Questions tagged [trees]

{trees} is for questions about drawing or constructing tree {diagrams} (for example, family trees).

Filter by
Sorted by
Tagged with
4
votes
0answers
536 views

How to convert Newick tree format to TikZ? [closed]

I need to draw a number of large phylogenetic tree diagrams in a document and it appears that tikz-qtree may be the best package for this task. A manual approach does not seem the best solution to ...
12
votes
1answer
3k views

Tikz tree and position of single leaf in binary tree

I am constructing a binary tree which looks as follows: \begin{tikzpicture} \node {root} child { node {left} } child { node {right} child { node {rightmost} } ...
10
votes
1answer
233 views

Indefinite Subtrees

While doing tree proofs, sometimes we need to consider a root with some subtrees, but we don't know the exact properties of the subtrees, so we just represent them using triangles. Is it possible to ...
1
vote
0answers
376 views

Using tree-dvips with pdflatex? [closed]

It seems like using tree-dvips with pdflatex is not very easy. It has been documented in various places in the web. I wouldn't mind using latex and then convert to PDF, but I am actually interested ...
0
votes
0answers
68 views

Strange line width problem with tikz-qtree [duplicate]

Possible Duplicate: TikZ borders showing through when they shouldn’t (overlapping circles) I have a strange problem with using tikz-qtree where the thickness of the lines are a bit odd. When I ...
5
votes
2answers
2k views

complex nodes with tikz-qtree

I am trying to convert my tree-dvips trees into something that is compatible with xelatex. I had a look at the tikz-qtree package, but it seems to be impossible to set complex nodes. In the old qtree ...
3
votes
2answers
1k views

Using tree-dvips with XeLaTeX

I try to switch to XeLaTeX, but the package tree-dvips causes problems. It seems to require PostScript and pdftricks which causes a lot of other problems (puts a \begin{center} environment around ...
3
votes
1answer
1k views

A simple tree for a website structure?

I would create a simple picture of a small websitestructure and i found these nice example http://www.texample.net/tikz/examples/family-tree/. But I would change some things and I don't know if it is ...
11
votes
2answers
13k views

I'm getting the error: ! Paragraph ended before \@@label was complete

I've scoured this forum and it looks to me like I'm setting up the tree correctly, but I'm still getting this error, I have \usepackage{tikz} \usepackage{tikz-qtree} in the header. Here is the ...
3
votes
2answers
3k views

place several figure into one -tikz

I draw several trees and now I want to place them in a figure ( side by side or one below the other ) \documentclass{report} \usepackage{tikz} \usetikzlibrary{fit,shapes} \begin{document} %...
7
votes
1answer
1k views

Incomplete arrows and missing arrow heads in TikZ

I have the following plot which looks good, but there are two issues: Not all arrows have arrow-heads. I have no idea why this is. Some edges are not long enough. For example, the left edge of the ...
6
votes
1answer
753 views

How do I draw curve crossing one edge of a tree (using tikz-qtree)?

I am using tikz-qtree, and I'd like to draw a curve separating a set of nodes from the rest of the tree. For example, \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{...
1
vote
2answers
902 views

Draw a tree with variable node number

I would like to draw a tree in tex that is more like a sketch of a tree: It should contain variable node numbers. Important is, that the dots are contained in the tree drawn. Is that possible with an ...
9
votes
4answers
535 views

Problem using macros to define tree substructures

Relatively simple problem: I want to use macros to define substructures of a tree. In the following example for illustration, I want to define some children (left and right) to be used several times ...
3
votes
0answers
169 views

Draw Tree using tikz [duplicate]

Possible Duplicate: Drawing a tree where many nodes have the same child in TikZ I'm trying the draw a tree using the tikz package, \begin{center} \begin{tikzpicture} [...
5
votes
1answer
534 views

Tree using Latex

I want to to reduce the size of the node to which they perceived better in my presentation; the problem is that the nodes are overlap. I have the code from Drawing a tree where many nodes have the ...
11
votes
1answer
1k views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling distance=...
8
votes
1answer
3k views

