# Questions tagged [transformation]

The tag has no usage guidance.

42 questions
Filter by
Sorted by
Tagged with
151 views

### Converting letters to numbers (e.g., A=0, B=1, et cetera)

I recently asked the opposite question, and got some really awesome answers, but just realized I'm uncertain of a counterpart for converting letters to numbers. Here's the code I'm using to convert ...
16 views

### Software Requirement Specification Style sheet

There is another Q. on SE with the same title, but my expectations are different. Re opening the question to check if there is something meeting my requirements out there. If we look at a requirement ...
51 views

### How do I write this style of functions? [duplicate]

How do you thing I could write this type of function in Latex? I don't know how to make functions like in the picture. Thank you!
30 views

### How can one use named coordinates and still do the coordinate transformations (shift, rotate etc.)?

Consider this MWE: \documentclass[tikz]{standalone} \usepackage{mwe} \begin{document} \begin{tikzpicture} \draw [help lines, step=1cm] (0,0) grid (4,2); \coordinate[label={$X$}] (X) at (0,0); ...
102 views

### Using tikz to transform a single letter

I want to transform one letter on a title page in a very specific way. To illustrate the effect I'm trying to accomplish, I've attached an image. Notice how the left half of the letter H is shorter ...
82 views

### How to plot the DFT transformation of a vector with tikz/pgfplots?

My question seems to be simple but still I could not find any answer for that. Assume that we have a vector and its DFT which I computed it in R. > x <- c(3,9,4,2,5,6,2,6) > x  3 9 4 2 5 6 ...
68 views

### How to reverse time on paths

I am trying to draw a circle and its projection a plane. I can draw a circles on one plane an its projection on the other plane. Now i want to draw all possible perpendiculars from every circle's ...
33 views

### luatex node library: restore pdf transformation matrix to original state after adding pdf_setmatrix node

How can I restore back to the original pdf transformation matrix after changing it using pdf_setmatrix whatsit node? The restore node should work with vlist/hlist/word/glyph. Below is the complete ...
104 views

### Define a projective transformation in metapost

The Metapost contains the affine transformation of 2D-plane, in the homogeneous coordinates, i.e., under the identification of $(x,y)$ in 2D-plane with $(x,y,1)$, the representation matrix is given by ...
147 views

### TiKZ: How to apply a pgftransformnonlinear to imported image using includegraphics

I've written a non linear transform and am able to transform figures drawn in TiKZ correctly (transformed the rectangle on the left to the arc on the right) but doing the same on \includegraphics ...
324 views

### Symbol for Laplace Transform : 2 connected dots, one filled [duplicate]

What I want is the following: x(t) ●-o \hat{x}(f) (The bar should be longer) What is the name of the symbol in between and does it exist in LaTeX?
3k views

### Draw a symmetric alien head

I am trying to draw the following "symmetrical alien head": Using the mirror code from Can we mirror a part in tikz? I was able to produce the following result While the result looks good I am not ...
373 views

### Deformation of rectangular plot

Can I deform a rectangular plot to a curved plot like \documentclass[tikz, border=0.5cm]{standalone} \begin{document} \begin{tikzpicture} \draw[red] (0,0) grid (5,5); \draw[->, black] (0,...
661 views

### Making Linear Transformations Using Tikz

I am trying to create a visual for a linear transformation done by matrices. Here is an example of what I am shooting for: I would like to have the original gridlines in place, but like faded out a ...
50 views

### List of all available parameters of \boxgs{arg1}{arg2} of “pdf-trans” package

An interesting box transformation I have found on the following page: https://tex.stackexchange.com/a/169549/26458 is pdf-trans package. It seems there is no manual available. Only example is provided....
268 views

### I want to print the matrix on the arrow from A to B. How can I write?

I am working on quiver representation. I want to print the matrix on the arrow from A to B. How can I write? For example: For linear transformation $k^{3} \arrow{r} k^{2}$
498 views

### Scale, rotate and transform ellipse in TikZ picture

I want to draw some ellipses and then transform the ellipse without changing its area. I want to be able to transform the ellipse according to the following two equations; First transformation: ∆y ...
236 views

### transform shape nonlinear=true vs. accessing coordinates

I am having problems with transform shape nonlinear=true option, which can be found on page 123 of the pgfmanual. (Notice that this question was originally part of this earlier question. However, @cfr ...
176 views

### TikZ: How to correctly scale a node drawn by “circle through”?

Here's an MWE showing the challenge when I tried to use circle through with a scaling transformation (and transform shape): \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{through} \...
336 views

