Questions tagged [wrapfigure]

{wrapfigure} is an environment defined by the`wrapfig` package that allows text to flow around floats.

Filter by
Sorted by
Tagged with
0
votes
0answers
18 views

How to put two plots in one figure, vertically? [duplicate]

I have two histograms. Together they tell one story, so I want to put them in one figure. I want to stick to one column format, therefore I want them vertically. How can I do that? I've only seen ...
0
votes
1answer
17 views

breaklines=true does not work next to wrapfigure

I have some text with code next to a figure. I am currently using \begin{wrapfigure} with 0.5\textwidth and lstinline[breaklines=true], but my code won't break: \paragraph{Rx-Pipeline} \begin{...
0
votes
0answers
19 views

How to include a floating image at the left of an itemize?

I've been having some problems with "wrapfigure". I'm supposed to fix this with {L} instead of {l} ( Source) but it doesn't work because of the bullets. Code: \begin{wrapfigure}{L}{5cm} \...
1
vote
1answer
31 views

Text alignment after wrapped figure

After the wrapped figure, my text has a Center alignment. How can i return to the document's Format (i mean the text back on the left side) again? Thanks \begin{wrapfigure}{l}{0.25\textwidth} \...
0
votes
0answers
20 views

Figure at right side total page

I can't set position of figure in the right side of total current page. Thanks for your helps. Here is my code : \subsection{Text} Text \begin{itemize} \item Some text \item Some text \end{...
1
vote
3answers
27 views

Problem with wrapfigure when left positioning the figure

I have the following piece of brief code. As you see, when I am using verbatism after the wrapfigure in the left mode {l}, the generated pdf file is a mess. But it is ok if I use wrapfigure with {r}. ...
0
votes
1answer
42 views

Multiple errors with trying to wrap a figure

I want to wrap a figure so that it is on the right side of the paragraph but when I try to compile it, I get these errors: This is my code for that part: \documentclass[12pt]{extarticle} \...
2
votes
2answers
47 views

Going mad with \wrapfigure and \itemize conflict

I am trying to insert an image floating in a bullet point list, in beamer. Sadly the result is that the image is put in a new frame, following the one where I insert the code. Moreover, I am not able ...
0
votes
2answers
34 views

Columnar figure over full page in one column layout

In a one column document, I want to place a tall/narrow figure over the full height of a page - while the text is in a column besides it. I tried with wrapfigure - but it seems to always anchor the ...
0
votes
1answer
62 views

Why does `wrapfigure` leave so much vertical space?

\subsection{Intrinsic Rewards} Most exploration approaches struggle, when the rewards for actions have long delays (i.e. when rewards are sparse). Recall our room navigation example again, and imagine ...
0
votes
1answer
30 views

wrapfig not working with llncs

I am trying to split a single column page to double column such that figure appears on the left half and text appears on the right half. I try to achieve it using wrapfig \documentclass[runningheads]...
0
votes
1answer
24 views

lstinline with breaklines=true conflicts with wrapfig, causing warnings

The following MWE shows a warning, printed below: \documentclass{article} \usepackage{listings} \usepackage{wrapfig} \lstset{breaklines=true} \begin{document} \begin{wrapfigure}{r}{0.5\linewidth} ...
1
vote
1answer
30 views

Incorrect figure numbering using wrapfigure

I am having an issue with wrapfigure and I can't seem to find a solution anywhere. Not even in the documentation. What happens is as follows: I have a wrapfigure environment in my code followed by a ...
1
vote
1answer
42 views

Make wrapfigure span over two exsheets questions

How to make a long vertical image (using wrapfig) span over two questions from exsheet package? The following code does not produce a satisfactory result. \documentclass{book} \usepackage{lipsum} \...
0
votes
0answers
27 views

Wrapfigure doesn't work within my environment

I have my own environment art and when I place a picture in wrapfigure in this environment it just go after art. It seems to be my environment because when I delete it from style, wrapfigure works ...
0
votes
0answers
35 views

How can I do a box for biographies?