How to draw a joining line between two picture tikz-pgf

I'am having draw two tree using the tikz-pgf package \begin{frame} \begin{columns}[c] \begin{column}{2cm} \begin{tikzpicture}[scale=0.5] \tikzstyle{level 1}=[sibling distance=10mm] ...
3
votes
2answers
333 views

Demonstrating syntax of a sentence [duplicate]

Possible Duplicate: How to draw syntactical trees with parallel leafs for a natural language? Consider page 4 in following paper: Pantcheva 2007 Which package can be used to draw a similar ...
8
votes
2answers
3k views

TikZ: Draw a B+ Tree

Having consulted How do I draw a B+ tree with tikz in latex with more than 4 Key value pair in a node and How do I draw a B+ tree in latex? threads, I think the multipart feature of TikZ might just do ...
5
votes
2answers
4k views

AVL Trees in TikZ: draw outside of node

I'm trying to draw an AVL tree with TikZ. I got the basic tree structure covered, but I'm not sure how to draw the balance factor outside of the node (see picture below). Any suggestions?
8
votes
4answers
4k views

TikZ - game tree representation with continuum of moves

I have been using TikZ to draw game-trees for my game-theory lectures (mostly using the automata package) but I could not figure out how to draw an arc across the edges the leave a given node. When we ...
6
votes
1answer
364 views

What is a suitable package for drawing term algebra style trees

I want to be able to draw something like nested triangles that are arranged in a tree-like fashion. Or explicitly, a node of a tree is represented as an isosceles triangle pointed upward. Each ...
1
vote
1answer
698 views

Aligning trees built with tikzpicture

I want to align some trees I am creating. I want the root node of all the trees to be on the same line. Currently for each tree I create, the root node of each subsequent tree is on a line after the ...
6
votes
2answers
7k views

Tools for tree diagram

I would like to make a simple scheme looking like tree diagram (structure like this or that). The problem is that all the packages I did try, could make nice binary trees with little information in ...
3
votes
1answer
734 views

Writing a line from two sibling nodes in a TikZ tree

Recently I am struggling on TikZ and it is really difficult to find options and solutions considering it is such a huge and comprehensive library. What I actually would like to do is drawing, in a ...
1
vote
1answer
2k views

Problems with tikz tree growth on secondary levels in trees

I have the following code: \begin{tikzpicture}[grow=right, sloped] \tikzstyle{level 1}=[level distance=1.3cm, sibling distance=1cm] \tikzstyle{level 2}=[level distance=1.2cm, sibling distance=1cm] \...
7
votes
2answers
9k views

How to draw a horizontal tree with branches on the right and left?

I need to draw trees but they should extend (from the root) on both sides. TikZ seems a good solution but do not how to manage it.
6
votes
2answers
3k views

TikZ-tree: edge-alignment in horizontal org-chart

I'm working on some sort of org-chart/hierarchy-tree and ran into issues with the edge-alignment. As a guideline I used the family-tree-TeXample. See the TeX.sx-dicussion here. However, the text in ...
5
votes
1answer
2k views

Alignment of node labels in tikz-qtree

I am trying to draw a refutation tree: \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \Tree [.\node[label= {$\langle \...
6
votes
1answer
2k views

How to specify left and right node of a tikz-qtree

I'm drawing a binary tree using tikz-qtree. In my binary tree the order of children is important, so I need distinguish which edge is the left one and the right one. In my sample code I can't ...
4
votes
2answers
581 views

How to generate labels next to junctions and avoid self-collision with tikz?

I have an ASCII-art phylogenetic tree that looks (in part) like /------ PLN /-----+ 0.9 | \------ IL1 /--------+ 1.8 | | /----- PVD | ...
5
votes
1answer
660 views

How to align a vertical tree to the upper-left corner?

How do I align vertical trees to to the top? This is my current tree:       I want to get this tree:                  ^ That's a part of ...
4
votes
1answer
521 views

Package for energy budget trees

Is there a package that can typeset trees used for energy budgets? The image is an extract from Dynamic Energy and Mass Budgets in Biological Systems by B.Kooijman which is easily identifiable as ...
4
votes
1answer
936 views

Visualizing broad Tikz tree graph

Modules of software I created produce Tikz QTree diagrams for visualisation. The problem is that some trees grow quite broad... Even when I try to massively shrink them by Tikz settings, I cannot fit ...
28
votes
3answers
6k views

How can I improve this family tree in TikZ?