### Nonlinear transformation of tikzpicture according to a function

How does one can transform tikzpicture according some shape, which is given by an equation? \documentclass[tikz]{standalone} \usepgfmodule{nonlineartransformations} \makeatletter \def\...
112 views

### Reflection of functions on function [closed]

is there an efficient way of plotting somehting like this: thank you in advance, cheerz
232 views

### Apply polar transformation to a shaded rectangle

Update How can I get the shade to vary in the theta direction of the transformed figure rather than left to right? I was hoping the left to right shading in the original rectangle would become a ...
824 views

### A matrix with breaking line and matrix transformations

folks! Sorry if this question has already been asked and answered, but I googled so hard I just can't find the right answer. I learned how to write a matrix with a breaking line, using the array: \...
70 views

### Manipulating a polygon after few operations?

I've two polygons. The polygon have undergone some transformation like rotation and shifting. Suppose after the transformation, say as an example, how do I draw a perpendicular bisector from one of ...
173 views

### In what sense does PGF not keep track of canvas transformations?

In section 103.3 'Canvas Transformations' the TikZ & PGF manual for version 3.0.1a points out a distinction between coordinate transformations and canvas transformations (p. 1051): Unlike ...
399 views

### Geometric inversion of an image (png, jpg, bmp)

Is it possible to invert an image (the format is png, jpg, bmp) with respect to the given reference circle in LaTeX? Can we transform the individual pixels (e.g. with complex transformations such as ...
233 views

### replace betababel-code with greek letters

For years I used the betababel package to type greek text. Now I switched to Lualatex and the package does not seem to work with it, which makes sense because you can type in the greek text directly. ...
285 views

### Why does scaling a tikz picture cause everything within the scope of transform canvas to disappear?

I drew a tikz picture, but after scaling the picture using \begin{tikzpicture}[scale=200/(\hsize-24)], everything inside the scope of transform canvas disappear. could someone explain this? This the ...
208 views

### Can tikz-3dplot's transformation be accumulated?

It is well-known that transformations in TikZ can be accumulated. For example \documentclass{article} \usepackage{tikz,tikz-3dplot} \usetikzlibrary{} \begin{document} \tikz{ \path ...
1k views

### Adapt harvard-thesis template to B5 format

I have no really idea how to adapt the harvard-thesis template to B5 format. I found this post related with, but I don't know how to adapt it to my template: Thesis template to B5 paper size. What ...
42 views

### Scale every page preserving links

I have a document that I want to use for print and ebook (pdf). I don't what to check line-breaks and pagination twice, so I was planning to use two slightly different configuration of the geometry ...
164 views

### Showing different coordinate systems by uncovering in tikz?

Using beamer I want to show how different linear transformations act on the plane. I tried to do this by uncovering different \pgftransformcm commands, but it doesn't work. What would be the best way ...
41 views

### tikz problem using \draw … to[out in] and mirroring/rotating [duplicate]

I have a graph in tikz, using \draw ... to[out=...,in=...] for arcs. It seems that mirroring and rotating does not work properly regarding the anchors of the to-node. Is this to be expected, or is it ...
3k views

### “Star wars” text effect

I would like to apply a transformation to some text so that it is slanted following a trapezoidal shape, such as the famous opening text of the Star Wars franchise: This seems tricky to do since it ...
2k views

### Linear transformation Coordinates

I want to transform the canonical coordinates system , i.e. whose basis vectors are (1,0) and (0,1): \documentclass[a4paper, 12pt]{report} \usepackage{fullpage}[1cm] \usepackage{tikz} \usepackage{...
368 views

### Script to remove curly brackets around a single token. How legitimate would that be?

I work on a script that tries to bring LaTeX input into a more canonical form. One of the things I would like to do is remove curly brackets around single tokens, which could be either a single ...
180 views

### Relative coordinates after cycle with transform

When I was trying to understand this question I discovered a strange behavior when we use relative coordinates just after cycle in a transformed path. Here is an example (the black path) : \...
3k views

### Representing general transformations on a 3D grid using TikZ

I have a cuboid made from unit squares which in 2D looks like the following: Considering a 3D version of this (i.e. a cuboid). I wanted to use Tikz to demonstrate some of the possible deformations ...
3k views

### Draw the Ubuntu Logo with Tikz

Starting with Tikz, I'm trying to draw the Ubuntu Logo. However, I'm stuck at the begining, since I don't know how to draw the three gaps on the logo. My idea is to draw 3 rectangles and fill them in ...
1k views

### Fast way to underline words and characters

I’m making a summary of definitions for Linear Algebra. I need to underline all vectors. This takes me a lot of time because \underline{u} is a long command to type. Is there a way to set an alias for ...