The Stack Overflow podcast is back! Listen to an interview with our new CEO.

Questions tagged [two-column]

{two-column} is about the \twocolumn command and the class option of the same name. For questions about the {multicol} package, use the appropriate tag instead.

Filter by
Sorted by
Tagged with
0
votes
1answer
40 views

How can I fill white spaces in two column when I have minipage?

I am writing an article in two column and I am using the minipage environment. The problem is that in the column where there is the minipage any text fills the white space ? Why this happens ? I tried ...
0
votes
0answers
325 views

RevTex 4.2 Two-Column Journal Formatting for AIP

I am in the process of writing a paper for submission in AIP Physics of Fluids journal. I am using the RevTex 4.2 distribution to get their formatting, but I am unable to reproduce how the final ...
2
votes
1answer
55 views

Spacing above/below decorative line in fancy header in a two-column document

I'm trying to use a slightly adapted version of the "real 'decorative line'" example from the fancyhdr documentation (p. 17, bottom) in a two-column book document. However, straight from the pdf, the ...
2
votes
1answer
82 views

force the text to start in the second column of a two-column document

can someone help me to do the following? This is my code: \documentclass[twocolumn,spanish,10pt, letterpaper,openany]{scrbook} \usepackage{lipsum} \usepackage{multicol} \usepackage{polyglossia} \...
1
vote
1answer
295 views

How to fix vertical spacing issues in a CV template?

I am using this template for a CV. However, for some reason I am getting incomplete sections over the two pages, for example: How can I make section 4 appear in the other side of the page (top of the ...
0
votes
0answers
24 views

How to set a fixed distance between section and the text in a twocolumn document

I would like to know how to set a fixd distance bewteen the title of a section and corresponding text. \documentclass[twocolumn,prl,nobalancelastpage,aps,10pt]{revtex4-1} %\documentclass[rmp,...
4
votes
2answers
296 views

Too much space between section and text in a twocolumn document

I don't know why there is so much space between the section's title and the beginning of the text. I am using the same 'template' with class revtex4-1 for others documents and it works normally. \...
1
vote
1answer
55 views

How to force to start to write in the right column in a twocolumn document

If I want to start to write in the right column of the document in a twocolumn document class how should I do? I have already tried \newpage but it startss new page and \columnbreak results ...
0
votes
0answers
17 views

How can I put a vertical line between the columns? [duplicate]

I know that with "twocolumn" I generate two columns throughout the document. But How can I put a vertical line between the columns?
1
vote
1answer
165 views

How to suppress page break before \twocolumn?

Problem: The command \twocolumn generates a page break in a LaTeX document that is specified as \documentclass[twocolumn]{report}. This specification of the documentclass can not be changed. Question:...
0
votes
1answer
54 views

Two-column Book document class, How to create a proper objective type question paper?

There are three problems: 1. All options of question are not just below the question, they are moving to the next column. (this can be sorted out by using \vspace \vfill \mbox etc.) Is there any way ...
1
vote
0answers
22 views

Attempting to Format Symbol and Text in Two Columns [duplicate]

I use markdown to take school notes. They are later converted, via Pandoc to HTML and PDF (through LaTeX templates). I am trying to typeset a Symbol (floated left) to multiple lines of text. In the ...
1
vote
0answers
156 views

One column table in two columns article [duplicate]

I've found similar posts in the forum, but none is specifically correct for my problem. I'm writing a two columns article (\documentclass[10pt, a4paper, twocolumn]{article}) and I need to break the ...
0
votes
0answers
47 views

How to put figures in continuous manner

I have a double column tex file, I wanted to put to figures in continuous figures. But I am getting gaps. How to fill these gaps with my figure. If it won't fit, try to put in another page. but should ...
0
votes
0answers
15 views

Wrapfigure in twocolumn text [duplicate]

I am trying to wrap a figure in two column text, so that it cuts half of one column width and half of the other column. This is my example of MWE: \documentclass[twocolumn]{article} \usepackage{...
1
vote
0answers
42 views

Column break with twocolumn option

I'm currently creating a new document class that requires the twocolumn option. In that class, I've created a new environment that displays an image on the left column and text on the right one. It ...
1
vote
1answer
39 views

How can I structure subtitles and text in two columns

I'm writing a Techinician User Manual, and I need to know how can I structure text like this figure: Thanks for your help.
0
votes
1answer
27 views

How do you a make onecolumn page and then the next page a twocolumn?

