New answers tagged margins
1
Well, usually a master thesis would use class report or book instead of article (because you will need \chapter{} to give your thesis a structure) ...
Nevertheless see the following minimalised code:
\documentclass[a4paper,twoside]{article} % <============================ report??
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[%
...
1
This version modifies the amsthm proof environment. The advantage is that you can break the page in the middle of a proof.
\documentclass{article}
\usepackage{lipsum}
\usepackage{amsmath}
\usepackage{amsthm}
\usepackage{showframe}
\makeatletter
\renewenvironment{proof}[1][\proofname]{\par
\pushQED{\qed}%
\normalfont \topsep6\p@\@plus6\p@\relax
\...
1
Tex is not conceived to manage paragraphed footnote. Reledmac use an hack, which is very sensitive to geometry. As explained on § 19.1.6 of the handbook, you may have to redefine.
In you case, i get something correct with footfudgefiddle
\documentclass[10pt, twoside]{memoir}
\usepackage{polyglossia,xunicode}
\usepackage[papersize={16cm, 22cm},textheight=17....
0
Note that your header doesn't fill the space reserved for it. Nor does the text reach the top of the text area. (The first baseline is \topskip below the top.)
\documentclass[10pt, twoside]{memoir}
\usepackage[papersize={16cm, 22cm},top=2.5cm,headheight=4.22mm,headsep=2.78mm,
bottom=2cm,footskip=.5cm,left=2.35cm,right=2.75cm,twoside,showframe]{geometry}
...
4
See if the following may help you:
\documentclass{article}
\usepackage{lipsum}
\usepackage{amsthm}
\newlength\myproof
\settowidth\myproof{Proof. }
\begin{document}
\begin{proof}
\begin{minipage}[t]{\dimexpr\linewidth-\myproof}
\lipsum [1]
\end{minipage}\vskip-\baselineskip
\end{proof}
\end{document}
Addendum:
You can ...
2
I delayed my answer due to lunch :-)
I would try the following:
\documentclass[12pt, a4paper]{report}
\usepackage{bm}
\usepackage{mathrsfs}
\usepackage{amssymb, amsthm,
mathtools,
nccmath}
\usepackage{siunitx}
%---------------- show page layout. don't use in a real document!
\usepackage{showframe}
\renewcommand\...
1
With footnotesize and a bit less space between the columns the table fits inside the margins:
\documentclass[12pt, a4paper]{report}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{bm}
\usepackage{nccmath}
\usepackage{amsfonts, graphicx, verbatim, mathtools,amssymb, amsthm, mathrsfs}
\usepackage{array}
\usepackage{enumitem}
\usepackage{...
0
this link might help you: How do I properly resize an array?
Also, I tried to follow the link to modify your code and this is what I got:
\documentclass[12pt, a4paper]{report}
\def\A{A}
\def\B{B}
\def\false{\ne}
\def\true{=}
\usepackage{graphicx,amsmath}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{bm}
\usepackage{nccmath}
\...
0
In my opinion, it would be simpler to add the thing as a verbatim environment at the end of the job, filling the data manually. After all, it's a one shot.
With the macros, you can use \hangindent.
\documentclass{scrbook}
\usepackage{fontspec}
\newfontfamily{\codefont}{CMU Typewriter Text} %{TeXGyrePagella}
\newcommand{\poemauthor}{Hugo Ball}
\newcommand{...
1
If you are writing a "report",
then
\documentclass[12pt,twoside]{report}
\usepackage[left=2in,right=1in,top=1in,bottom=1in]{geometry}
\usepackage{lipsum}
\begin{document}
\lipsum[1-10]
\end{document}
2
Here is the way:
\documentclass{scrreprt}
\usepackage{lipsum}
\usepackage[outer=7cm, inner=3cm, marginparwidth=4cm, marginparsep=10mm, showframe]{geometry}
\let\oldpart\part
\def\part#1{\newgeometry{marginparwidth=0cm,marginparsep=0cm,showframe,inner=0cm,outer=0cm}\oldpart{#1}\restoregeometry}
\begin{document}
\part{test}
\chapter{Test}
\lipsum[1-3]
...
1
addmargin uses a "trivial" list. Therefore it makes new paragraphs.
You could use tables to get the desired result:
\documentclass{scrbook}
\usepackage{array}
\setcounter{tocdepth}{\chaptertocdepth}% Allow only \chapter in ToC
\newcommand{\poemauthor}{Hugo Ball}
\newcommand{\bknr}{1}
\newcommand{\isbn}{xxx-xxxxxxxxxx}
\newcommand{\copyrightyear}{2019}
\...
1
Please see that an exact solution depends on how you define 1 Inch in cm or mm. I simply use here the fixed version for
1 Inch = 25.4 mm.
Be aware of rounding errors for the conversion of Inch to mm ...
Because you gave no mwe (please next time add one!) I can only guess what you are doing.
Please see the following MWE containing the "formula" to get ...
3
As daleif said look at memdesign.pdf (> texdoc memdesign). That shows some 32 different page layouts from several countries from 1523 to today, which can all be replicated within memoir. But, generally speaking the spine margin is half the outer margin so that when a book is opened the outer margins and the inner margin are equal. The memoir class ...
1
Well, you can do a simple bad hack: Add comand \vspace*{-10mm} (change the length for your needs) before the table building your title, like:
\thispagestyle{empty} % This command disables the header on the first page.
\vspace*{-10mm} % <==========================================================
\begin{tabular}{p{15.5cm}} % This is a simple tabular ...
1
It's very simple with package geometry.
Unrelated: subfigure is obsolete and no more maintained. It's better to use subcaption and its eponymous environment.. Also, don't forget to load the T1 font encoding since italian has accented letters. Last, for your quoting at the beginning of chapter 1, I suggest you take a look at the possibilities of the epigraph ...
1
Setting the value of \tabcolsep to 3.5pt does the job.
I took the liberty to simplify the code (I don't see why the 4 first columns have the S type, so I replaced them with c). Also, I think it looks better to have their columns heads set with multirow.
\documentclass[journal]{IEEEtran}
\bibliographystyle{IEEEtran}
% *** CITATION PACKAGES ***
\...
3
This here seems to do the trick:
\setuplayout[backspace=6cm,leftmargin=4cm,width=14cm]
\setupmarginframed[inmargin][align=flushleft]
\starttext
\showframe
\inmargin{
\input ward
\startitemize
\item Something something this should be aligned just as if it was in the main text
\item But it is not, it just looks weird and wrong.
\stopitemize
\...
2
Of course there is. Read chapter 2 in the documentation (> texdoc memoir).
\documentclass{memoir}
\usepackage{lipsum}
\setlrmargins{2in}{1in}{*}
\checkandfixthelayout
\begin{document}
\lipsum
\end{document}
where \setlrmargins{<spine>}{<edge>}{<ratio>} sets the spine margin, the outer margin, or one of these and the ration between ...
Top 50 recent answers are included
