Questions tagged [wrapfigure]

{wrapfigure} is an environment defined by the`wrapfig` package that allows text to flow around floats.

Filter by
Sorted by
Tagged with
0
votes
0answers
13 views

Problems with wrapfigure, numbers appear in front of photo

I'm new to Latex but trying to put in a photo in a CV, using wrapfigure. The intention is to fit it on the same line as some text, which works fine as long as the {l}{0.3\textwidth} is included. The ...
0
votes
0answers
31 views

Caption placement for figure on the right

I often want to place figures on the right and let the text flow around it using wrapfig. For small figures this is nearly always an issue because the caption will be smushed together and extend over ...
1
vote
0answers
41 views

Wrapping Figure within multicolumn text

I got the problem that my image is not positioned correctly within the first text column. I only want that the image is not overlapped with some text. How to wrap the text around the image correctly ...
0
votes
0answers
43 views

WrapFigure package drifting off to the left side, how do I prevent this behavior?

I want my images on the right side of the PDF to maintain alignment on the right side and not "drift off" to the left side, as can be seen in here: I only run into this issue when there are ...
0
votes
0answers
21 views

Error using wrapfigure

I am trying to use wrapfigure but I cannot get it to work each time I get the error Latex Error: Environment wrapfigure undefined. I have included \usepackage{wrapfig} in my document and the script I'...
1
vote
1answer
43 views

How to control the whitespace below wrapfigure?

I'm currently working on a term paper on neural networks that I'm writing in LateX. I have an itemize environment (with different activation functions) and want to display the graphs of the ...
1
vote
1answer
74 views

Side Text box placing

I am new to latex. Can't figure out how to put a side text box. I tries using \usepackage{wrapfig} but as it is inside enumerate it can't be done. Here is an image of what I want to do. left one is ...
2
votes
1answer
80 views

Wrapfigure and adjust it vertically

I did use the wrapfigure environment to put the two figures, 4 and 5, on the right of the text, but its position is lower than the text. I want it to be on a higher position. Here's my code : \...
0
votes
2answers
48 views

Extra vertical space using wrapfigure environment

\documentclass{article} \usepackage{tikz-cd,wrapfig} \begin{document} \noindent \begin{wrapfigure}[4]{r}{0pt} \includegraphics[width=2cm]{test.png} \end{wrapfigure} 2. test test test test test ...
3
votes
3answers
81 views

Wrapfigure two figures left and right with text in between

I wish to accomplish something like: Where 1 and 2 are images. 1 is aligned to the left and 2 is aligned to the right. All text between those should be as illustrated with lines in the image. My ...
2
votes
1answer
34 views

Get height of figure and caption - for wrapfigure pagebreak detection

I want a function that automatically detects if a figure and its caption will run of the page when used within the wrapfigure environment, such that it will stay with the text that I placed it with in ...
0
votes
0answers
25 views

How to automatize a distance for starting after images/test wrapped?

I´d like to create multiple tcolorboxes with variable images width and hegiht (because I´m going to use 1,2, 3 or 4, in portrait or landscape) and variable text on the right, usually with less height ...
0
votes
0answers
21 views

wrapfig: titlesec stops figure from appearing

Simply importing titlesec into my document stops a figure in the wrapfigure environment from appearing: If I comment out \usepackage{titlesec}, I get the expected result: \documentclass{article} \...
1
vote
2answers
54 views

How can I have left-aligned wrapped images in some paragraphs in a two-column text layout?

I have a two-column layout for my text and I want to have a image glossary where each image in the glossary has a single paragraph description and a the image wrapped to the left of the text. I have ...
1
vote
1answer
54 views

Wrapfig environment is overlapping text

I am trying to write some text around an image, however the text gets drawn on top of the image rather than around it: This is the relevant code section: \section*{De Boor's algorithm} \begin{...
1
vote
1answer
58 views

Wrapfigure in a headerbox

I have a poster (baposter) with 3 columns and headerboxes and I want to use the \wrapfigure function so that my text wrap around my figures. The function doesn´t seem to work within a headerbox. I ...
0
votes
0answers
15 views

exam/wrapfigure: Text doesn't wrap around the figure [duplicate]