I have a problem making my ACM latex format, I am using the SIG proceedings. When I insert a \onecolumn it creates a page on top. What I want to do is like this. and then the next page is like this.
0
votes
0answers
115 views

to insert a very long table (about 4 pages) in a two-column class

I have to insert a very long table in the tex file, for a two-column class, for example: \documentclass[5p]{elsarticle}. The problem is that: the longtable package does not work in this class (as it ...
0
votes
0answers
71 views

Headers using titleps (and titlesec) don't work with custom section command in twocolumn mode

I am introducing a new (custom) sectioning command (called \subchapter) using the titlesec package. I am also using titleps (or more accurately the pagestyles option for titlesec) to put the title of ...
1
vote
2answers
40 views

How can I write this equation to fit in a single column using IEEEtran?

\documentclass[journal]{IEEEtran} \usepackage{eqnarray,amsmath} \usepackage{amssymb} \usepackage{mathtools} \begin{document} \begin{align} \max\limits_{\bm{P}^{(k)}} & R_k(\bm{P}^{(k)})=\sum\...
2
votes
2answers
158 views

how to use \twocolumn in amsart document class in latex?

I am typing in the following way in my manuscript. \documentclass[12pt]{amsart} \usepackage{amsmath,amsthm} \begin{document} \title{differential equations} \author{sastry} \begin{abstract} some text ...
2
votes
2answers
64 views

Too much space between floats

I have the problem that in two-column mode there is often too much unused space when there are multiple figures or tables in the same column. I would like Latex to automatically shift the figures ...
1
vote
1answer
50 views

The output of formulas in the latex format with two columns style

I am writing a paper for a springier journal. The latex style of this journal is based on the two columns format. I have some equations in my paper and I want to write these equations in paragraphs ...
0
votes
1answer
57 views

Span Image over two Columns without Perturbing the Text Flow

I would like to insert an image into a two-column document, but have the text flow around the image, avoiding to perturb the text flow, like shown here: I tried to do it with the option "strip" from ...
1
vote
0answers
37 views

Single-column table at the top of the first column of a double-column Latex document [closed]

I am writing my paper using Bioinformatics Latex template. I want to insert a single-column table at the top of the first column of this double-column document, but a huge blank is shown in the second ...
0
votes
1answer
18 views

Interaction between pdflscape, multicols and \twocolumn

Testing the following source code: \documentclass[10pt]{article} \usepackage[a4paper,margin=1cm]{geometry} \usepackage{multicol} \usepackage{pdflscape} \usepackage{lipsum} \begin{document} \...
6
votes
1answer
738 views

How to split the text into two columns that both have a different width?

I'm making a report about some code that I've written. I want to split the page into two columns, in such a way that I have code on the left side and (commentary, descriptive, non-code) text on right ...
1
vote
1answer
148 views

How to get two columns in equation

This is my code: \begin{align*} \le \left|\frac{(0,128568071\ \mathrm{\frac{W}{mK}})^2\cdot (0,003686\ \mathrm{m})^2+(0,2709520216\ \mathrm{\frac{W}{mK}})^2\cdot (6,348\cdot 3,686)10^{-3}\ \mathrm{m}}...
0
votes
0answers
53 views

Multicolumn or twocolumn text with reledmac

I am trying to figure out how to get the reledmac package to work with either the multicol package or the twocolumn book class. In my MWE I have two sets of footnotes defined: one is in the paragraph ...
3
votes
1answer
94 views

\marks with two column output

I'm trying to understand how \marks, \firstmarks, and \botmarks works with two column output. In the following MWE, the headers work as I want with one column output. The right mark is the last verse ...
1
vote
1answer
160 views

Why references are not adding from bib file?

Initially, I have added my bib file in the single column and its work correctly, While when I use into two columns format it gives below error. This is BibTeX, Version 0.99d (MiKTeX 2.9.6800 64-bit) ...
1
vote
1answer
354 views

How can I fit a table in a two column article?

