21 votes
Accepted

Custom positions of author names, affiliations and emails in LaTeX article

You can use the below mentioned code. The screen shot of the output is attached below. You need to remove the \thanks part from the author affiliation area. This is because \thanks places the e-mail ...
  • 1,522
16 votes

How to Write Names of Multiple Authors with Shared Affiliation in ACM 2017 Template?

The problem with writing manuals is that nobody reads them... I thought I covered this in ACM manual. Here is what I wrote: You may have several authors with the same afifliation, different ...
  • 36.7k
12 votes
Accepted

Shared author affiliation in ACM Sig-proc

Insert this piece of coding just before the \begin{document} like so... % \def\sharedaffiliation{% \end{tabular} \begin{tabular}{c}} % \begin{document} and then adjust your particular 'author ...
12 votes
Accepted

How to add multiple affiliations in the tikzposter class?

You can use the authblk package: \documentclass{tikzposter} \usepackage{authblk} \title{The Title} \titlegraphic{Logo} \usetheme{Basic} \author[1]{Author A} \author[2]{Author B} \author[2]{Author C}...
9 votes

acmart: Multiple authors: all with same affiliation, one author an additional affiliation

The ACM Template discourages the use of a single \author{} for multiple authors. The Quick and Dirty Manual mentions explicitly that the template discourages the use of a "merged block" for ...
  • 586
8 votes

Affiliations with multiple lines of information

The package provides the command \authorcr for breaking lines. The documentation says this is for use within \author, but it also works in the \affil: \documentclass{article} \usepackage{authblk} \...
  • 92.5k
8 votes
Accepted

Affiliations with multiple lines of information

\protect the line breaks: \documentclass{article} \usepackage{authblk} \begin{document} \title{TITLE} \author[1]{Author1} \affil[1]{School \protect\\ University \protect\\ Email: author1@university....
  • 572k
8 votes
Accepted

Creating author blocks in beamer using authblk package

Don't use authblk. Rather set the authors in separate \columns: \documentclass{beamer} \usetheme{CambridgeUS} \usecolortheme{dolphin} \setbeamercovered{transparent} \title[Short title]{Long Title} \...
  • 572k
7 votes
Accepted

Affiliations appear in unspaced italics, possible math mode triggered by breqn package

Nice find! The revtex4-2 class loads the affiliation under a setting where the comma is made active, with replacement text \active@comma. But breqn defines the active comma in a very different way, ...
  • 1.0m
6 votes
Accepted

Multiple authors with affiliations in ACL style

Try loading the authblk package before the acl2015 package. Worked for me (I'm using acl2016 package and I was facing the same error you reported).
6 votes
Accepted

Removing 'and' in the author list

The answer is quite simple if you know where to look for it. \renewcommand{\lastandname}{\unskip,}
6 votes
Accepted

JMLR.cls package: wrong behavior of \thanks

The following addition to your preamble - before making calls to title macros - fixes the problem: \makeatletter \renewcommand*{\thanks}[1]{% \footnotemark \protected@xdef\@thanks{\@thanks \...
  • 572k
6 votes
Accepted

amsart option titlepage puts the address on the last page

The amsaddr package does not delete the author names. There are two ways to use it, straight it will print the address below each author name (but put the email addresses a footnote), with the foot ...
  • 92.5k
6 votes
Accepted

add multiple authors's footnote to springer's latex template

%%%%%%%%%%%%%%%%%%%%%%% file template.tex %%%%%%%%%%%%%%%%%%%%%%%%% % % This is a general template file for the LaTeX package SVJour3 % for Springer journals. Springer Heidelberg 2010/09/16 % ...
6 votes
Accepted

Adding Multiple Authors with Different Affiliation in LaTeX Article

Apart from correcting the typo in \author[1]{C. Author}, which should be \author[3]{C. Author} as pointed out in the comments, you can use the approach in this answer to make the emails appear on ...
  • 1,898
6 votes
Accepted

Author's affiliation at the end of the article with the article class

Here's a slightly different way to do it: \documentclass{article} \usepackage{url} \makeatletter \newcommand{\address}[1]{\gdef\@address{#1}} \newcommand{\email}[1]{\gdef\@email{\url{#1}}} \...
  • 204k
6 votes
Accepted

Address writing with multiple lines

It appears that the \address field is intended to be a single line right shifted text field (possibly comma separated) for use with \maketitle. While \newline works, it messes up the right shift. If ...
  • 71.3k
5 votes

Multiple Authors with common affiliations in IEEEtran conference template

If you have multiple authors with one or more people having multiple affiliations: Use package \usepackage{authblk} Then, at the place of authors: \author[1]{FN1 LN1} \author[1,2]{FN2 LN2} \affil[...
5 votes

How to Write Names of Multiple Authors with Shared Affiliation in ACM 2017 Template?

This may not be official, but it looks good: \author{Author1, author2, ... author n} \affiliation{ \institution{place} \streetaddress{street} \city{town} \state{...
5 votes

Author's affiliation at the end of the article with the article class

If typesetting it manually is ok for you, you can use: \documentclass{article} \usepackage{authblk} \AtEndDocument{% \par \medskip \begin{tabular}{@{}l@{}}% \textsc{Addresses of Author A}\\...
  • 49.7k
4 votes
Accepted

How to add multiple affiliations (institutes) to one single author in beamer class?

Meanwhile I found a very straight forward approach by try and error. Multiple affiliations can just be included by using a comma inside of the \inst command. For my example, it would look like this: \...
  • 388
4 votes

Same affiliation for all authors without extra packages

For cleaner definition, another solution is to use the \publishers{} field of Koma-Script classes. \documentclass{scrartcl} \title{Foo} \author{Author One \and Author Two} \publishers{Affiliation} \...
  • 11k
4 votes

Indicate corresponding author in llncs tempate

I hope you found your answer. If someone else stumbles upon this question, here is what they need to do. First, add the following package. \usepackage[misc,geometry]{ifsym} Then, add it within the \...
3 votes
Accepted

Can't make an article with titles in two languages

Original solution Using the titling package the following should work: \documentclass[12pt,a4paper]{article} % Needed for cyrillic \usepackage[T2A]{fontenc} \usepackage[utf8]{inputenc} ...
  • 1,704
3 votes
Accepted

Error when >9 affiliations are added in PNAS (pnastwo.cls) LaTeX template

The problem here is that the class uses symbols to typeset the affiliations through the kernel's \@fnsymbol and the kernel only provides nine definitions for the symbols used; attempting to use more ...
3 votes

Revtex 4.1 multiple affiliations

This can be accomplished by selecting the class option superscriptaddress in documentclass. \documentclass[ reprint, superscriptaddress, amsmath,amssymb, aps, pra, ]{revtex4-2}
3 votes

How to add multiple affiliations (institutes) to one single author in beamer class?

I think beameruserguide (Section 10.1: Adding a title Page, page 87) shows a good solution. \author[author1]{author1\inst{1}$^{,}$\inst{2}} The short author name (which is in between [...]) will be ...
  • 130k

Only top scored, non community-wiki answers of a minimum length are eligible