefungen/bachelorarbeit). But it isn't ...
0
votes
0answers
18 views

LaTeX: Why are bibliography titles formatted differently for @book and @misc?

I noticed that in my document titles of @books are formated in italics (\em), while titles of @misc are not. Why? Document sketch: \documentclass[a4paper,twoside]{report} \usepackage{german} \...
1
vote
0answers
39 views

How to set the title of the generated Postscript® file from within the source LaTeX file?

Every once in a while I have to compile source .tex files into .ps files. (The reasons may differ: e.g., due to certain amount of pstricks-heavy legacy code, or issues of some old-printer–CUPS-filters ...
1
vote
1answer
37 views

is there any way to define title page & abstract in tabular column & rest of contents in two column

i need to bring title & other contents as if in the image in two column document \begin{table} \begin{tabularx}{\textwidth}{l>{\raggedright}X} \toprule \fbox{\includegraphics[height=1.86in]{...
0
votes
1answer
25 views

table of contents in second page, title in the first

I am trying to write title in first page, and after table of contents: \documentclass{article} \begin{document} \title{My Title} \author{My Name} \newpage \tableofcontents \...
2
votes
1answer
43 views

Suppressing the frametitle after a specific command within a frame (e.g. titlepage)

I'm writing on a .sty - file for a theme, which others will use too. My aim is to have as less as possible additional (visible) code in the document environment of a corresponding .tex-file using the ...
2
votes
2answers
45 views

How to break a line here

I want to break the single line info above place into three lines: My code looks like this: \documentclass{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage[english]{babel} \...
0
votes
2answers
23 views

How to get horizontal rules around title and left-aligned author details?

I want to format the title and author section of my report like the authors have done in the image below. I have tried putting two horizontal rules above and below the title, but, if I do this, the ...
4
votes
1answer
138 views

Title page not generated

I'm just starting to learn. Faced with such a problem: on the collected PDF file no name and title. \documentclass{article} \usepackage{amsfonts} \title{Example} \author{Samvel Safaryan} \begin{...
0
votes
1answer
47 views

How to make the title look like this

I tried something like this. But it is not working. I want to put the author object on the left side, the date object on the right side and below them, the title should come and a line should come ...