I am new to latex. I used this site to create a table for my latex document. However, I need the table be spanned over the second column of the document. How can I do this? Thank you. \begin{table}[...
2
votes
3answers
61 views

I want to write these cases of formula, but I don't know how

This is the formula that I want to write, but I don't know how to do it.
0
votes
2answers
927 views

Placing two images side by side in a twocolumn document

I tried the solution offered in Two figures side by side and on overleaf.com: Positioning images and tables) see at 'Multiple images in one figure'. But both show the image one below the other. Is ...
3
votes
1answer
490 views

How to “force” a footnote to extend over both columns in a twocolumn article?

I am trying to create a template based on a twocolumn article. In order to place some banners on the top of the first page, I had to redefine the \maketitle command, so now the \thanks does not work ...
0
votes
2answers
204 views

Four figures in two column page

Referring to this link, Placement of images in row using subfigure when I use the same code of the tabular format for my two-column page format, it cross the first column width. I have already used \...
0
votes
1answer
35 views

Set right column blank for every page without affecting current template

I want to leave the right side of each page blank for taking notes. A simple way is to use one-column layout instead and change the right margin, but using geometry package will affect current ...
1
vote
1answer
305 views

How to put author affiliations to the bottom left corner in a two-column page

See the template below. The affiliation looks like footnote integrated into text (actually, this is literally the saying in the journal format document).
0
votes
1answer
79 views

Multipage full width table in two-columns document without page break

I'm writing a paper using IEEEtrans, and need to include a long wide table (multipage, full width), but I can't get that the table starts at the beginning of a page without leaving so much empty space ...
2
votes
1answer
111 views

How to put a figure in a two column document to the bottom in one column?

I am writing an article with two columns and want to move a figure to the bottom. This figure is not suposed to cover the two columns, it is just a one column figure that is why I do not use figure*. ...
1
vote
1answer
162 views

figure spanning _one and a half_ columns in two columns environment

I would like to have a figure spanning one and a half columns in a two columns environmnent. I would like to have it aligned to the left side of the page and some text can then be written on the ...
0
votes
1answer
27 views

placing float at the end of second column

I am writing a very simple poster class. There will be some text in two columns and in the right column should be a text box/some floats at the end. Placing them at the bottom is not a problem, but ...
0
votes
1answer
192 views

twocolumn in latex class option, how to set page for every column

I want to make an A3 paper to test student. So I set the latex class option twocolumn. The size of each column is A4 paper. I hope each column with its own page number. When xelatex to PDF, I find ...
1
vote
1answer
81 views

How to “balance” twocolumn document with chessboard?

\documentclass[12pt,twocolumn]{article} \usepackage{chessboard} \usepackage{enumerate} \usepackage[top=2cm,nofoot,bottom=1cm,left=1cm,right=1cm]{geometry} \usepackage{fancyhdr} \usepackage{lastpage} ...
0
votes
0answers
261 views

not able to find the right formatting for Elsevier double column style

I want to use a double column format for Elsevier like this paper, which basically should look like this. However I'm not able to find the right template or figure out the right settings. From their ...
2
votes
2answers
276 views

Force table* to stay in the current page

I have a wide table in my two-column paper. When I use \begin{table*} instead of \begin{table}, although the table becomes on wide, but it goes to the next page and I have limit on the number of pages....
1
vote
1answer
47 views

Column based layout with cell spanning multi pages

I want create a layout which looks like this (porting a document from Word to LaTeX): I tried to use a table to implement this, but the problem is that the text for 'Attr6' can span multiple pages. ...
1
vote
1answer
75 views

Extra vertical space at end of last column when loading adjustbox (only luatex)

I have noticed some odd extra vertical when placing boxes in a twocolumn layout: \documentclass[a5paper]{article} \usepackage{calc} % issue only happens with adjustbox loaded \usepackage{adjustbox} ...
2
votes
2answers
121 views

ConTeXt: How to reduce the width of a \textbackground environment?

Given A \definetextbackground named blockquote is defined as follows: \setupwhitespace[big] \definetextbackground[blockquote][ location=paragraph, style=italicbold, backgroundcolor=lightgray, ...