Questions tagged [venn-diagrams]
Venn diagrams are diagrams that show possible logical relations between a finite collection of sets.
96
questions
0
votes
1
answer
56
views
Drawing disjoint sets with Venndiagram2sets
Here is an example of a venndiagram using the venndiagram package.
\usepackage{venndiagram}
\begin{document}
\begin{venndiagram2sets}
\fillANotB \fillBNotA;
\end{venndiagram2sets}
The ...
16
votes
4
answers
925
views
How to only fill the intersection between three circles?
Yesterday I came across this question: How to draw Venn diagrams (especially: complements) in LaTeX. I was introduced to the idea of intersecting circles and only filling in specific sections defined ...
1
vote
2
answers
35
views
How to labelOnlyAB in venndiagram2sets?
I am trying to labelOnlyAB={9} in this code, but I cannot result.
\documentclass{article}
\usepackage{venndiagram}
\begin{document}
\begin{venndiagram2sets}[labelOnlyA={18},labelOnlyB={24},
...
1
vote
0
answers
29
views
Two sets Venn diagramms for union, intersection and complement [closed]
It took me a while to figure out how to draw the following 2 sets Venn diagramm. So I am posting the code here in case it will make someone's hapiness.
\documentclass{article}
\usepackage{tikz}
\...
0
votes
1
answer
35
views
venndiagram2sets package does not allow pattern in fillACapB
I am using the package venndiagram2sets and I was able to use patterns for most cases:
\documentclass[10pt,twoside,openright]{memoir}
\usepackage[latin1]{inputenc}
\usepackage[english]{babel}
\...
2
votes
2
answers
83
views
How to draw the following specific Venn diagram?
I wish to draw the following Venn diagram as ilustrated below:
I already managed to do the following code, remains to draw the set $I = J \cap X \cap Y$ and to put the the letter J down, according to ...
1
vote
1
answer
120
views
Venn diagram for a complement set [duplicate]
Using Venn diagrams, represent the following sets,
A∪(B∩C).
A'∩(B∪C).
A∩(B∪C').
' represents the complement of a set.
For the first I have the following code,
\begin{venndiagram3sets}[labelA= ,...
1
vote
1
answer
41
views
Dimension too large error when trying to shade, but not before
The following code runs nicely and produces an image:
\documentclass{article}
\usepackage{venndiagram}
\usepackage[margin=0.5in]{geometry}
\begin{document}
\begin{venndiagram3sets}[labelOnlyA={16, 17, ...
2
votes
1
answer
83
views
Graphs on diagrams and on equipotence
Could someone help me to make the following graphs. Thanks.
What I tried for the diagrams was the following,
\begin{center}
\begin{tikzpicture}
\draw (-3.3,-0.4)node[right] {$1$};
\draw (-3.3,-0.8)...
4
votes
1
answer
145
views
A subset of the intersection in a Venn Diagram with tikz
I would like to delete, from the following figure:
the top circle, but without removing the black edge that separate the orange part from the gray part. The figure above has been obtained by the ...
1
vote
1
answer
54
views
venndiagram vs. beamer overlay
I want venndiagram 3sets with beamer overlays.
I tried it:
\documentclass{beamer}
\usepackage{venndiagram}
\begin{document}
\begin{frame}
\begin{venndiagram3sets}[
labelOnlyA={1},
\only<2-...
3
votes
3
answers
610
views
Venn diagram background fill with tikz
EDIT This is not a Venn diagram but an Euler diagram.
ORIGINAL QUESTION
I want to draw a Venn Diagram for an absolute complement. However, I'm having problems with the background filling. The M circle ...
7
votes
3
answers
382
views
Drawing a Venn diagram with three circles in a certain style
My knowledge of tikz is very limited. How can I move the middle circle (M_3) up, so that it looks like a typical Venn diagram?
My progress so far:
My code so far:
\documentclass{article}
\usepackage{...
0
votes
2
answers
130
views
How can I overlap patterns in a Venn diagram legend?
I've drawn a Venn diagram using tikzpicture, with different patterns filling the different circles. I've also used a matrix to draw the diagram's legend off to the side. It's easy enough to create ...
1
vote
1
answer
408
views
How can I fill a tikzpicture "fill" with a pattern?
I'm using the following to generate a Venn diagram, per the example here:
\documentclass{book}
\usepackage{pgfplots,tikz}
\usetikzlibrary{patterns}
\begin{document}
\begin{center}
\begin{tikzpicture}...
1
vote
1
answer
77
views
How to create a simple box that contains another box in Beamer?