To answer a question about how to draw family tree on LaTeX-Community.org, I created an example: \documentclass{minimal} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[ ...
2
votes
2answers
586 views

Describing leaves of a tree with an underbrace using pstree/pstricks

I'd like to have a discription for some of the leaves. It doesn't need to be an underbace, if somebody has better graphical suggestions... :) Consider this example: \pstree[levelsep=35pt]{\Tcircle{$\...
7
votes
1answer
7k views

LaTeX probability tree

Please could you tell me if the Probability tree posted on 2006-12-14 by Kjell Magne Fauske can be done with three branches instead of just two.
201
votes
17answers
36k views

How can we draw a Christmas tree with decorations, using TikZ?

I would like to use TikZ for drawing a christmas tree. Here's a start, I used the lindenmayersystems library for drawing a tree: \documentclass{article} \usepackage{tikz} \usetikzlibrary{...
22
votes
3answers
5k views

How to change the level distance in tikz-qtree for one level only?

I am trying to draw a tree for a game theory problem. The problem is that the label p1=0.5 crosses label I. I would like to adjust the level distance of the first level, but the \tikzset{level ...
4
votes
2answers
906 views

Tree in a graph's node

I am trying to figure out how I can draw a tree in a graph's node with tikz. Meaning, the node is not supposed to have a value or name but a tree inside of the circle around it. I tried the following ...
4
votes
1answer
834 views

How to balance binary branches and repair shorthand triangles in LFG style c-trees using tikz-qtree

I have modified the example from the tikz-qtree documentation to form this LFG style c-tree, but am having difficulty balancing the binary branches in general, and the IP branches and roof/triangle DP ...
4
votes
1answer
2k views

Arrows in tikz-qtree with symbols in node names

I have a syntax tree with angle brackets to represent movement: \begin{tikzpicture} \Tree [ .TP [ .T' \node{T+verb}; [ .vP \qroof{`ana}.DP [ .v' \node{v+{\textlangle}verb{\...
5
votes
3answers
2k views

Making mixed trees with and without text-containing nodes

I’m using TikZ to draw linguistic syntax trees where some nodes have textual labels and some nodes don’t. I’d like the branch from a labelless node to continue at the same angle into the right hand ...
9
votes
1answer
2k views

Tikz - Marking nodes in a binary tree?

I need help marking nodes in a binary tree. I've tried drawing this using the fitting library in tikz, but the fit would cover other undesired nodes as well. Please help. The code I tried is here \...
4
votes
1answer
2k views

adding a node to a qroof in tikz-qtree

I need a node in the head element of a qroof in tikz-qtree (using tikz-qtree-compat). I need the 'np' to be a node so I can draw an arrow to it. However, the following breaks: \documentclass[10pt]{...
1
vote
0answers
249 views

lingtrees on Miktex [closed]

I'm using MikTex 2.9 on Windows 7. I also have python 2.7 installed and added to my path. I'm trying to install and use lingtrees to draw syntax trees. Unfortunately it doesn't have a MikTex ...
10
votes
1answer
281 views

tikzpicture has a node whose text is a tree: unevenly formatting

I want to typeset a picture similar to the following one, using tikz. For that purpose I have written the following latex document \documentclass{minimal} \usepackage{tikz} \usetikzlibrary{chains} \...
2
votes
1answer
499 views

How does one use \node[inner node]{}?

I'm trying to reproduce a TikZ tree from a Till Tantau presentation (see pg.33 of this .pdf) My code is as follows: \documentclass{article} \usepackage[latin1]{inputenc} \usepackage{...
27
votes
5answers
13k views

Drawing a directory listing a la the tree command in TikZ

Good day everyone - Is there a fast and efficient way to draw directory tree structures (aka depth-indented listings) like the unix's tree command, that is, is there a way to draw the following using ...