# All Questions

239,995 questions
Filter by
Sorted by
Tagged with
3 views

### Why the number of first table is zero in latex?

I have prepared an article in LaTeX. There is 6 tables in this paper. The number of first table (table caption) apear in zero!. Why the number of first table is zero in latex? How can I convert it in ...
11 views

### Control table height

I'm trying to create a table with mailing adresses to print so what I need is to match my table dimensions to the pre-cut sticker paper. So far I've managed to control column width with p{\dimexpr 0....
• 101
11 views

### Aligning several equations that are each in the box (MathJax)

I'm using MathJax. How to aligning several equations that are each in the box like this one: Aligned at "=" I've tried using \fbox like these: \begin{align} \fbox{$2x-4y+3z &= 6$} &...
19 views

### File subscript.sty' not found. \usepackage

I recently wanted to start writing thesis. However I got this error. I installed the "fragments" name folder from miktex since the subscript.sty was not available in miktex. Searching ...
• 219
1 vote
24 views

### How to add zero before a decimal point (e.g. from .07 to 0.07) in Latex tables?

I have exported many Stata tables to Latex. But I later realized I need to add leading zeros before decimals (e.g. .07 to 0.07 or -.07 to -0.07) in the tables. I know how to do this in Stata, but I ...
• 11
26 views

### How can I remove the excess slash from middle of the table?

Hello! I'm trying to remove the excess slash as you can see attached below. I don't know how to do it and i can't even find it. I just want to maintain the slashes at both sides of the table. \...
1 vote
28 views

### How can I reply this type of alignment? And, How could I add a "constant" text to all even rows?

I would like to define an environment to have different alignments in even and odd rows, and add the equiv symbol in all even rows.
27 views

### Visual representation of Deep Neural Network

How can I add one more identical hidden layer to the artificial neural network visualization generated by this code? Code reference: Neural Network Diagram Code: \documentclass[border=0.125cm]{...
24 views

### NewDocumentCommand enumerate macro not working with linebreak while \newcommand does work

In the following code, I write two macros for \begin{enumerate}...\end{enumerate}. In trying to get more than one optional argument, I used the method in More than one optional argument for newcommand....
• 583
1 vote
25 views

### Tikz embedded in postnote biblatex citation

I am trying to create a custom postnote in a citation for a project where I need to subtly highlight some citations. I would like to draw two semicircles, filled with different colors, and display ...
• 11
1 vote
20 views

### memoir error with \stockheight under pdflatex-dev

Processing the following source... \documentclass{memoir} \begin{document} Hello. \end{document} ... with the pdflatex-dev command now gives error as shown here: This is pdfTeX, Version 3.141592653-...
• 6,731
22 views

Package doclicense is now incompatible with the new pdfmanagement when the latter is, as I understand it, invoked automatically by the \DocumentMetadata command. And the cause seems to be that ...
• 6,731
47 views

### Enabling bold font with palatino [closed]

I am using Palatino and changing to bold font has not been successful. \documentclass[b5paper,12pt]{article} \usepackage[body={13cm,18cm}]{geometry} \usepackage{pxfonts} \renewcommand{\...
• 195
59 views

### How to make division of polynomials with latex?

How to make division of polynomials with latex?
• 319
59 views

### How can I draw this figure

I found this picture in a book (Ultrafiltration by M. Cheryan). I need to draw something like this. Is it possible using Latex or do I need a plot software?
• 11
1 vote
25 views

### ConTeXt: XML processing and buffers

Knowing that buffers and macros don't play well together, I started with the Verbatim XML guide from the wiki. However manipulating the catcode table is insufficient when trying to pass xmlflush into ...
• 163
18 views

### qrcode failed in exam-zh class [duplicate]

MWE: \documentclass{exam-zh} \usepackage{qrcode} \begin{document} \qrcode{https://gitee.com/xkwxdyy/exam-zh} \end{document} Compile it with xelatex and it will produce something strange(at least ...
• 571
15 views

### Entry type for … isn't style-file defined

I'm using overleaf and I have this warning: entry type for "hadoop" isn't style-file defined entry type for "spark" isn't style-file defined Here is the citations for them: @...
49 views

### Specific problem with \newcommand entries [duplicate]

I am trying to write my CV. I used one of the templates, which has: Education Entry \newcommand{\EducationEntry}[4]{ \noindent \textbf{#1} \hfill % Study \colorbox{Cyan}{% ...
• 101
25 views

### \align* inside minipage inside \align*: Argument of \align* has an extra }

My document is obviously much more complex than this, but my reproduction is simple: \documentclass{letter} \usepackage{amsmath} \begin{document} \begin{align*} stuff &= \begin{minipage}[t]{...
• 297
59 views

### tikz circuits: How to change color of resistor "adjustable" arrow?

I am trying to change the color of the arrow that is added to a resistor to indicate that it is adjustable. I can only seem to change the color of the resistor symbol, the wire to/from the resistor, ...
• 165
20 views

### How can I reduce the all lines height in \lstinputlisting

I want to reduce all lines' height (empty space between each line) in \lstinputlisting, is it possible? Original code is taken from https://tex.stackexchange.com/a/660320/127048 , only \usepackage[...
• 904
37 views

### Error Message: Argument of � has an extra } but I am not missing any } [duplicate]

Hello I tried compiling the following text (error location indicated with *********): \section*{Research Issues} This section identifies research problems and what caused these issues. This section ...
35 views