I would like to create something like,
or
Does anyone know how to create these simple diagrams?
Note: corner need not be rounded. Text need not be Hello World. Edge color need not to be blue.
1
vote
1
answer
97
views
How to put labels on top of Venn diagram circles?
This is my code:
\documentclass{article}
\usepackage{tikz}
\begin{document}
\begin{tikzpicture}
\tikzset{venn circle/.style={draw,circle,minimum width=4cm}}
\node [venn circle = white] (A) at (0,...
0
votes
1
answer
108
views
Drawing Venn diagrams that is not specifically always two circles
I am wondering about package or a simple way to draw Venn diagrams. I need to draw the following examples:
and as you can see my hand drawing skills are not up to the task :)
I have found the package ...
0
votes
1
answer
171
views
How can I put titles in a Venn diagram?
I 'm trying to make a Venn diagram of number sets (reals, rational, integers, natural numbers). I want every set to have its title and its symbol.
I tried this code
\documentclass{article}
\...
3
votes
2
answers
161
views
Intersection between sets in a Venn diagram with TikZ
I would like the intersection of sets P and Q to be white as in the attached figure.
My command is as follows:
\documentclass[10pt, a4paper, serif, xcolor = {divpsnames, svgnames}]{beamer}
\...
1
vote
1
answer
415
views
Drawing Venn diagram with TikZ
I would like to place the symbol of the universe set (E) on the left side and the sets A and B in the middle of the rectangle with the set B with a white area (as in the attached figure).
My code is ...
0
votes
0
answers
164
views
Venn Diagram Drawing
I am preparing a presentation in Beamer. I want to draw a Venn diagram within a Venn diagram within a Venn diagram :D. I mean three circles from biggest to the smallest where the biggest one ...
0
votes
0
answers
135
views
Error: file `vendigram.sty` not found. \usepackage
I am using TeXstudio and I have the problem that nothing seems to work, after I add the package \usepackage{venndiagram}.
It shows me: Error: file vendigram.sty not found. \usepackage
%%%%%%%%%%%%%%%...
1
vote
1
answer
105
views
Adding a bounding box to an existing figure
Referring to the post:
How to draw Venn diagrams (especially: complements) in LaTeX
using the suggested code:
\documentclass{letter}
\usepackage{tikz}
\def\firstcircle{(90:1.75cm) circle (2.5cm)}
\...
5
votes
1
answer
179
views
Venn diagrams show + - = underneath
I have the following code:
\documentclass{article}
\usepackage{venndiagram}
\usepackage{multicol}
\begin{document}
\begin{figure}
\begin{multicols}{4}
\centering
\begin{venndiagram2sets}[...
8
votes
5
answers
2k
views
How to draw a Venn diagram for X - (Y intersect Z)?
I need to draw a Venn diagram for$ X - (Y \cap Z), but I can only figure out how to get $X - (Y \cup) Z)? Can anyone help?
\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{shapes,...
0
votes
1
answer
177
views
LATEX: How to make venn diagram with partition and shades
I would like to create the attached venn diagram and show different variations with shading different areas:
I'm super new to latex and not sure how to do this. I found a solution on how to make the ...
3
votes
1
answer
292
views
Venn Diagrams for 4 sets
I was able to modify Loop Space's code (the first answer found here: How to generate all possible Venn diagrams (with the case below) efficiently?) to draw a Venn diagram for four sets using ellipses. ...
3
votes
1
answer
625
views
How to apply a clipping mask with TikZ
Without rewriting the code, I want the part where the circles overlap to be transparent so it appears white (or whatever colour is hiding behind the circles).
Graphic designers might refer to this ...
4
votes
2
answers
141
views
Node positioning in Venn diagram
Consider the following MWE:
\documentclass{article}
\usepackage{tikz}
\usepackage{amsmath}
\usetikzlibrary{calc}
\begin{document}
\begin{tikzpicture}
\draw (0,0) rectangle ...
7
votes
2
answers
411
views
Remove intersect line for one circle using venndiagram2sets
Problem:
I wish to remove the intersecting line for circle A (left).
Minimal Working Example (MWE):
\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{backgrounds,positioning}
\usepackage{...
1
vote
2
answers
322
views
Create intersect for Venn diagram and resize circles to adjust to box size
Problem:
Two minor issues which I have not been able to solve.
How do I fill the intersection for the second figure (on the right)?
How do I create "padding" or more "air" around the circles in each ...
2
votes
1
answer
183
views
Change command in package
Im trying to use the venndiagram package but i want to change the colour it fills in the areas. Currently if you use the code for example
\begin{venndiagram2sets}
\fillOnlyA \fillNotAorB \fillA
\end{...
