Questions tagged [titling]
{titling} is a package providing control over the \maketitle command. For general questions about titles and title pages, use {titles}. For questions about lower-level titles like \section and \chapter, use {sectioning} instead.
90
questions
0
votes
0
answers
23
views
No \author given for titling package with amsart
\documentclass{amsart}
\usepackage{titling}
\title{Title}
\author{Author}
\begin{document}
\maketitle
\end{document}
The code above gives the error message below:
You have used the \maketitle ...
- 101
2
votes
2
answers
142
views
1
vote
1
answer
139
views
Remove the title, author from article but keep header
I want the title and date part to go away from the article. How do I do it? if I remove the \maketitle from the code, then the header also goes away but I want the header to stay. The doc content ...
- 49
0
votes
1
answer
23
views
How to generate different title in other page other than the title in the title page with no author and no date?
I am using overleaf.
This is my code in main.tex file-
\documentclass{article}
\usepackage[margin=1in]{geometry}
\usepackage{amsmath,amssymb,graphicx,hyperref,ulem,physics,enumitem,mathtools,titling}
\...
- 25
1
vote
1
answer
58
views
Is there something like \emptyauthor and \emptyaffil similar to \emptythanks in TeX?
I try to implement 2 titles in TeX document using package titling.
Something similar was considered in How to reset the author list?, but this solution works only for 1 author and 1 affiliation for ...
1
vote
2
answers
230
views
titlehead disappears with titling-package
I would need a titlehead on my title page (see related question here) and, format the title page with the titling packages. Unfortunately the titlehead disappears when the titling package is loaded.
...
- 173
0
votes
1
answer
114
views
Space size before a title in the Article class
What is the space size before a title in the Article class?
I want to use \droptitle from titling to place the title immediately after the top margin and I need the value to drop. By immediately I ...
- 135
1
vote
2
answers
155
views
Unwanted Extra Pages for Koma Script Title Pages with Graphics
Komascript. Book class.
I'm trying to use a graphic on (as) my title page but it throws two extra empty pages that I can't get rid of. The order should be:
1-half title page
2-title page
3-lower title ...
- 1,715
0
votes
3
answers
77
views
Using titlepages with memoir
I was wondering how to use the titlepage package together with the memoir package. I'm wondering what I'm doing wrong.
The code is from \titleHGP on pages 48-49 of the titlepages.pdf
I'm looking for ...
- 5
0
votes
1
answer
167
views
acmart with two \maketitle
I'd like to create a paper and its supplement in one document (for easy referencing). Below is an example. The problem is that the teaser figure and the abstract are saved before the \maketitle, and ...
- 1,237
0
votes
1
answer
138
views
How to make the title of the book bolder than \bf?
My code:
\documentclass[a4paper,12pt]{book}
% Title
\usepackage{titling}
\author{}
\pretitle{\begin{center} \huge\bf} \title{\uppercase\expandafter{\romannumeral3\relax} MY\\BOOK} \posttitle{\end{...
- 11
1
vote
1
answer
222
views
Unable to left align title and author name using titling package in an existing template
I am using an existing template that uses "titling". By default, the title is center aligned. I wanted to left align the title so that I may write my name in the same line. I know that there ...
- 113
3
votes
1
answer
111
views
Is it possible to use titling package with letter class?
An attempt to use the package titling with the class letter:
\documentclass{letter}
\usepackage{titling}
\title{Title}
\author{Author}
\date{\today}
\begin{document}
\thetitle\par
\theauthor\par
\...
- 998
0
votes
2
answers
383
views
How to apply title line breaks on the title page, but not in the page headlines?
I would like to have a macro which pass the book title both to the title page and to the page headlines. Unfortunately if I pass the title containing new line command (to break line on title page) ...
- 988
0
votes
1
answer
2k
views
Springer insert the author name and details below the title
I am using the Springer Latex template and when I submit the template to the journal in springer.
they asked me to insert the author name and details below the title
Springer template add the author ...
- 103
0
votes
1
answer
425
views
Cover page formatting
Could anyone help me out with making a cover page as shown in the picture? I am stuck with making the parts after the date. Thank you!
\title{ \normalsize \textsc{}
\LARGE \textbf{{Electronics ...