I would like to do a box with 2 biographies. I have a code that it works but the box results small: Like you see, the box is tight so I want to do it wider. %Formato \documentclass[a4paper]{...
1
vote
1answer
34 views

use package typewriter with wrapfigure

I would like to have two pictures side by side on the right side of the page with text floating around. This works fine until I try to use the package typewriter. Then the two pictures are one upon ...
0
votes
0answers
22 views

wrapfigure modifying entire document

I am composing a cv without using any predefined documentclass like, e.g, moderncvn for which I have written a code that goes like this: \documentclass[12pt,a4paper]{article} \usepackage[a4paper]{...
2
votes
0answers
24 views

Wrapping figure inside item in enumerate package [duplicate]

I have got several cases in my article with a brief description of each. I would like to add a drawing wrapped with text. To highlight my cases I use enumerate package. Unfortunately it doesn't ...
1
vote
1answer
24 views

caption under image too short

I want to put an image completely to the right of my document. However when I want the caption under it, the caption breaks in the middle and appears in parts under the image. But I want this caption ...
2
votes
2answers
72 views

Place `tikzpicture` on the left of the text

Background I’d like to write a LuaLaTeX document for the Roman Catholic Liturgy of the Holy Week (from the Psalm Sunday through Easter Sunday). I do this in Slovak language (here’s a pdf that uses ...
0
votes
1answer
37 views

Inserting the image intro the text

I am currently working on the project and trying to add images into the text. I want images to be wrapped. I am adding them after the paragraphs since otherwise Overleaf marks it as a mistake. I am ...
3
votes
2answers
185 views

Moving a wrapfig vertically to encroach partially on a subsection title

It sounds like very poor typography, but I am simply looking to shift a wrapfig picture up, but in particular so it would ever so slightly go above the start of the paragraph and into the subsection ...
1
vote
1answer
34 views

Set \minipage within \Declarecaptionformat width to match figure

I'm trying to set up captions in my document to all have a certain format, as can be seen in the screenshot: I'm doing this through the caption package, as can be seen in this MWE: \documentclass[...
1
vote
1answer
153 views

How to remove the word “Figure” from a caption?

How to remove a caption when using figure. I need to have a figure with no captions or the word Fig \Figure[!t]()[width=1\textwidth]{figures/loc.pdf} {certain caption. }
0
votes
1answer
56 views

I want to wrap my figures and put tables side to side but the combination of packages has bad results

I'm writting my thesis and I want to wrap figures so I use the \usepackage{graphicx,wrapfig,lipsum}. In the material and methods I want to put some tables side to side so I use the \usepackage{...
0
votes
1answer
38 views

How can I stop automatic changes in the text spacing when using the package wrapfigure?

I am using wrapfigure to position a figure on the right side of my document. However when I do it the text to the left increases in both vertical and horizontal spacing. It is not a huge amount but it ...
1
vote
1answer
137 views

Wrapfigure doesn't show the image and add blank column

Writing my PhD I come across an unusual issue. I just want to add another wrapfigure (no issue before) but this one shows me only a blank space where the figure should be placed and on the next page - ...
0
votes
0answers
25 views

Consecutive wrapfigures of different widths

I have to insert two pictures of different width one below the other on the side of a text, and wrap the text around. I'd like the pictures to stay close to each other, so I don't want any text but ...
2
votes
0answers
59 views

Text wrap of an object

I didn't manage to deal with a wrapping of my object. The object is made by function (that I found here), which is an LFG f-structure. I would like to place it on the right side of the page, and ...
0
votes
0answers
47 views

WrapFigure bottom spacing issue

I'm currently facing an issue where a wrapfigure is making some lines not use the whole line, to make it clearer here's a picture: As you can see there's plenty of space for the line to use, yet ...
3
votes
2answers
65 views

How do I raise a figure (placed with wrapfig) to be flush with the top of a paragraph?