For the following MWE, why is the first image overlayed with the text when using \lipsum instead of pasting dummy text? And how to fix the other two images to be placed properly next to their ...
0
votes
1answer
28 views

Strange interaction between aligned environment and wrapfigure

I am attempting to wrap document text around the equation below using the following code. \begin{wrapfigure}{left}{0pt} $$ \begin{aligned} \sum\limits_{i=0}^{15} \frac{\cos{\frac{(2i+17)\...
2
votes
2answers
86 views

Text around boxed/framed equation

I want the text closer to my equations, but the equations jump down a line. The equation box also insists on centring itself instead of sticking to the margin. Is there a way to automatically adapt ...
0
votes
1answer
38 views

How to remove additional space under wrapfigure when using vspace in text

I'm creating some custom environments. One of them will be placed in \wrapfigure and second one will contain text which should wrap around the first one. When I'm adding \vspace between paragraphs, ...
0
votes
1answer
59 views

Issue with text wrapping around figures in LATEX

I am trying to write document (class article) with floating figures. I have found an issue with wrapping of text around some figures - The main text overlays part of the figure or caption. The figures ...
1
vote
1answer
23 views

Having difficulty identifying where the underfull \hbox error is coming from in this WME

I ran in to a underfull \hbox error in a proposal I am writing and am trying to understand if the error is in the caption or text. Also, it seems lipsum does not play nice with wrapfigure, but in my ...
0
votes
1answer
48 views

Getting weird wrapfigure behavior in Latex, please help

Not sure what is happening but here is the code: \end{minipage} % ends minipage containing algorithm2e \lipsum[2] \begin{wrapfigure}{l}{0.3\linewidth} \ExecuteMetaData[Chapters/3_Concept/4_PAaP/...
0
votes
0answers
45 views

Wrap text around picture in fancyhdr header

I would like to be able to wrap the text around the logo in the fancyhdr reader on all other pages than the first. As you can see on the screenshot there is text over the logo. I do not want to ...
1
vote
0answers
58 views

Problems about Biography part

I have two problems with the biography part of my paper. Based on the attached picture: 1) about the blue part, I do not know how to remove the surplus blank space which is colored by blue. I mean, ...
5
votes
2answers
179 views

Wrap text around tikzpicture environment

I've been trying to use the exam environment to produce nice solutions for an exam. My hope is to have the solution include a figure using tikzpicture and pgfplots and then have text wrapped around ...
1
vote
2answers
75 views

Two wrapfigure overlapping; delay starting point of wrapfigure associated text

Working on my thesis and I want to have two wrapfigures (left and right) fit in one page. To be able to do this, one has to go inside the text area of the other. How can I delay locally the start of ...
0
votes
0answers
21 views

\setlength{\leftskip} affects the “wrapfigure” environment

For some reason, I need to indent every paragraph, and so I'm using \setlength{\leftskip}. However, when I use this command, wrapped figures are pushed right as far as the indentation, as shown below....
1
vote
1answer
47 views

Footnotes do not respect Wrapfig

I am using the wrapfig package but footnotes are not properly wrapping: Here is the source \documentclass{article} \usepackage{graphicx, wrapfig} \graphicspath{ {./images/} } \title{Learning to ...
0
votes
0answers
26 views

How to avoid the blank space at the bottom of the wrapfigure

I want to add a figure at the right of the text like in the figure. I have used the wrapfigure option but a blank space appears at the bottom of the figure. The code I am using is the following: \...
0
votes
0answers
28 views

How to put two plots in one figure, vertically? [duplicate]

I have two histograms. Together they tell one story, so I want to put them in one figure. I want to stick to one column format, therefore I want them vertically. How can I do that? I've only seen ...
1
vote
1answer
39 views

breaklines=true does not work next to wrapfigure

I have some text with code next to a figure. I am currently using \begin{wrapfigure} with 0.5\textwidth and lstinline[breaklines=true], but my code won't break: \paragraph{Rx-Pipeline} \begin{...
0
votes
0answers
30 views

How to include a floating image at the left of an itemize?