0
votes
1
answer
120
views
How to rename appendices according to the chapter number
I'm writing a book that includes some chapters. In some chapters, it's needed to prepare one or more appendices. Preparing a code for this style is simple as follows
\documentclass{book}
\usepackage{...
- 737
2
votes
1
answer
100
views
Presetting xkeyval keys to \thetitle or \theauthor
I'm writing a LaTeX template and am almost done (!!!) but I'm having a very hard time understanding xkeyval's \presetkeys behaviour.
I've managed to set some defaults, but when it comes to setting ...
- 47
2
votes
1
answer
390
views
Author before title in the title page of article class
\maketitle in the article class prints the title above the author but I want to reverse that and print the author above the title. Any suggestions?
\title{Can you find the solution?}
\author{you}
\...
- 143
2
votes
1
answer
98
views
How can I put section title numbers in a box
How can I put section title number in a box and I want the numbers to be shifted like this picture :
This is my code.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{xcolor}
\...
- 421
0
votes
0
answers
116
views
Titling package gives "Undefined control sequence" error when using a macro that defines a dimen in the title
I have a macro that defines a new dimension (details have been stripped away for the MWE; in the actual command, I want to store an old value in the new one so I can modify it temporarily and then ...
- 811
1
vote
0
answers
526
views
Error in default commands for pretitle/posttitle
I entered the default commands for pretitle and posttitle as defined by the documentation for titling to be:
\pretitle{\begin{center}\LARGE}
\posttitle{\par\end{center}\vskip 0.5em}
\preauthor{\begin{...
user209429
0
votes
2
answers
56
views
Section padding messes up line spacing in \maketitle
I was trying to reduce the vertical line spacing in the title of a LaTeX article by using the titling package and the \vspace command. A MWE is shown below:
\documentclass[12pt, oneside, letterpaper]{...
2
votes
2
answers
95
views
Fancyhead disappear during the application of title
I'm developing a business procedure template, and I noticed that by applying the title (with all its features) to the page, the fancyhead disappears on the page where the title has been applied. ...
- 155
1
vote
1
answer
1k
views
Put different title on the top of pages
I am writing a paper. Since, my title is too long, i need to write short title for top pages. For instance, this paper has a long title, but title of top pages are different. Does one help me ?
I ...
- 111
6
votes
1
answer
994
views
titling package in beamer class gives error: "! Undefined control sequence. \if@titlepage"
Using the titling package for a beamer class document results in an error even for the simplest possible setup (see example below). I did not find any documentation that would rule out using titling ...
- 61
0
votes
2
answers
3k
views
Start page numbering from first page
I have found that in books, there are a bunch of pages before the start of the actual content, such as a half-title, a copyright page, the table of contents, perhaps a dedication, etc.
I tried to ...
- 605
2
votes
1
answer
80
views
Does the oolatex part of tex4ht support the titling package?
I've been using the oolatex part of tex4ht in order to convert a LaTeX documet to an Open Office document (with the goal of eventually converting this to Microsoft Word), running it through the mk4ht ...
2
votes
1
answer
139
views
How to make a by-language title both in boldface?
As shown in the figure below, I try to make the title all covered in bold face, but after trying to use \textbf with the specific character I want, I still get a medium series in English. Is there any ...
- 21
0
votes
1
answer
290
views
Chapter Title and its name on middle of page
I use following code for sectioning of my title page of thesis. First two chapters title and chapter number is in mid of seperate page and text is started from next page,but next chapters start from ...
- 1
3
votes
1
answer
2k
views
Placing an image by the side of the title in LaTeX
I'm trying to place an image besides the maketitle command without messing it up, but after a lot of trial and error, I have something that just partially resembles what I'm going for and the source ...
- 97
1
vote
1
answer
1k
views
Flushleft package causes error
I managed to flushleft the article's title, author's name and the abstract, and to have an indent with the abstract and keywords. Although the code is executed on overleaf v2, once I compile the ...
- 491
0
votes
1
answer
460
views
Anchor title at top of document
I have the following code:
\documentclass[11pt, showframe]{article}
\usepackage[margin=2.5cm]{geometry}
\usepackage[utf8]{inputenc}
\usepackage{lipsum}
%\usepackage{titling}
%\setlength{\droptitle}{-...
