Questions tagged [tocbasic]
{tocbasic} is a package that allows to create or customize lists of something like the list of figures, list of tables or table of contents and to define new {floats} or non-floating environment similar to floats. It also helps avoiding name conflicts for the auxiliary files of such lists. KOMA-Script classes depend on it, but it can be used with other classes too.
36
questions
0
votes
0
answers
7
views
Expanding Multiple Lists beyond four lists with tocbasic
I am using package tocbasic under report, and have successfully expanded the lists to include two new ones, however, I need a third new list. I have entered \DeclareNewTOC successfully and get the new ...
- 1
1
vote
1
answer
28
views
Alignt ToC around space between chapter titles and page numbers
Is there a way to center the ToC around the space between the chapter titles and the page number as in this pictures (not aligned to the right of the page, but the whole thing relatively centered, or ...
- 37
1
vote
1
answer
67
views
Access to the current section number inside `DeclareTOCStyleEntry`
I'm using KOMA-Script and I want to show additional information inside the TOC.
Imagine the following code:
\section{S}
\immediate\write\@auxout{\global\noexpand\@namedef{@info-\arabic{section}}{Cool ...
- 159
1
vote
1
answer
134
views
List of Listings (lstlistings) style in KOMA-Script
This post suggests that scrhack is required to format a list if listings consistently: How to have the list of code listings also in twocolumn? I would like to format my List of Listings consistently ...
- 1,434
0
votes
1
answer
44
views
How to insert extra space between chapters in the LoF/LoT in the komabook class without calling \chapter{...}?
I am using the kaobook template for my PhD thesis. It can be found here on Overleaf.
Due to design reasons, I do not call \chapter{...}, but simply increment the chapter counter manually. Because I ...
- 399
2
votes
2
answers
384
views
move from tocstyle to tocbasic
I have been using tocstyle until it was removed.
Here is my definition
\usepackage[%
%%% toc width calculation
tocindentauto, % all widths at the TOCs are calculated by tocindentauto
%%% ...
- 11.6k
0
votes
1
answer
119
views
Format Prefix of Custom Float Environment entry in Custom List of Figures
I am working on a document with complex formatting based on report class.
I defined a new List of Figures for Photographs using \DeclareFloatingEnvironment from newfloat package based on this answer. ...
- 123
3
votes
0
answers
172
views
What is the equivalent of \usetocstyle in tocbasic
Miktex considers the tocstyle package to be obsolete and suggests using tocbasic instead. However, with tocbasic I get undefined control sequence at \usetocstyle. I found that \DeclareTOCStyleEntries ...
- 31
1
vote
1
answer
181
views
retaining \listoffigures and \listoftables in \tableofcontents when they are controlled by tocbasic
How can the List of Figures and List of Tables be included in the Table of Contents when they have been placed under the control of the tocbasic package? Ordinarily, these listings can be included by ...
- 7,884
1
vote
1
answer
65
views
replicating the vertical spacing of \listoffigures in a custom list made with tocbasic
I have used tocbasic to create a custom environment. The appearance of this environment's listing, however, differs from the default listings (i.e., \listoffigures and \listoftables).
Differences in ...
- 7,884
1
vote
1
answer
224
views
adding custom list to table of contents
How can a list for a custom environment, created using KOMA script's \DeclareNewTOC, be included in the table of contents? In the example below, the 'List of Photos' does not appear in the table of ...
- 7,884
0
votes
0
answers
90
views
Latest release of koma-script: compilation hangs at tocbasic
I had been using a modified version of this template https://www.overleaf.com/latex/templates/my-resume/qxsxdtmknkfr for my resume without problems (class file at https://github.com/...
- 21
1
vote
1
answer
145
views
Modify LOF- and LOT-Style in KOMA-Script scrreprt
I have modified my TOC with \DeclareTOCStyleEntry[beforeskip=.2cm]{section}{section} giving me a nice spacing between my section level entries.
How can I modify the spacing between entries in the LOF ...
- 121
1
vote
1
answer
269
views
Table of Contents without Boldface Using KOMA Script tocbasic
I would like to have the complete TOC without setting the top level in boldface. In the past I used tocloft but KOMA throws a warning and suggests to use tocbasic. Unfortunately, I didn't understand ...
- 2,718
0
votes
1
answer
182
views
Modify format of chapter number in toc independent of chapter number in heading
I want to format the toc-chapter numbers indpendent of the chapter numbers in the text. The chapter number for the appendix should be in small caps. However, I've modified the \chapterformat in a \...
- 540
2
votes
2
answers
341
views
KOMA toc equal numsep with exact indentation
I'm trying to format the toc, but I stuggle with the horizontal spacing and indentation.
The chapter and part headings should have a minimum numsep of 1em for the longest number while also being ...
- 540
1
vote
1
answer
104
views
KOMA toc: constant distance between section title and pagenumber
For my toc, lof and lot I would like the page numbers to have a constant distance to the chapter, section, etc. titles, wether they have one or two digits. The option linefill from the KOMA command \...