I've been having some problems with "wrapfigure". I'm supposed to fix this with {L} instead of {l} ( Source) but it doesn't work because of the bullets. Code: \begin{wrapfigure}{L}{5cm} \...
1
vote
1answer
104 views

Text alignment after wrapped figure

After the wrapped figure, my text has a Center alignment. How can i return to the document's Format (i mean the text back on the left side) again? Thanks \begin{wrapfigure}{l}{0.25\textwidth} \...
0
votes
0answers
23 views

Figure at right side total page

I can't set position of figure in the right side of total current page. Thanks for your helps. Here is my code : \subsection{Text} Text \begin{itemize} \item Some text \item Some text \end{...
1
vote
3answers
45 views

Problem with wrapfigure when left positioning the figure

I have the following piece of brief code. As you see, when I am using verbatism after the wrapfigure in the left mode {l}, the generated pdf file is a mess. But it is ok if I use wrapfigure with {r}. ...
0
votes
1answer
61 views

Multiple errors with trying to wrap a figure

I want to wrap a figure so that it is on the right side of the paragraph but when I try to compile it, I get these errors: This is my code for that part: \documentclass[12pt]{extarticle} \...
2
votes
2answers
83 views

Going mad with \wrapfigure and \itemize conflict

I am trying to insert an image floating in a bullet point list, in beamer. Sadly the result is that the image is put in a new frame, following the one where I insert the code. Moreover, I am not able ...
0
votes
2answers
56 views

Columnar figure over full page in one column layout

In a one column document, I want to place a tall/narrow figure over the full height of a page - while the text is in a column besides it. I tried with wrapfigure - but it seems to always anchor the ...
0
votes
1answer
82 views

Why does `wrapfigure` leave so much vertical space?

\subsection{Intrinsic Rewards} Most exploration approaches struggle, when the rewards for actions have long delays (i.e. when rewards are sparse). Recall our room navigation example again, and imagine ...
0
votes
1answer
53 views

wrapfig not working with llncs

I am trying to split a single column page to double column such that figure appears on the left half and text appears on the right half. I try to achieve it using wrapfig \documentclass[runningheads]...
1
vote
1answer
47 views

lstinline with breaklines=true conflicts with wrapfig, causing warnings

The following MWE shows a warning, printed below: \documentclass{article} \usepackage{listings} \usepackage{wrapfig} \lstset{breaklines=true} \begin{document} \begin{wrapfigure}{r}{0.5\linewidth} ...
1
vote
1answer
118 views

Incorrect figure numbering using wrapfigure

I am having an issue with wrapfigure and I can't seem to find a solution anywhere. Not even in the documentation. What happens is as follows: I have a wrapfigure environment in my code followed by a ...
1
vote
1answer
63 views

Make wrapfigure span over two exsheets questions

How to make a long vertical image (using wrapfig) span over two questions from exsheet package? The following code does not produce a satisfactory result. \documentclass{book} \usepackage{lipsum} \...
0
votes
0answers
35 views

Wrapfigure doesn't work within my environment

I have my own environment art and when I place a picture in wrapfigure in this environment it just go after art. It seems to be my environment because when I delete it from style, wrapfigure works ...
0
votes
0answers
45 views

How can I do a box for biographies?

I would like to do a box with 2 biographies. I have a code that it works but the box results small: Like you see, the box is tight so I want to do it wider. %Formato \documentclass[a4paper]{...
1
vote
1answer
38 views

use package typewriter with wrapfigure

I would like to have two pictures side by side on the right side of the page with text floating around. This works fine until I try to use the package typewriter. Then the two pictures are one upon ...
0
votes
0answers
28 views

wrapfigure modifying entire document

I am composing a cv without using any predefined documentclass like, e.g, moderncvn for which I have written a code that goes like this: \documentclass[12pt,a4paper]{article} \usepackage[a4paper]{...
2
votes
0answers
24 views

Wrapping figure inside item in enumerate package [duplicate]

I have got several cases in my article with a brief description of each. I would like to add a drawing wrapped with text. To highlight my cases I use enumerate package. Unfortunately it doesn't ...
1
vote
1answer
32 views

caption under image too short

I want to put an image completely to the right of my document. However when I want the caption under it, the caption breaks in the middle and appears in parts under the image. But I want this caption ...

1
2 3 4 5
11