3
votes
2
answers
146
views
How to make an equation of Venn Diagrams with the symbols aligned properly?
Essentially what the question says.
My code right now is
\documentclass{article}
\usepackage{venndiagram}
\usepackage[margin=1in]{geometry}
\begin{document}
$
\begin{venndiagram2sets}[showframe = ...
0
votes
1
answer
265
views
How to add two labels inside one set of a two set venn diagram using venndiagram.sty?
I've managed to include both of the Venn Diagrams that I needed, but now I can't add a "X" letter inside the "B" set, while maintaining its label of "B"
This is what I need to do:
And this is what I'...
2
votes
1
answer
248
views
How to adjust Venn Diagram for A^c and A - B
How can I adjust this venn Diagram so it becomes like what I wrote on the Image below?
I need to Color the "M" rectangle on the third Diagram and to remove the intersection between A and B on the ...
5
votes
3
answers
597
views
How can I draw a rectangle around venn Diagrams?
I have tried some of the solutions to similar questions, but none of them included minipages, which seems to be the problem (I`m fairly new to LaTeX)
So, here's the coding:
% Definition of circles
\...
5
votes
1
answer
715
views
Shade part of a Venn diagram
Can someone show me how to shade the yellow region by modifying my code?
Thank you in advance guys :)
\documentclass[]{article}
\usepackage[margin=0.5in]{geometry}
\usepackage{pgfplots}
\renewcommand{...
2
votes
1
answer
623
views
How can I draw a Venn diagram with multiple circles contained in a circle?
Exactly like I can't figure out where to start. I don't know why Tikz confuses me so much.
1
vote
1
answer
593
views
Three-sets Venn diagram using TikZ with comments/labels inside and outside the circles
I am trying to produce a three-sets Venn diagram illustrating my research agenda and my published work. I am having a hard time including the comments inside the circles, particularly regarding the ...
7
votes
2
answers
985
views
Venn Diagrams and Patterns
As a teacher, I really appreciate the venndiagram usepackage with its functionality. Is there a way to fill the sets with patterns instead of a solid color (for better printing)? Something along the ...
3
votes
1
answer
183
views
Many Venn diagrams in one page using tikz
I would like to draw six figures in a single page, in order to explain inclusion and intersection of sets.
I thought of 3 rows, 2 figures per each row. I'm trying the following way:
\documentclass{...
2
votes
1
answer
390
views
Shading Circle Segments in a complex Venn diagram
I have a Venn diagram with some overlapping ellipses that I segmented into sections using lines.
I want to use this to make a few figures, and I am wondering wether there is a clever / clean way to ...
5
votes
3
answers
713
views
Venn diagram outlines
I am using the venndiagram package to... well, draw Venn diagrams.
I know it's considered a very basic package, but it works well for my purposes.
Except for one thing.
Both the venndiagram2sets ...
-1
votes
1
answer
517
views
drawing in latex simple [duplicate]
I have a presentation. I want to draw it in latex and put in on my slide. Some kind tell me where to begin or tell me the code
1
vote
1
answer
95
views
Suset codes in venndiagram package
Looking for ways of doing the following:
Drawing set A inside set B;
Coloring different sets differently.
2
votes
2
answers
3k
views
Venn Diagram using tikz
EDIT::
I saw the question mentioned in here which the moderator considered mine duplicate. However, I couldn't see how mine is duplicate. My main problem is to write the text in the intersection of ...
6
votes
1
answer
920
views
Different highlight or filling of circles in Venn diagram with 3 sets
The venndiagram package is used to draw the three sets Venn diagram.
How can I fill subsets of this diagram with different shade, lines, symbols like pluses + etc?
The desirable interface of ...
4
votes
3
answers
3k
views
Venn Diagram in LaTeX for $C\setminus (A \cap B \cap C)$ [duplicate]
\begin{tikzpicture}[fill=gray]
\scope
\clip (2.7,-2.54) rectangle (-1.5,1.5)
(0,0) circle (1)
(1.2,0) circle (1);
\fill (0.6,-1.04) circle (1);
\endscope
...
0
votes
0
answers
314
views
How can I fill complement of two sets A and B knowing that A is subset of B with venndiagram? [duplicate]
I want to fill
\documentclass[12pt]{standalone}
\usepackage{pgf,tikz}
\usetikzlibrary{arrows}
\usetikzlibrary{patterns}
\begin{document}
\begin{tikzpicture}[line cap=round,line join=round,>=...