- 540
0
votes
1
answer
421
views
Spacing between list of listings and algorithms and their reference numbers with tocbasic
Because of this answer to Extending table of contents dots up to large page numbers I am using tocbasic and would like to add more spacing between the reference numbers in the
List of listings
...
- 2,657
1
vote
1
answer
192
views
Table of content entry pushes large page number into margin
I have just been playing around with this solution to a question I asked Extending table of contents dots up to large page numbers. I noticed the following behaviour.
For some very long Roman page ...
- 2,657
5
votes
1
answer
932
views
Replacement minitoc package style by KOMA-script possibilities
I have a long document which uses the KOMA-Script book class scrbook and I would like to add a part-level and chapter-level table of contents, as it is shown on figures below:
It works, but KOMA ...
- 3,860
3
votes
1
answer
222
views
Changing the place of contents in toc with scrreprt
I need to change “contents” word to the right. How can I do it?
\documentclass[listof=numbered]{scrreprt}
\begin{document}
\tableofcontents
\chapter{Chapter 1}
\cleardoublepage
\pagenumbering{Roman}
...
- 946
1
vote
1
answer
352
views
Add vertical and horizontal spacing between entries of LOF
Does anyone know how I can add vertical and horizontal spacing between the entries of my LOF?
\documentclass[12pt,a4paper,twoside]{report} %openright
%Schriftart Arial - ACHTUNG: Compile with ...
- 585
1
vote
2
answers
974
views
List of Figures & Tables - how to move caption label into caption itself
I'm using the article document class (as a base) and the caption package. I essentially need to change my LoF format from the default
List of Figures
1 Multiline caption multiline caption multiline ...
- 335
1
vote
2
answers
1k
views
How to let \listoflistings of minted use subsection's subheading and appear in TOC?
I want the \listoflistings of minted to appear as a subsection heading. (My \documentclass is scrartcl.)
Things like \printbibliography have a "heading" option, which you can use to define, which ...
- 1,070
1
vote
1
answer
579
views
Customizing Sections in Table of Contents
community,
I have received great help many times before on this platform and I really do hope that you can help me yet again! I'm trying to customize my ToC in such a way that things like the List of ...
- 379
1
vote
1
answer
236
views
How to multicol a chapter (and its sections etc.) in table of contents?
Since the second chapter only contains short sections etc. I would like to have only chapter two multicolumned.
With BeforeStartingTOC[toc]{\begin{multicols}{2}} \AfterStartingTOC[toc]{\end{...
- 2,803
2
votes
1
answer
736
views
How to indent TOC-entries (as indexes) which have no numbers with tocbasic?
Similar to this question here, how can I indent the chapter*-like entries to the same indent as the numbered chapters?
section* work with \KOMAoptions{toc=indentunnumbered}.
The main difference to ...
- 2,803
2
votes
1
answer
667
views
Remove page number for part and define space before page number with tocbasic
I would like to omit the page number of parts from the TOC.
The space between --- (\mypagestyle) and the page number differs, since they are raggedright. The space should always be the same.
`
\...
- 2,803
3
votes
2
answers
248
views
Remove section titles from list of custom environment if section doesn't contain said environment
This is a follow-up question to this one.
In the following MWE, how can I remove section and subsection titles from the \listofusecases if said section or subsection doesn't contain a single usecase ...
- 4,002
9
votes
1
answer
3k
views
Creating new entry style in tocbasic
I want to customize my table of contents and lists of figures and tables using tocbasic. I originally did these customizations with tocloft. I managed to get almost everything done. However there are ...
- 57.8k
3
votes
1
answer
276
views
KOMA-Script: Pagenumber immediately after heading in table of contents
I want to use scrbook and the internal commands of KOMA-Script to typeset the table of contents and others (LoF, LoT) in a similar style as this screenshot shows:
I couldn't find any hints about it ...
- 3,414
3
votes
1
answer
414
views
Chapter names in TOC spanning textwidth
I want to set \@tocrmarg to 0pt in the case of chapter to have it spanning across the whole TOC. I am using the tocbasic package (successor of tocstyle), both are parts of KOMA-Script.
MWE:
\...
- 3,132
5
votes
2
answers
364
views
Is there a Hook like \AtEndDocument for the table of contents?
I have written a document class, and I need to change the page numbering.
The table of contents should use roman style page numbering, the rest should use arabic.
It would be great if it was possible ...
- 113
9
votes
1
answer
2k
views
KOMA-Script: Table of Contents in Two Columns
I have a document in two column mode. All works fine (all in two columns) -- except the table of contents (toc). Strangely I found a solution:
\unsettoc{toc}{onecolumn}
This leads to a toc in two ...
- 22.2k
4
votes
1
answer
582
views
Adding "diagrams" to figures and tables / duplicate float?
I am writing a paper using KOMA script (scrartcl) and have a lot of tables, figures and diagrams: the latter really are nothing but figures but need to be counted separately and get their own list of ...
- 6,650
6
votes
1
answer
2k
views
Formatting "List of something" in accordance to KOMA script
I am using scrbook document class. I've created my own environment named example and I wanted to create "List of examples." In that name I've loaded package tocloft.
However as much as I try, the "...
- 6,167