### PGFPlots cube* colour in legend

I'm using a scatter plot with cube* markers. All is fine with with the plot itself, however, in the legend the cube* appears in black. Is there a way to configure the colour used by the legend? A ...
1 vote
19 views

### TeX4ht: \displaystyle in eqnarray and align environments

I am using tex4ht to convert a LaTeX document to HTML. I would like to know how to obtain a full display of equations either in the eqnarray or in the align environments. The following snippet ...
34 views

### Latex Environment with named optional parameters

Is there a way to get a string options in \NewDocumentEnvironmentor \newenvironment ? i.e \begin{foo}[color=red,size=12pt] \end{foo} where the environment is defined as \NewDocumentEnvironment{foo}{}...
1 vote
58 views

### What's the font name of librebaskerville?

I can load the package 'librebaskerville' but I can't seem to refer to it in commands that take the name of a font. Here's a short .tex file to demonstrate: \documentclass{article} \usepackage{...
• 565
18 views

### Overlaying a tikzpicture on beamer

I am trying to use an overlay system on a beamer slide in order to display successively several images. I start by displaying a blank box containing some text (using \itemize) then I add an associated ...
• 389
55 views

### Draw circuit op-amp with current direction [closed]

Is it possible to draw this diagram in LaTex (with circuititkz) with arrows indicating the current direction at the nodes? I've been struggling with it for quite a time now.
11 views

### Labeling and referencing a theorem color box

In the code below, I fail to cross reference to the theorem color box Exe. By doing some tests, it seems that the label takes the counter of the chapter. I also want to know what is the name of the ...
23 views

### No Pagebreak before Chapter

I'm writing in docclass report. I'm writing a thesis which is divided up to two different topics. I'm using \part to split the topics. After the parts I use Chapter for the the titles. But before the ...
19 views

1 vote
40 views

### Identifying a line in the .bib file

I am trying to convert a very large .bib file with approximately 500 references produced by mendeley into a readable text via TexStudio. I've cleaned up all the non latin characters and & signs ...
• 121
86 views

### Encircle text in LaTeX

I'm wondering if there is a command which allows me to encircle text like that: It is important that the line space does not change.
• 1,761
43 views

### How to shade the y>0 region of a graph

I have this graph and would like to shade the area $y\geq0$ in order to highlight it for the reader \begin{center} \begin{tikzpicture} \begin{axis}[legend pos=outer north east,legend cell ...
20 views

### Change the space between footnote line and main text only locally

From this answer, one knows that the vertical space between the footnote line and main text can be accessed via \skip\footins. But the examples in that answer all change this value globally. Is there ...
• 6,821
29 views

### Choosing typeface for verb

How can I change the typeface used by \verb? I currently have this: \documentclass{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage{fontspec} \setmainfont{Roboto Mono} \begin{...
• 131
59 views

### How can I draw a triangular Membership function of Fuzzy logic

I’ve been trying to recreate the following image in latex. The MWE I've got so far \documentclass[conference]{IEEEtran} \usepackage{geometry} \usepackage{tikz} \usepackage{lipsum} \title{A Title} \...
• 49
32 views

### \vv` is not respecting the current color [duplicate]

How to make \vv, from the esvect package, respect the current color after using \everymath Example: \documentclass[12pt, a4paper, openany]{report} \usepackage{xcolor, amsmath, esvect} \begin{document}...
• 111
21 views

1 vote
36 views

### Text at the beginning of every page

I was wondering how can I automatically insert some predefined text at the beginning of every page ? I am not talking about some kind of header, just regular text automatically added on the first line ...
• 111
49 views

### Why do control characters appear when I copy sentences from a PDF file created via LaTeX?

When I drag and copy text from PDF file that was compiled by LaTeX, often the content is not fully preserved. Diacritics are separated from characters, some math symbols change into other symbols and ...
11 views

I am writing my thesis work and I face an issue of citation numbering order. Some of my figures have citations in them which is why my citation numbering starts from List of Figures in table of ...
24 views

### Longtlbr formatting

I am trying to make a table that will span on multiples page and I am having lots of problem fixing the formatting. I included my table for reference. 1 - My project needs to be written in french so ...
1 vote
61 views

### Defining an Em Dash with Length Greater Than the Cabin Default

I have noticed that the length of an em dash is not always uniform, depending upon the font being used. Consider the following code which defines an em dash: \documentclass{book} \usepackage[T1]{...
• 5,757
16 views

### Formatting entires of ToC according to chapter/sections using titletoc/titlesec

In my book, I need my chapters to be bold-face and uppercase, my sections to be uppercase and regular, subsections to be bold and regular case and subsubsections to be italic regular case. In the text,...
43 views

### Include PDF pages in latex

I am trying to include some pages from a PDF file in my appendices section on Latex. I tried to follow : How to include PDF file in LaTex Doc from folder location? But I am still getting errors. I ...
15 views

### Using mhchem, make4ht, and cleverref issues with equation rendering

This is a follow-up question to the one answered here: Issue with mhchem and fractions in make4ht and mathml. Using that same MWE, but adding in hyperref, cleverref, and a label in the equation does ...
133 views

### tikz-cd quiver code not working

The quiver gives me the following code \[\begin{tikzcd}[ampersand replacement=\&,row sep=scriptsize] {\mathbb{Z}_2 \text{ A}} \&\& {\text{A} \\ \text{B}} \\ \\ {\mathbb{Z}_4 \...
• 543