- 501
1
vote
1
answer
699
views
Horizontal alignment of pretitle
I'm writing a project relation and have pretty much achieved what I wanted. There is something that is bugging me and hav been trying to fix it but no luck. On the first page there are details of the ...
0
votes
1
answer
2k
views
Place author name between title and affiliation
I have the following code:
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[margin=2.5cm]{geometry}
\usepackage{lipsum}
\begin{document}
\title{
{...
- 501
1
vote
1
answer
397
views
Date next to the author
I created my own title format using titling. I would prefer that the date is in the same line than the author, seperated with a comma. Is that possible?
\documentclass[a4paper,10pt]{article}
\...
user115202
2
votes
1
answer
864
views
How come I can redefine \maketitlehooka but not pass the same as an argument to \pretitle in the titling package?
I am attempting to change the font and size of the title through means of the titling package.
In the documentation, it is described that the \maketitle now looks something like this:
\renewcommand{\...
2
votes
0
answers
275
views
Create a subtitle with titling for use with fancyhdr
I'm new to LaTeX and am trying to create a subtitle for a document. I'm using the titling package because it propagates values like the document title, author name, etc. even after maketitle is called....
- 21
3
votes
1
answer
889
views
Logo at right of title on first page
I want to place a logo to the right of the title information on the first page of a document, like this:
My current code looks like this:
\usepackage{titling}
\pretitle{\begin{center}\LARGE\...
- 31
0
votes
0
answers
644
views
How to create two different title pages with the \maketitle command? [duplicate]
I would like to create two different title pages (one with the author information and the thanks notes and one without) by using the \maketitle command. Repeating the commands one after another wasn't ...
- 21
1
vote
1
answer
800
views
How to reset the author list?
I am using titling package and authblk to manage multiple articles in a single file. Below is the code for example
\documentclass[11pt,openany]{article}
\usepackage{amsmath,amsfonts,amsthm,dsfont,...
- 1,934
1
vote
1
answer
5k
views
How to put text after the author in title
I have one question regarding how to put text after the author in my document. This is my code :
\documentclass[12pt, fleqn]{report}
\usepackage[utf8]{inputenc}
\usepackage[english,greek]{babel}
\...
- 91
5
votes
1
answer
5k
views
How to decrease the gap between the title and the date in article?
I have the following .tex code:
\documentclass[11pt]{article}
\usepackage{titling}
\begin{document}
\title{Letter}
\setlength{\droptitle}{-10em}
%\author{}
\maketitle
\end{document}
As you can ...
- 1,316
5
votes
1
answer
2k
views
Can't get unicode to work in \title (inputenc: Unicode char not set up for use with LaTeX)
I want to use bottom bracket ⎵ in a title:
\documentclass[11pt,a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{titling}
\usepackage[lf]{venturis}
\usepackage[T1]{fontenc}
\title{Foo⎵Bar} ...
- 4,374
3
votes
1
answer
951
views
Titling package and date formatting
I am using the titling package the resuse the defined date etc. using a plain \thedate command. However the date format is not what I need because of different type of localization.
My first shot was ...
- 155
0
votes
2
answers
595
views
Avoid \thanks text repetition and symbols in article when using multiple titlepages
I am trying to combine three papers written in the article class into one document. Therefore, it is necessary to define three titlepages that contain the authors, the date and the abstract of the ...
2
votes
1
answer
1k
views
Overlapping footnotes on title page
When I try to use footmisc and titling packages in a document, there are a problem with author footnote marks. Footnote marks overlap in a single point. Here my MWE.
\documentclass{article}
\...
- 21
2
votes
1
answer
2k
views
How to fix text alignment?
Update2:
Never mind, i made the mistake of including a extra \begin{center}. removing it fixed the problem.
Update on Thorbjørns solution
I did not manage to get it working.
When i include the ...
- 123
0
votes
2
answers
4k
views
IEEEtran appendix in new page with new title as if it was a new document
How to make \appendix or the \sections after \appendices appear in new pages and with the title style as the main title in an IEEEtran document class?
The following images show an example of what it ...
- 1,013
4
votes
1
answer
668
views
Why \protect doesn't work with \linebreak?
This question is merely educational and it does not intent to find a solution to a problem, please don't provide an answer like "just use \\ instead of \linebreak".
In the following code, the ...
- 1,013