I am using the wrapfig package to place a figure with text wrapped around it. Here is a minimal example, with a screenshot of the relevant part of the output below: \documentclass{book} \usepackage{...
2
votes
2answers
50 views

Wrapfigure wraps and then floats again

(My first post - please let me know if/how I can improve my questions in the future!) (Modified to include a complete example file) The code in question is automatically generated via a script. There ...
0
votes
1answer
51 views

Wrapping text around a displayed equation2

I found this solution to explain some details of some equations. In the first case I added \begin{minipage}[h]{0.95\textwidth}..... while the second case is taken from the previous discussion. I'm ...
0
votes
0answers
209 views

Wrapfigure unrecognized environment

TeXstudio has highlighted this for some time. same problem indicates it in the commands: \tikzmarknode{}, \eqdescbox, \dimexpr I have no problems in compiling the pdf file, I only see these things ...
0
votes
2answers
239 views

Why does not 'wrapfigure' and its paragraph show together?

wrapfig is typically used with an intention to typeset it side by side with a certain text that should wrap it. However, when I use a lot of floats near wrapfig, a part of all of the text will not ...
1
vote
1answer
52 views

Minimize white space below figure

I tried following a few threads to minimize the white space below my figure. It seems straightforward, but it's not working. Maybe it could be that I'm trying to do this in an Appendix environment? I ...
6
votes
2answers
857 views

How to wrap a figure in exam document?

I can wrap in ARTICLE, but not in EXAM. How to wrap in EXAM? (Question Plus-if you´re a LaTeX master-.- What´s the mosr suitable and easy package to do this kind of things?) I can wrap a figure in an ...
0
votes
0answers
41 views

Why does `endfloat` package reserve a whole page for each float when they are small enough to be put together?

I use endfloat package to stack all floats after the document has ended, but it seems that even if some floats are small enough to be put together in one page, endfloat will still place each one in a ...
1
vote
0answers
41 views

Wrap figure first line alignment changed when using right alignment

Text properly aligned with wrap figure images on justify alignment, in the case of right alignment text, first line break with two or three words even the space occurs to fill the gap. Please suggest ...
0
votes
0answers
14 views

Wrapfigure in twocolumn text [duplicate]

I am trying to wrap a figure in two column text, so that it cuts half of one column width and half of the other column. This is my example of MWE: \documentclass[twocolumn]{article} \usepackage{...
0
votes
1answer
112 views

Using subfigures in a wrapfigure with proper captions

I am trying to create a wrapfigure that has two subfigures. Normally when I create subfigures, I use the following structure: \begin{figure}[h] \centering \begin{subfigure}{.5/textwidth} \...
0
votes
0answers
31 views

Wrapfigure doesn't stop

Title. I want the next page to start as a full line but wrapfigure doesn't do that. Thank you. \documentclass[9pt]{extarticle} %symbols \usepackage[version=4]{mhchem} \usepackage{siunitx} %...
2
votes
2answers
293 views

Position figure (left, right, center ) minipage, wrapfigure etc.. and equation

I'm having a problem with the position of the equations and the image. how come the second and third equations have an indentation and are not aligned? (in particular the second one). I think that by ...
4
votes
1answer
169 views

How to wrap text around part of a figure

I am looking for wrapping some text around part of a figure in the following way: Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean quis mi ut elit interdum imperdiet quis non ante. +--...
1
vote
1answer
30 views

Having trouble with wrapfigure including tikzpicture through a text

I am sorting kind of economic definitions as you see (it is Persian). There is a picture which I made it by tikz package in an elementary way. I am going to use wrapfigure just to make a text good ...
0
votes
1answer
572 views

Problems with wrapfigure

Since 28 Jan, 2019 (several days ago), I've been trying to get text to wrap around any figure in my document and I have several. I cannot get the package wrapfigure to work. I've tried following all ...
1
vote
1answer
78 views

Wrapping figures in an article

I am trying to create a protocol and for that I though that article is a nice suitable document class. My problem comes when I try to wrap an image at the left side of the text. I use: \begin{...
-1
votes
1answer
55 views

Figure Position

Can anyone help me with this problem? I have done various things including finding answers on internet, but I did not find a solution. I want to put the image in the text on the left in the first ...
3
votes
1answer
97 views

prevent blank area caused by wrapfigure in multicol environment

I'm using wrapfigure inside a multicol environment to wrap my text around a tikz graph. This however creates an unwanted blank area in the second column (after \columbreak). How can I prevent this? ...